Reference owner Xcontrol

Similar Questions

• APEX: Can we add additional items in tabular form existing

  Hi Experts,

  I built a nice tabular form with all the buttons and whistles.  All goes well until my request for the user to add another

  the point in the form of tables and here's my night Mare, I have this error code

  failed to parse SQL query: ORA-01403: no data found 

  I pinned it down to the process of the ApplyMRU or ApplyMRD; because once I delete these.

  I see the tabular presentation.

  But when I tried to manually recreate the SRM process, with the same criteria, I have the same error code

  Is this a Bug or just the way the behaviour of tabular presentation?

  What should I do to fix the error?

  Please don't tell me that I have to rebuild the tabular presentation.  :-(

  Hi JAS-Oracle,

  JAS-Oracle wrote:

  Hi Experts,

  I built a nice tabular form with all the buttons and whistles.  All goes well until my request for the user to add another

  the point in the form of tables and here's my night Mare, I have this error code

  failed to parse SQL query: ORA-01403: no data found
  

  I pinned it down to the process of the ApplyMRU or ApplyMRD; because once I delete these.

  I see the tabular presentation.

  But when I tried to manually recreate the SRM process, with the same criteria, I have the same error code

  Is this a Bug or just the way the behaviour of tabular presentation?

  What should I do to fix the error?

  Please don't tell me that I have to rebuild the tabular presentation.  :-(

  Here an other elements means another column in the form of tables... Right?

  This column to another is the same table on which you build your tabular presentation.

  If this is the case, then you must add the extra column in your select query and a few changes in the properties of this column, no need to do anything with the process of the MRU.

  for that go to report attributes-> change the newly added column-> slot of the attributes of tabular form

  The Table - name of the schema reference owner

  The Table name - name of the reference table

  Column name of the column in reference

  If this isn't the case then of additional information on the same.

  If the column is in the other table, to check out this blog: manipulate several tables in a tabular form

  or create the sample on the apex.oracle.com, allowing the user to resolve your issue quickly.

  ,

  Hope this helps you

  Kind regards

  Jitendra

• How to remove referred belonging to sys of meshes

  Hi experts
  
  I have a beginner questions:
  
  After you set the sql tuning sets (sts).
  Now I want to delete some of them! I have to remove their referred in the first instance:
  

  select * from DBA_SQLSET_REFERENCES ;
  SQLSET_NAME           SQLSET_OWNER SQLSET_ID ID OWNER CREATED DESCRIPTION
  MY_STS             HR     1     1     SYS     08.03.12     created by: SQL Tuning Advisor - task: SQL_TUNING_1331216081407
  MYWORKLOAD_1     SH     20     37     SYS     05.04.12     Access Advisor task SQLACCESS5537425          " <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<"
  STS_20120603_01     SH     21     39     SYS     03.06.12     created by: SQL Tuning Advisor - task: SQL_TUNING_SH_STS_20120603_01
  MYWORKLOAD_1     SH     20     35     SYS     05.04.12     created by: SQL Tuning Advisor - task: SQL_TUNING_1333609886368
  MYWORKLOAD_1     SH     20     36     SYS     05.04.12     created by: SQL Tuning Advisor - task: SQL_TUNING_1333610666557
  STS_20120603_01     SH     21     40     SYS     03.06.12     created by: SQL Tuning Advisor - task: SQL_STS_20120603_01
  $$SQLA$$_1     SYS     18     32     SH     03.04.12     $$SQLA$$ (Internal use only): SYS.WORKLOAD_240
  $$SQLA$$_1     SYS     18     33     SH     03.04.12     $$SQLA$$ (Internal use only): SYS.WORKLOAD_240

  So I tried for example to remove the reference 37 as user sys and got the error:

  DECLARE
  BEGIN
    -- Delete the reference.
    DBMS_SQLTUNE.remove_sqlset_reference (
      sqlset_name  => 'MYWORKLOAD_1',
      reference_id => 37);
  END;
  /
  
