Reference Dell 966 Photo all-in-One Printer owners thread (W7)

Please follow the instructions below and then tell me what happens.

First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

I recommend that you use these settings to the recommended wireless router for better communications.

Unplug your printer. Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

If you use Windows 7 also try... Driver Manual printer removal

Restart your computer.

Download the correct drivers.

XP drivers

Vista 32-bit drivers

64-bit drivers

All other drivers

Install the appropriate drivers. You will be asked when connect you your printer (power on)

To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

If you use Windows 7, use the Vista drivers in compatibility mode.

Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

Scanning

Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

Scan wireless, use the buttons to scan on the printer.

Rick

Reformatting the hard drive and reinstall windows 7 has done the trick. This really delete all the driver files! With a clean machine, I was able to install the printer without problem in Vista SP2 compatibility mode. Not only so, but the other two Windows 7 PCs on my network domestic also saw the printer and installed it.

It seems that the uninstall utility doesn't work unless you install the drivers correctly. If, as many of us have done, the drivers are installed without using the compatibility mode there are some files that get somewhere the uninstall program cannot reach. I just checked the section of drivers from the support page and can find no reference to installation in compatibility mode, the Council States that it is compatible and install the Vista driver. Always if Dell puts in place all the information, it should would probably be no need for forums like this.

Just a pity that it took a format and reinstallation of the entire system to operate. Live and learn

see you soon

Tags: Dell Peripherals

Similar Questions

  • Reference Dell 922 Photo all-in-One Printer owners thread (W7)

    Please follow the instructions below and then tell me what is happening...

    Please make sure you have all the Windows updates, especially the .net framework (required to run many applications) and the last Java.

    Unplug your printer.

    Download and run this patch (a MUST for Vista machines) to completely remove the printer from your computer. Run the patch until it prompts you to restart your computer.

    If you use Windows 7 also try... Driver Manual printer removal

    Restart your computer.

    Download the correct drivers

    XP drivers

    Vista 32-bit drivers

    Vista 64-bit drivers

    All other drivers

    Install the appropriate drivers. You will be asked when connect you your printer (power on)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    If you use Windows 7, use the Vista drivers in compatibility mode.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Replace the Vista compatibility (try Vista SP2). Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

    jmlorey,

    You have disconnected the 922 printer.

    Uninstalled the printer. Also Manual Printer Driver Removal, and then restarted your computer, correct? Be sure to look at the instructions of Windows 7 for removal.

    Restart your computer after removing the drivers, is ensure that pilots have disappeared.

    64-bit or 32-bit operating system? Use the Vista drivers in compatibility mode. Start, Control Panel, system, it must be registered.

    You have downloaded the Vista drivers from the first thread and then tried to install the Vista drivers in compatibility mode, correct?

    Rick

  • How to get the Dell 944 Photo all-in-one printer driver to work

    I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

    S Pipkens,

    First run delete print jobs to remove all print jobs stuck in the queue.

    Unplug the printer.

    Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

    Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

    Download and install the proper drivers from...

    Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

    Firewalls and anti-virus programs will block communications.

    Rick

  • Reference Dell V 313 all-in-One Printer

    Recently, our 313 of V Dell all-in-One printer will print only an execution of an order given... the number of pages is irrelevant. Next time when I want to print, the printer icon small appears on the lower lip, the graph bar showing the beginning of printing appears, just at the top, and the printer sounds as if it starts to print, but only a couple of "grants", then a pause, then the printer stops, with the icon and the bar graph disappears from the display.

    The only way to get the printer to print the following command is to close all files, the printer and restart the computer. As soon as the computer has been restarted, and the printer turned on, without any other order, the printer starts printing the desired item.

    I uninstalled the drivers from Dell and downloaded the drivers from Dell official website of Dell, to see if this action makes a difference. I don't have.

    I'd appreciate deeply any suggestions on how I can adjust our PC to eliminate this mysterious hang up. Thank you.

