Reference Dell XDS Wifi 12 questions
I see that many people have had problems with the dropping of WiFi etc...
The problem I encounter is the wifi is connected but I saw significant packet loss. 25% packet loss when another device with me connected to the same wifi network 0.
I did another test this morning near the wifi router. It was better, but he still ignored packets when another device had not. Did someone come to decent resolution to this problem? Is a dongle USB, the only option at this point?
Tags: Dell Products
Similar Questions
-
Reference Dell GX620 Power Supply Question
What's up guys, I'm new here, and earlier this month my school made me a job on time partial like the public library IT Assistant, because I took IT out classes at my high school. I'm 18, and I know a little about computers. My question is, one of our computers at the library, a GX620, the power supply of the machine went wrong and that we have at the back of the library are detached power supplies for GX520, I asked my professor of computer SCIENCE at the school if it would be prudent to go and try to install the GX520 power in the GX620, but I'm still not sure if it will be a sure idea It would cause a fire? He would burn something inside the PC? My COMPUTER teacher told me to check the amps and volts on feeding 620, and I checked, the GX620 power supply has a maximum of 275 WATTS, while feeding GX520 has a maximum of 220 WATTS, is completely switch the GX620 bad diet, with the GX520 spare?
And you know that the PSU is bad, how... ?
First, you will need to know if the spare GX520 PSU's for the same (Tower, Desktop, small, ultra compact) form factor as the GX620 before you can even think to use it because if the form factor of the PC is different, it cannot even between.
There is a block of POWER W 220 here that says: it adapts GX520 both GX620 Desktop. But if you do not have a GX620 Desktop, this power supply may be a bit low power if the original was 275W.
That said, you can get a power supply for the GX620 here for less than $30, depending on the form factor. If your existing GX620 power SUPPLY PSU 275W, it seems you might have a small GX620 form, based on the specs of the PSU indicated on this page.
BTW: Please delete the telephone number of your post. This is a violation of the terms of the forum to use to post personal information, not to mention that it is never a good idea to post personal information in any open forum.
EDIT: The forum dislikes the second hyper link is here:
[16] http://www.discountelectronics.com/category?Product_Model=3&category=2&PRODUCT_TYPE = 16
-
Reference Dell 4600 ram upgrade questions
a crucial site for dell 4600 scanner and ram orderly and upgraded from 256 and added 2 512 sticks. When I restarted I got a message that the operating system supports no more than 256 MB of ram on a 32 bit...? Owner's manual says I can go to 1 GB. Tried to use only the 2 512 taking the 128 (in cracks) but get the same message. Geek squad checked the ram and agreed it is of the appropriate type, but something may need to be updated in the bios? What to do?
-
Reference Dell M1000e + aggregator MI/O port mapping
Hi all
I intend to install a new chassis Dell M1000e with Dell M/o aggregator. During the time of solution, I have a few questions about correspondences between the physical uplink with NDC blade ports ports. A Please check the config below and specify my queries?
My hardware:
- 1 x Dell M1000e
- 2 x M i/o aggregator (A1 & A2)
- 16 x M630 Blade (Qlogic 57840 S ANC four ports card)
Reference DELL M/o aggregator:
(reserved for Future use) module QSFP + 2 ports (Port No1:33 - 36 & No2:37 Port-40)
I want to use these two modules for my blades 4-port Quad and the confusion I had, how to associate these 16 ports (8 ports of each module) to the server blade and the amount of bandwidth I will get by blade with redundancy.
Module 4-port SFP + 10 GbE (Flexi-O of the Bay) (Port No.: 41-48)
Module 4-port 2/4/8 Gb FC FlexIO (Flexi Bay 1) (Port No.: 49-56)
FYI - I would like to install ESXi 6.0 on all blades
Thank you!!
Vinay
Oriented server ports are configured automatically as part of the aggregation of links groups if the server is configured for the LACP Protocol. Static GAL is not supported.
You will use the segregation network VLAN. A VLAN for network traffic and the other for the CF. Here are the commands to configure interfaces for different VLANS.
Unidentified:
Dell (conf) # tengigabit interface 0/16
Dell(conf-if-te-0/16) # vlan unidentified 4
Output Dell(conf-if-te-0/16) #.