  ORA-06512: in "SYS.DBMS_SQLTUNE_INTERNAL", Zeile 15117
  ORA-06512: in "SYS.DBMS_SQLTUNE", Zeile 5501
  ORA-06512: in Zeile 4
  13754. 00000 -  "\"SQL Tuning Set\" \"%s\" does not exist for user \"%s\"."
  *Cause:    The user attempted to access a SQL Tuning Set that does not exist.
  *Action:   Check the speelling of the SQL Tuning Set name and retry
             the operation.

  and as a user sh and got:
  

  DECLARE
  BEGIN
    -- Delete the reference.
    DBMS_SQLTUNE.remove_sqlset_reference (
      sqlset_name  => 'MYWORKLOAD_1',
      reference_id => 37);
  END;
  /
  
  ORA-06512: in "SYS.DBMS_SQLTUNE_INTERNAL", Zeile 15117
  ORA-06512: in "SYS.DBMS_SQLTUNE", Zeile 5501
  ORA-06512: in Zeile 4
  13759. 00000 -  "User \"%s\" cannot remove reference \"%s\"."
  *Cause:    The user attempted to remove a SQL Tuning Set reference that
             does not exist. The user might not own the reference.
  *Action:   Check the reference ID and the reference owner and retry
             the operation.

  I spent a lot of time looking for the right oracle documents but can not find them!
  
  Please help me find the right document or how to easily remove the cracks
  
  Thank you and best regards
  
  hqt200475
  
  Published by: hqt200475 on June 6, 2012 03:08
  
  Published by: hqt200475 on June 6, 2012 04:42

  It looks good in my test database

  Connected to:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  With partitioning, Oracle Label Security, OLAP, Data Mining,
  Oracle Database Vault and Real Application Testing options

  SQL select sqlset_name, id, SQLSET_OWNER, DESCRIPTION of DBA_SQLSET_REFERENCES
  SQLSET_NAME ID SQLSET_OWNER DESCRIPTION
  ---------------------- ------------------------------------------------------
  SQLSET_KARAN_33 1 SYS SQL Tuning Advisor - task: karan_task

  SQL > START
  -Delete the reference.
  () DBMS_SQLTUNE.remove_sqlset_reference
  sqlset_name-online "SQLSET_KARAN_33."
  reference_id-online 1);
  END;
  /
  PL/SQL procedure successfully completed.

  Concerning
  Karan

• Location of the Alienware 17 SSD drive?

  I own an Alienware 17 that I bought in January this year.  It came with an SSD of 256 MB.  That I found woefully inadequate for my purposes.  I'm at the clean temporary files every day so that I do not fill the drive.  I bought a new 1 TB Samsung SATA III SSD, but I can't find where the current SSD is installed.  There are two ports for HDD1 and HDD2 which are easily accessible.  I've added two 1 TB drives to these two, but I have no idea where the SSD is without tearing the laptop all out to find.  I watched the reference owners manual and there IS NO remove OR replace the SSD drive?

  Thank you

  Have

  The only left port is the mSATA located under the palm rest.

• Get references from articles inside an XControl

  I would like to build a property for an XControl in order to get the references to the controls in the front panel, something like ownership of the cluster "control []".

  I tried to get the references of the façade and pass them to the main VI through view state and a property to read the values, but when I pass the notes obtained in this way to a property node I get an error 1055 saying that the object reference is not valid.

  Thank you

  Hi daniele88,

  Unfortunately I don't know the answer to your problem,

  but I suggest you put a minimum version of your problem in the code

  and the link here, that might help ppl troubleshooting

  (in which case it is not something obvious why this will not work)

  the only thing I can suggest on the top of my head,

  is to make sure that you have the 'change data' or 'changed state' set 'correctly '.

  If the information is properly stored, to be accessed by the xcontrol property

  but maybe that's not it.

  Good luck

• Using a reference to an xcontrol in a class

  Hello.

  I want to use dynamic distribution OOP-methods to write to Xcontrols on the face before of the main VI. In the image below, I illustrated a very simple example, using static methods.

  However, as soon as I introduce a strict reference to the Xcontrol anywhere in the class, the Xcontrol becomes locked, even when all the VI project are closed. I know, I can unlock the Xcontrol, edit and lock again.