    Porzel

    The system Dell printer is not compatible with Internet Explorer 11. Uninstall the present and go back to IE 10 and everything will be resolved. Is not ideal, but I hope that Dell of MS will come up with a better solution.

  • Reference Dell A960 All - In - One Printer owners thread (W7)

    Please follow the instructions and then tell me what happens.

    First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

    Unplug your printer.

    Download and run this patch to completely remove the printer from your computer. Run the fix, a MUST on Vista machines, until it prompts you to restart your computer.

    If you use Windows 7 also try... Driver Manual printer removal

    Restart your computer.

    Download the correct drivers. Just download the drivers you need.

    XP drivers

    Vista 32-bit drivers

    Vista 64-bit drivers

    All other drivers

    Install the appropriate drivers. You will be asked when connect you your printer (power on)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    If you use Windows 7, use the XP drivers in compatibility mode.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change the compatibility with XP SP3. Then, install the appropriate drivers. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

    Thanks for your advice, which helped me to solve the problem of A960 Win 7 (64-bit).

    But in my case the following worked, and it's a little easier:

    1. If you have connected your A960 slot USB windows 7 hoping would provide the right driver via windows update: just remove the printer in Control Panel > printer > rightclick the printer > delete device.

    2. no need to use the dell clean utility. No need to uninstall under "Uninstall" since it shows that if the wrong driver was installed by windows automatically (but if you installed a wrong driver manually, you can have).

    3. download the Vista 64-bit Driver R153052.exe (or 32 bit, if applicable), links see PudgyOne post November 28, 2009 22:32.

    4. install the driver: by clicking on the first R153052.exe extract the files in e. g. C:\dell\drivers\R153052. Then right click the setup.exe in this file and change compatibility for Windows Vista Service Pack 2.

    That worked perfectly in my case...

  • Reference the Dell Photo all-in-One Printer 964 Installation

    I have a Dell Dimension E310 and a Dell Photo all-in-One Printer 964.  I am running Windows XP.

    My printer was working fine, but the scan did not work right.

    I uninstalled Dell 964 printer to help to change / remove programs.

    I tried to reinstall Dell 964 Printer by using the Drivers and Utilities CD: printer all-in-one Photo Dell 964 CD came with my computer.  I had this CD for 6 years and have used it to reinstall the printer before.

    I put the CD in D drive.  Sometimes, it will open the installation box (sometimes it isn't) where I can choose to install to a personal computer or a computer on the network.  I click on personal computer and wait.  Nothing happens.  In the past this action begins the process of installing the printer.

    Sometimes, I put the CD in D drive and nothing happens.  In this case, I opened my computer then right click on the D drive (which shows the Dell CD).  I click Open.  Sometimes, the installation box opens.  Sometimes it is not.

    Sometimes, a box opens indicating that the computer has detected new hardware - Dell Photo all-in-One Printer 964.  Operating instructions say if ensure that the Dell installation CD is in drive D, and then click Next.  He moves to another window where it says that it is looking for the CD.  Just, it maintains the search but can't find it.

    My CD of Installation is worn?  Is that why the computer can't find it?  Or something else going on?  Download the software of the printer from the Dell website?  Can I get a new CD Drivers and Utilities: Dell CD 964 Photo all-in-one printer?

    I have a limited knowledge of the computer.

    I appreciate any help anyone could offer.

    Thank you.

    Hi ColemanCreative,

    Please follow the instructions mentioned in the link below to uninstall and reinstall the drivers for your Dell Printer 964. Make sure there is no document in the queue before you uninstall the drivers.

    How do I uninstall the existing printer drivers: http://dell.to/18M5Oki

    If the problem persists, follow the steps mentioned below:

    Click the link for the Dell 964 printer drivers. Select operating system (OS) Vista. Once the operating system is selected as Vista, you will see an added option to run a cleaning/Patch Wizard to remove the old Dell printer software. Run the hotfix and restart the system. Make sure that the USB cable is not connected to the computer when uninstalling the printer drivers.