Tag:
Dell (conf) # tengigabit interface 0/16
The tag vlan Dell(conf-if-te-0/16) # 4
Output Dell(conf-if-te-0/16) #.
Traffic from servers will follow the path of the VLAN. For example, if an internal server, facing the port is set to VLAN 4, that traffic will be transmitted on the uplink port which has also set to VLAN 4.
By default, all external ports are placed in a single whole LAG. However, you can change the configuration to support several shifts of uplink. Page 159 of guys configuration takes you step by step on setting up several shifts of uplink.
The aggregator automatically configures to match the FCoE parameters used in the switches to which it connects through its uplink ports. FIP snooping is automatically configured on an aggregator. Automatically configured port channel (LAG 128) works CWF port mode. See page 86 for more information and examples of config.
For redundancy, you could stack the units together. 241 page details the process of stacking.
Page 54 of 102 of the Guide blade IO has one other diagram that details more internal server port mapping for each blade.
-
Hey guys, more of a statement than a question. If you have a Dell Sonicwall and users do "found no appropriate group" of course the same user does not exist as a local user and a domain user. This will cause problems. Took me a while to understand that >.<>
Good thought.
Thank you
Ben D
Reference Dell SonicWall
#Iwork4dell -
Reference Dell Force10 S50N time in the same newspaper
Hello
first of all, I hope that a good place to ask question re Force10 devices - if not please forgive & point me to the right place
I have following two stacked devices:
Type of system: S50N
Reference Dell Force10 operating system Version: 1.0
Reference Dell Force10 Application Software Version: 8.4.2.6Recently, I have configured a source of time using ntp. display the clock command returns good time & ntp config also seem ok.
I want to have the switch which had the correct timestamp of the date unit % hour however when logging to show browsing results shows this:
32w6d12h: STKUNIT1% m: % LACP CP...
32w6d12h: STKUNIT1% m: % LACP CP...
32w6d12h: % STKUNIT1-% M:CP CMEA...That I am, I lack to set up/set for the date & time stamped and posted in the event logs?
(I'm beginner in world Force10 and switch)
Appreciate any help
Hello
I found horodateurs service order before but I was so blind to enter config mode.
That worked very well.
Thank you very much
-
Reference Dell MD1200, H710 with R720XD
Hello
Asked if drieves NL - Seagate SAS (ST4000NM0023) can be used in the following configuration.
Reference Dell Perc H710 + PowerEdge R720XD MD1200.
The answer that I gave them was who should be tested. Because in documentation it is stated that mark Dell hard disks should be used.
I know that some controllers Perc will give a warning each time if not dell disks are used, but they work without problems. Is this the case even when you use a box MD1200?
Kind regards
Indrek
INDRP,
You're right that only some drives are tested and supported in the bays of the MD. Here is a link that will take you to one of the manuals that list all drives supported for 1200 MD and MD1220.
FTP.Dell.com/.../PowerVault-md1200_Reference%20Guide_en-US.pdf
Please let me know if you have other questions I would be happy to help.
-
Reference Dell 1700 crashed and I have no backup
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reference Dell 1700 crashed without backup whats a girl to do
lost all programs can run does not help
Reinstall Wndows.
Reinstall all your programs from the original media or downloaded files you have saved on an external drive.
Reinstall all your data from the backups that you made on an external drive.
If you have not, you're out of luck.
-
Reference Dell vostro 1520 with windows xp prof... Not reading CD/DVD
Reference Dell vostro 1520 with windows xp prof... Unable to read & play any cd/dvd.tried mr.fixit content but no solution at the moment.
Hello
1 have. what fixit you tried?
2. don't you make changes to the computer before the show?Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116Important: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in the window.
-
Original title: unable to print. Reference Dell 944 communication usb port is not available.
Message says 'check your firewall settings to ensure the printer communication is not blocked. Printer has worked faithfully until the problems started with the XP Home operating system. To cut a long story short ram upgraded to 2 GB, all unnecessary programs identified and technician Microsoft contacted to solve problems. I was informed of problems caused by 3rd software party conflicts. Kaspersky was apparently the culpit. Dell Inspiron 32 now much faster but the printer will not work little matter what I do. I tried to reload with drivers & utility CD, drivers uninstalled & reinstalled on the site of all nothing is? Can someone help?
DavidNicholsonXN,
How to download and install drivers in the correct order
also try to read...