  However, in my real project, I have an extra Singleton who is used as well in hand, as well as in one of the Xcontrols. This class becomes completely closed, which means that there is no possibility to it to modify the project or do a search for the appellants. The latter is quite annoying because it makes your research of appellants impossible, given research is done on VI in memory.

  Is there a reason for this block, when nothing but the project is open, is there another solution?

  Herbert

  

  Herbert wrote:

  Is there a reason for this block, when nothing but the project is open, is there another solution?

  I don't have any experience with this, so I'm not aware of a solution, but you can perform a search to find other people asking about it, because it was developed before. Basically, the class loading all their live when they charge (which happens when you open the project). When loading a VI call a XCtrl, it blocks the XCtrl. combine the two and it is your right.

• Can I use an XControl reference in a class?

  LabVIEW help stipulates that "a private data control cannot contain an XControl or an XControl refnum", while previous reviews have shown that the problems occur in a built application, but not in the development environment: http://forums.ni.com/t5/LabVIEW/X-Control-Distribution-Bug/td-p/1132058 this question seems to have been given the CAR #210033 http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Allow-X-Control-X-Control-Reference-as-a-Class-Data-Me... with the note that it only covers the XControl reference , not the XControl himself, as a member of class private data.

  I just tried a simple application with a XControl reference in the private data of the class, and it seems to work without error in the application built in development (2012 f3 (12.0.1f3) SP1 32-bit LabVIEW).  I have looked through the last few lists of bug fixes and cannot find this CAR in one (2011 or 2012), even if the documents say they list only a "subset".

  Can anyone confirm if the #210033 CAR has been fixed?  I don't want to go too far down this path if she will introduce problems at some unknown point.

  According to the database of the CAR, this CAR has been corrected in LabVIEW 2010.

• Reference Dell 966 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  I recommend that you use these settings to the recommended wireless router for better communications.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Reformatting the hard drive and reinstall windows 7 has done the trick. This really delete all the driver files! With a clean machine, I was able to install the printer without problem in Vista SP2 compatibility mode. Not only so, but the other two Windows 7 PCs on my network domestic also saw the printer and installed it.

  It seems that the uninstall utility doesn't work unless you install the drivers correctly. If, as many of us have done, the drivers are installed without using the compatibility mode there are some files that get somewhere the uninstall program cannot reach. I just checked the section of drivers from the support page and can find no reference to installation in compatibility mode, the Council States that it is compatible and install the Vista driver. Always if Dell puts in place all the information, it should would probably be no need for forums like this.

  Just a pity that it took a format and reinstallation of the entire system to operate. Live and learn

  see you soon

• Reference Dell 922 Photo all-in-One Printer owners thread (W7)

  Please follow the instructions below and then tell me what is happening...

  Please make sure you have all the Windows updates, especially the .net framework (required to run many applications) and the last Java.

  Unplug your printer.

  Download and run this patch (a MUST for Vista machines) to completely remove the printer from your computer. Run the patch until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  jmlorey,

  You have disconnected the 922 printer.

  Uninstalled the printer. Also Manual Printer Driver Removal, and then restarted your computer, correct? Be sure to look at the instructions of Windows 7 for removal.

  Restart your computer after removing the drivers, is ensure that pilots have disappeared.

  64-bit or 32-bit operating system? Use the Vista drivers in compatibility mode. Start, Control Panel, system, it must be registered.

  You have downloaded the Vista drivers from the first thread and then tried to install the Vista drivers in compatibility mode, correct?

  Rick

• Reference Dell A960 All - In - One Printer owners thread (W7)

  Please follow the instructions and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  Unplug your printer.

  Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers. Just download the drivers you need.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers

  All other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the XP drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change the compatibility with XP SP3. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  Thanks for your advice, which helped me to solve the problem of A960 Win 7 (64-bit).

  But in my case the following worked, and it's a little easier:

  1. If you have connected your A960 slot USB windows 7 hoping would provide the right driver via windows update: just remove the printer in Control Panel > printer > rightclick the printer > delete device.

