refresh a-please help

Similar Questions

• Slide show auto refresh? PLEASE HELP, NECESSARY FOR THE EVENT!

  I want to download images in a folder on my network server and have them come on the other cpu screen savers without having to hit refresh in mode slideshow screen saver. or y at - it a program that will allow me to do this? and who? How? etc.

  You must share the folder of photos with write permissions so that you can copy files to it.
  http://support.Microsoft.com/kb/304040

  What about encouraging them to display on the screen saver, I don't think this is possible without him back on – you can certainly test it to see if it works for sure. If it doesn't work, you can find a different screen saver.

• Vista does not refresh please help to update the Windows Update

  Vista will not install updates (V4BizSP2) Please help Hello! Please help if you can. We have a bit of Lenovo (ex - IBM) laptop under Vista Business SP2. While it has allowed a small number of updates, especially when run us Windows Update through the effort for a while and then said: we need to update Windows Update (himself). We click so to do. Then after some time it returns to the initial screen (when you click to perform a Windows update). Thus, we believe that everything is fine and that Windows Update is udated (himself), and ready to go (do its work). SO we click on it and... voila... the cycle repeats..... She tells us eventually need update Windows Update (alone, once again). To check (with history of installation), which has been updated, usually nothing. The latest updates that automatically enrolled as successful were then more: last week and since then were not successful however. Told us to download and install the update to windows directly from the microsoft Web site. We did the download, he said that he filled very well. He asked if we wanted to install. We clicked on Yes. He worked on it for a while and then says installation failed. ?????????????????????? We have Vista Business Service Pack 2, and Norton 360, and it's a 32-bit machine. Any help is very appreciated, especially if it is super easy for computer-illiterate. Thank you very much!

  Hello

  Could you please answer these money questions?

  one) when are you facing this problem?
  (b) do you get errors when updates fail?
   
  You can open the site Microsoft.com/downloads link and download the updates manually and then install it. If the installation fails, then try the following methods.
   
  Method 1
   
  Reset windows update components and then try to install the updates and see if the installation is complete. Open the link below and click on the cue, he touches.

  http://support.Microsoft.com/kb/971058
   
  If this is not enough, you try the next method.
   
  Method 2
  Try to download and install the updates manually. Visit the link and enter the KB number
  for updates and download the same.

  http://www.Microsoft.com/downloads/en/default.aspx

  All the steps suggested to try the link below.

  http://support.Microsoft.com/kb/822798
   
  Try these steps and let us know the answer.

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Keyboard problem Z70-80, please help

  I've had this laptop for months and it started just today. Basically, most of the keys work fine, but a few essential buttons are screwing. Just web browsing, for example space refreshes the current page and the right arrow key opens the search v + b, m and n will also tap the other pressed individually character (by pressing the results either v or b in "vb", even with m and n).

  I use this machine every day and really need the built-in keyboard to work properly, please help me out here .

  As you confirmed with two different operating systems. Its most likely material. I doubt a bios field that would affect it and it might migrate to external keyboard as well.

• I had a "Blue screen" problem, please help me!

  Well, I don't really know the source but it happened several times already, here are the details of the error:

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini091109 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8A90628F
  BCP3: 9CCAEDB0
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: 7ec0ad43-82ec-418c-af58-c7d4e1d1d9e8

  copied and pasted this information of view problem history in Control Panel and it was the biggest mistake, what happened is that the PC I use suddenly gets a blue screen with big writings saying something like she stops by unexpected error. After rebooting, it says "Windows has recovered from unexpected shutdown" and gives me a chance to see solutions on the net, but the work does'nt. Fortunately, I don't have an error for hours, but I'm afraid it may happen again. Please help me.

  My laptop has:
  AMD Athlon processor
  1 GB of RAM
  1.60 Ghz
  ATI Radeon X 1250
  Windows Vista
  120 GB hard drive (33 GB free now)

  I think that the mistake occurred whenever I might have too many applications open, especially in the section of the status bar, that I can't do it, please help me!
  Thank you.

  Hello

  Think the drivers - do all.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• WRT150N questions, Please help!

  So I just moved into my new House and set up my internet. I used my router before without any problem so far. So my problem is that I have this linksys router and a motorola 2210 dsl modem AT & T Eh well, if I run the Ethernet directly from the modem to the computer internet works fine. But once I added the router I can not get a connection. With the connected router, I have all green in all areas on the modem and the router "I should be connected by saying" my wireless devices are showing my hense network I should be able to connect to it. But it always says connection failed... At one point, I even had my office that I was connected to 54 Mbps but still my home page would not load. I have no idea whats wrong. The internet is coming through, my wirelss peripheral are picking up that I have a network but I can not connect unless I'm jacked right at the source. Please help me understand this. (and Yes, everything is pluged in the right way)

  AT & T usually configures their Motorola 2210 to the PPPoE connection for you and use the 192.168.1.x subnet.   With its default settings, your WRT150N also tries to use the 192.168.1.x subnet.  But you can't put the same subnet on the Internet (WAN) and the ports LAN of the WRT150N.  It will be, or does not work at all it will not work properly.