    For installation of printer drivers Dell 964:http://dell.to/13u7fzp

    When the system has restarted, check printing software has been removed and then install the drivers for the same link mentioned above. This time, select the operating system such as Windows XP, which is the operating system on your computer before you download and install the drivers.

    Hope this solves the problem for you. Let us know if additional assistance is needed.

    Thank you and best regards,
    Babita S
    #iworkforDell

    For easy access to the drivers, manuals and updates, please visit our Support Site .

  • Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

    I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

    Dell is not win7 driver/software for this model, later are for 32-bit vista

  • Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

    Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

    Hi LouiseFarmer,

    It seems there is a problem in the basic WIFI the printer setting.

    I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

    http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

  • Wireless printer Dell V515w All In One Printer - owners (RED) wire

    Please follow the instructions below and then tell me what happens.

    First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

    I recommend that you use these recommended wireless router settings to get the best communication between the printer and all the computers.

    Unplug the printer.

    Uninstall the printer.

    If you use Windows 7 also try... Driver Manual printer removal

    Restart your computer.

    Download the correct drivers.

    XP/Vista/Windows 7 32 bit drivers

    Drivers 64-bit of Windows XP/Vista/7/8

    Other drivers

    Install the appropriate drivers. You will be asked when connect you your printer (power on). Please make sure that your computer is connected when you install the drivers.

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    If you use Windows 7, use the Vista drivers in compatibility mode.

    Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change the Vista SP2 compatibility. Then right-click on the drivers, on the left, click on run as administrator and follow the instructions on the screen. You will be asked when connect (printer)

    To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

    In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

    Scanning

    Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

    Scan wireless, use the buttons to scan on the printer.

    Rick

    How to install Dell v515W on a Mac

    I tried this on my purchased v515W recently, but I guess that it also works with the v515 and other Dell all-in-one printers. I recently bought the v515W for my wife who is a user of Mac, only to find out that Dell has no Mac drivers for it. Somewhere on the Dell site, they have a typo at some point that the Mac drivers are available for the printer. I used my Windows machine to install the printer. After much trial and error, I finally managed to get the printer to work from a Mac wireless.

    1. Configure the printer from a Windows machine
    2. Open System Preferences-> Print & Fax
    3. Click the + to add a printer
    4. Hello will now detect the v515W by the name of the printer
    5. Mac will complain that he could not find the printer driver
    6. Manually select the print driver for 'Lexmark S300 S400 Series' in the search box where you can select the printer

    That's all it took to set up. Hope this helps,

    See you soon,.

    Raj.

  • 944 Dell Photo all-in-One printer problem

    The message of the "paper jam" bed printer, but there is no paper stuck.  Instead, when I press the "check" button as indicated, the printer stops briefly, and when he goes back, the ink cartridge holder snaps back, making a big noise.  This product whenever I press the button "check".  The fact to unplug everthing has not helped either.  Any suggesetions?

    micaro,

    It sounds like the encoder Strip came off the coast. Read the second thread to...

    Cleaning the MICR band (loud bang of the carriage of the printer)

    Rick

  • Impossible to install Win 7 driver for Photo all-in-One Printer 926

    Hello, have a problem, my dell while a will 926 photo printer not print since switching to windows7, it was changed by an expert scientist, when I had problems with my laptop! Since I had to pay him, I don't want to pay again with this problem, knows Server2008 insirion 1501, there is a problem with the printer, it will scan but not print, thank you, Jo x

    Hi Taskers,

    This forum is for questions of funds. If you don't mind, I will pass your message on the forums of the printer for assistance.

    Also, I hope you don't mind that I changed the topic to make it easier for people to understand the nature of your problem.

  • Canon Pixma MP610 Photo all-in-One Printer

    I just upgraded computer and operating system from XP to Windows 7, and while the printer works fine, I can scan is no longer. The scanner starts scanning but then he suddenly stops and I get an error message saying that it cannot communicate with the scanner (Code: 2,155,0).

    I have updated the driver from the canon website:

    Details - MP610 series MP Driver Ver 1.01 (Windows 7 x 64 x 64/Vista64/XP)

    Hi Gary,.