  2. no need to use the dell clean utility. No need to uninstall under "Uninstall" since it shows that if the wrong driver was installed by windows automatically (but if you installed a wrong driver manually, you can have).

  3. download the Vista 64-bit Driver R153052.exe (or 32 bit, if applicable), links see PudgyOne post November 28, 2009 22:32.

  4. install the driver: by clicking on the first R153052.exe extract the files in e. g. C:\dell\drivers\R153052. Then right click the setup.exe in this file and change compatibility for Windows Vista Service Pack 2.

  That worked perfectly in my case...

• Muse crashes when I record, null zero references dangling length data report and or owners?

  

  Please help, yesterday as I tried to save a new page on my site I started getting the following messages. After looking through the forums, I tried everything to separate EACH .svg file in my site to try to return to the last saved page correctly, which then begins to give me the same error even once. I don't really know what to do more. It started after the use of 2015.2 and I have since updated to the latest version, 2015.2.1.21, and I'm STILL having this problem!

  I have not heard of something similar before. I propose an Adobe Contact support contact us | Adobe if you see no response on this forum.

• Satellite Pro M70 - what is the Bluetooth module reference number

  Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?

  You can reed one of the labels under your laptop. You can read bluetooth inside, the reference is in the left side of the label, and it will be something like this: PA3418U-BTM.

  Thank you.

  Hello

  Why you n t make a call to the service allowed in your country partner and would order a compatible BT module for your laptop?
  In my opinion, it would be the best way to get a.

  Unfortunately I m no owner of the satellite Pro M70 and, therefore, I have don t know the part number for BT. But my A210 has been equipped with an internal module of BT and PA3608U-1BTM part number

  Welcome them

• HPG60-237US repair or reference numbers

  I'm looking for the service manual for an HPG60-237US.  My research on google I find these manuals usually lead, but it escapes me.  Maybe I forgot on the HP site, somewhere, but I can't just place it.

  Can someone provide a link?

  Maybe someone can make me a reference number?  The hinge to the LCD on the base has lost its screws somehow.  If someone already has a resource that can tell me the size of the screws or the part number to the screws of the hinge or a manual, I'd be very happy.

  Thank you!

  Your owner's manual HERE

  Usually, they do not show the numbers for the screws, but take a look at the manual.

  .

• XControl in secondary

  I have an Xcontrol which works fine when I run my VI by clicking on the arrow of the execution; However, the Xcontrol does not seem to log events when the VI is executed dynamically in a secondary school.  FYI, all the other features of VI run dynamically works very well (only the Xcontrol doesn't work properly).  I need help to understand why and find a good solution.

  Thank you!

  Found.  The cluster of the view state of the references was not related to the controls and indicators on the FP.  My guess is that the event of change of State Exec within the structure of the event was not registered (this is where I would check if the references are good, and if not, then I would like to reset references.)  As a work around, I used my references within a global variable instead of the State registry view to shift.  Now, it works fine even in high school!

• XControl always locked when it is used in class - possible bug?

  Hello

  It is no different in this issue. However, I think the question is slightly different and maybe a bug. If the following steps:

  1. Create a project,
  
  
  2. create an XControl
  
  
  3. create a class,
  
  
  4. Add an instance of the XControl to a class method

  You should see that the XControl is locked all the time. This happens only when the XControl is used with a class. If the XControl is placed on a VI, in a library project or not, the XControl will only be locked when the VI that he uses is open (i.e. in memory and the XControl is running).

  It can be expected behaviours because of the way the classes are loaded; However, as a user I find that it is unexpected - is this a bug?

  Kind regards

  Steve.

  Unlike normal libraries (.lvlib), classes always loading all their members live in memory when the class is loaded in memory.  So if one of these screws using an XControl, then it will be blocked as soon as you load the class owner in memory, even if the VI is not open.  You might be able to work around this problem by right-clicking the XControl in the project and selecting "unlock the library for editing.  It would temporarily break any screws that call the XControl until you're done editing.

  Chris M