  To fix the problem do the following:

  (1) put your entire network.

  (2) disconnect all other devices WRT150N.

  (3) use of an ethernet cable, the son a computer to one of the four ports LAN on the WRT150N.

  (4) turn on the WRT150N and your computer.

  (5) connect to WRT150N to 192.168.1.1

  (6) in the WRT150N, replace the "local IP address" 192.168.2.1

  7) click the 'Save Settings' button and then wait for the screen refresh (3 to 60 seconds).  You will be probably disconnected from the WRT150N.  Don't worry about this.

  Exit 8) your browser and put your entire network

  (9) with an ethernet cable, connect the ethernet port on the Motorola 2210 to the Internet of the WRT150N port.  Leave your computer connected to a LAN of the WRT150N port.

  (10) power of your network.  It should work.

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD player as uninstalled itself and fixed showing sound there please help me!

  Hey, please tell me how I can fix my TSSTcorp CDDVDW TS - L633A ATA Device it shows in Device Manager and it says its been changed, I even tried to roll back the version and almost everything tried and still, it opens and closes but it does not appear in my computer or will not read a disc and it won't let me download a better cause it says there the last version installed so idk what to do I give up so please help...

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Hi people I have some hard drive problems, please help :)

  Hi guys, I just bought a Sata HDD internal 2 TB, but I do not see it in 'my computer', but when I go to computer management I see, I tried to do something with it, but an error pops up, I treid deleting and creating a new partition, but just before the end, I get this error : "The operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  If the problem persists close the disk management console, then restart disk management or restart the computer. "Please help. TNX

  Did you try to restart and try again as he proposed?  Assuming that you I had two ideas.  First of all, if your system is not aware of Windows updates, I would now.  Secondly, I have had good success called Easeus Partition Master that you can download from http://easeus.com .  I see they have a page for a free version 9.1 for users running the environments of 32 and 64 bit to http://www.partition-tool.com/personal.htm .

  I hope this helps.  Good luck.

• Completely locked on my windows laptop 8 Please help!

  The title says it all. I'm completely locked my computer when I turn on my computer, it says set password. the user name says my email address, but I know as my e-mail password and I put it correctly, I even connect to my hotmail and the password is correct, I even changed now and again I try typing on my computer locked windows 8 and keep saying wrong password! Don't show me same clue or tells me to reset the password. I do not have another user, I can move to or whatever it is, I don't know what can I do? When I try to go into safe mode it tells me to put the password for homegroupuser$ which I guess is another domain administrator account and I never put a password on it on this user. I continue to support on enter without anything typed on the password and it keep telling me wrong password and I have tryd a few different password that I would always use and they are not the right one! I am the owner of this computer. I can't use a cd or a flash drive to restart my computer because whenever I click on them in the advanced opioins sound always take me to the login screen. I can't go to cmd or mode without failure or system restore, I'm completely locked I don't know what to do, ugh it would never happen on my Windows 7 laptop can anyone please help me with this problem!
  I am really frustrated with this problem! Not happy with this problem of window 8.

  JL

  You can do a refresh (or factory reset) of the start screen.  Check with the manual of your computer (or Google it) for more information.

• I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  I have a lg 4 k tv (40 "40UH630V TV LG ULTRA HD 4 K) with HDMI 2. 0 and if I buy apple tv 4 can be used with HDMI 2. 0 port or do I HDMI 3 port to use this? Please help me

  You can use it with your TV.

• I am tryng to buying music on itunes, but it says security code wrong please help

  Hello

  I have problems I want tp purchase music on my itunes bt ts always requires the security code that I don't have it please help

  Check your card information. If they are correct, try to change or remove your Apple ID - Apple Support payment information

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• My hard drive will not be displayed in the Finder, please help!

  I tried several options to try to solve my problem, but it is not good. I have an external hard drive Seagate 2 to. I used it for about 6 months, but one day it just does not appear in the Finder more. I checked in disk utility and it shows up there, but it is labeled as "Uninitialized 2 TB Windows NT specifien". It seems strange, that it now says Windows when I used it fine on my Mac in the past. It won't let me hit mount either. Please help me.

  Thank you.

  Did you have the Seagate utilities or any installed third-party NTFS software? The drive has never been formatted to support OS X?

  Connect the external drive and OS X Terminal, after the release of

  diskutil list