The owners of all-in-one printer Dell 944 thread (W7)
Let the printer after Kaspersky
Rick
-
Reference Dell pc with xp family. Restart to the logon screen
Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?
Peek into the registry to find clues.
Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information. Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.
1. right click on my computer and select Properties.
2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
3 clear the automatically restart box and OK your way out system properties.Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.
How to configure Windows XP to start in a "clean boot" State
John -
Reference DELL T420 - battery on PERC H710 adapter controller
Hello
I received a yellow warning
Reference DELL T420 'Battery on PERC H710 adapter controller'
What it means?
What should I do?
Order the new battery?
It is a simple replacement mission?
Is it essential?
Update:
test URL
http://www.Dell.com/support/article/us/en/04/SLN130018
Have nothing, everything seems fine now...
Thank you
It is normal so he can make a full discharge of the battery as part of his learning cycle every 90 days. Make sure that this isn't that. If this isn't the case, the reason, give it 24 hours. If it is fully charged, update the system (including RAID firmware, driver first) firmware. If not fully charged yet or it reproduces quickly, then replace the battery - power down to replace.
-
Reference Dell 3110cn of Laserjet + os El Capitan
My MacBook Pro (2009) stopped my Dell printer. News on this please.
Hi deaconjo,
as I had the same problem, I found a solution for my El Capitan MacPro 2008:
Search for the following installation program:
3130cn_Installer_And_Application_Dell_A04_MAC.dmg
Inside this package you will find the driver for 10.7 and higher. After installing the package I could add an IP printer with this driver:
Reference Dell 3130cn Color Laser v3017.104 PS
With this driver installed, I can use my printer Dell 3110cn without problem.
Perhaps it might help you too.
Concerning
-
try to do a full install on my dell optiplex 760 Tower, but even though I have the original disc from dell, I have more questions... I get all the features and everything all the way to the last step and everything, but then I think it will be a success, it doesn't say windows startup and let me down in me leaving with a blue screen no signal on my LCD 15 '... If someone would have an idea and would be kind enough and generous to help me as a fellow geek... I mean built my first computer, lived the whole 9 yards, but still cannot understand or resolve this situation... I would greatly appreciate any help of knowledge all my colleagues people could give... .i currently do not have a phone, but is will can always happen to me by message on his or [NOTE from the Admin: Email deleted in accordance with the TOU strategy identification], thank you for your time and also gratitude.
Best of this post in the Forum OS from Microsoft here:
http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx
Bev.
-
Reference Dell 2007FP vs HP zr22w
Hi guys, I use t410s now. You want to find an IPS monitor. Currently have two choices.
Reference Dell 2007FP (handed to nine 30-day warranty) $95
HP zr22w (new, 3-year warranty) $175
What would be a good choice?
Not for the game.
But need good color, good text, Word process, sometimes a movie.
The HP zr22w DP, is better than the VGA to connect to my T410s?
Thank you!
Your information is so helpful. But I think that I can not check the number helpfully I ordered from DELL FINANCIAL SERVICES. Thank you very much!
Maybe you are looking for
-
Satellite L450D - 11H - can I downgrade to Windows XP?
Hi guys I have a Toshiba Satellite L450D - 11 H with the following specifications -AMD Sempron Processor TR-42-DVD - RW SuperMulti drive (Double Layer)-1024 MB DDR RAM (800 MHz)-15.6 "screen (1366 x 768) TruBrite high brightness I was wondering if th
-
metro tiles does not work although they pan and are very dark
Hi just received a pavilion with radeon amd metro tiles work well some jerks and are very dark can't see the characters on the screen on some of the tiles How to correct?
-
Disabled Options of Outlook 2007 indexing and advanced search options
Im running Windows 7 RC1 Ultimate x 64 and I recently started having a problem with Outlook 2007. Somehow all advanced search options (hit the double arrow to the right of the Inbox "search" field to specify, body, subject, etc.) are disabled - that
-
Separated from this thread. No it did not help at all I go still a load of dates that do not have I would like to know how to remove them so I can free up space on my pc
-
How can I reinstall a driver for my network adapter? Accidentally uninstalled
How can I reinstall a driver for my network adapter internet explorer9 on my laptop Toshiba Satellite C655-S5514 [Moved]