    I suggest you follow the suggestion mentioned in the article:

    http://support-SG.Canon-Asia.com/contents/SG/en/8100065300.html

    I hope that the above information is useful!

  • Reference Dell all-in-one printer 922-is not recognized in windows 8

    Dell all in one 922 printer works is not in windows 8

    Hi Linda,.

    You can visit the link next to the Windows Compatibility Center that describes the Dell 922 Photo all-in - one Printer is not compatible with the Windows 8 operating system:

    http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Dell%2Ball%2Bin%2Bone%2Bprinter%2B922&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

    However, you can try to install the printer in Windows 2000 or Windows XP compatibility mode and check if this solves the problem.

    Reference Dell Photo All - In - One Printer 922, v.G21, A04

    http://www.Dell.com/support/drivers/us/en/04/driverdetails?DriverID=R102523

    To install printer drivers in Windows 2000 or Windows XP compatibility mode,

    a. right-click the installation file, and select Properties.

    b. click on the compatibility tab.

    c. in compatibility mode, check the run this program in compatibility mode for: option.

    d. Select available options under Windows 2000 or Windows XP .

    e. click apply and OK.

    See the link below for more information about compatibility mode:

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Dell Photo All in One 964 - 10-64 bit Windows compatibility

    Hello

    I just bought a new Dell laptop and updated to Windows 10.
    Unfortunally, my OS is unable to recognize the driver for my old printer Dell Photo All in One 964.
    I have read all the post on compatible with this specific printer driver. I tested the procedure:

    -remove the printer

    -install the driver Windows Vista - 32 bit or 64 bit and put Vista SP2 compatibility mode (also compatibility mode with Windows 7 and windows 8)

    -Connect the usb printer. But only the Scan is installed successfully.

    any help will be really nice!

    Thank you very much

    / Reg

    I installed the driver R146813 and it worked very well, for scanning and printing.

    Sure to first temporarily disable your anti-virus firewall before running the Setup.exe that comes with this driver. Complete the configuration all the way, including the print test page. Turn the firewall again later.

    The R146813 driver can be downloaded from www.dell.com/.../DriversDetails

  • 7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs

    Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?

    Hi @ohchango,

    Welcome to the Forums of HP Support!

    I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

    Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.

    NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.

    In order to help you, I'll need more information.
    What operating system do you use?
    Mac OS X: How to find which Mac OS X Version is on my computer?
    Windows: How to find the Windows Edition and the Version on your computer.

    If you need assistance, please let me know the instructions above. I look forward to hear from you.

Maybe you are looking for

  • Update of the SSD in Macbook Pro mid 2014?

    I would like to upgrade my SSD (currently 512GB) something big in my Macbook Pro retina mid-2014. I did some research and got a little confused. Of after iFixit, it should be possible. But I am at a loss exactly what type and brand of SSD, I need to

  • Windows Update lost his place when internet is reconnected

    I would like to know why this happens, because my selected updates are unchecked.

  • Check the peripheral post OfficeJet 6700

    When I insert original in Lac for the fax on my OfficeJet 6700 maintenance cycle "Peripheral audit."... ' begins and does not stop. I can still print from my PC and receive faxes but cannot send faxes.

  • ACER ASPIRE 471 - E1: UPDATE THE BIOS CRASH

    HELLO, I NEED HELP ON THIS. I WAS updating THE BIOS ACER ASPIRE E1 - 471 VERSION 2.11 to 2.18 BUT GOT IN FAILURE, WITHOUT NORMAL MORE to IGNITE. WHEN UPDATING THE FILE ORIGINAL WITH THE HELP OF THE ACER SUPPORT WEB SITE, RESTART THE LAPTOP TO WINDOWS

  • Tree control: how to change an element

    I know how to create a tree. It's very pretty. The next natural step is to edit something: For this example, let's say I have a level superior element called 'Rob' and he has two children "Nora" and "Caleb". The names are the values of the "chain of