Refresh all labview calls in a sequence file after change of VI

Similar Questions

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• The list of all the steps in a sequence file

  Hi guys,.

  I'm new on the forum of NI Teststand, so this my first topic here. The situation is the following:

  Currently I develop a LV operator interface and I need to have a list of all the test step in a sequence file.

  I am able to list all the steps of a sequence, but in the file of the entire sequence.

  Are there opportunities to do?

  Thanks in advance!

  Hi Maroci,

  first of all, I am also quite new to TestStand, but I still think I can help you a bit.

  Given that your code works for a sequence in the file simply browse all the sequences in the SequenceFile. Consider something like this:

  This help you?
  Edit: Don forgt not (like me) to close the SequenceFile reference!

• I can't save my PDF files. When I hit Save as an empty window appears instead of a menu of files or folders Windows Explorer view. I'm a Publisher and save files under new names of files after changing them. Why can't I just save these files in Adobe DC (

  I run Acrobat Professional so that I can change/brand place/comment in the PDF files. At one point recently I noticed "Acrobat Reader DC" in the name of the file at the top of the page. I do not have ask this or do anything to get there that I was aware of this. I adjusted for the new look of the screen and edited several files without incident. But yesterday, I opened a large file which had been addressed to me in Dropbox. When I downloaded and opened it and tried to change it, the selection tool was not aligned properly, so the selected areas were elsewhere on the page, where the cursor was. I restarted my computer and was able to change the file more or less normally (I noticed more little glitches with this CD player but I can live with them). But when tried to save the file with a new file name, like I always do to differentiate files that changed since the original files, the save window is empty. There is no option to save the file with a new file name. In fact. There is no option to save the file with the changes! I thought maybe it was a problem with this file only, but when I tried to edit a file provided by regular e-mail, I met the same problem trying to save to a new file name. What is the relationship between my old Acrobat Professional and Acrobat Reader DC? Why can't save files normally? I managed to save the changes I did by saving it in the cloud to Adobe (I had to then because I could not send the file by e-mail because of its size - I tried to send it to me)., but I'd rather widely navigate in Windows Explorer to work with files. I suspect that there is some simple aspects about what I am simply absent or do not know. Can anyone help?

  Hi Nathalie,.

  Please take a look at this thread and let us know if we get to the brand:

  "Save as" box pop up does not allow me to save the document.

  Best,

  Sara

• Could not load the .zip file after changing CSS

  
  We are working on a native android application with DPS.
  
  We would like to use some custom CSS to change the banner at the top of the façade of the library/store. Our developer takes the work .zip file, open, change the CSS, re-archiving it and then back to send it to me. When I try to create the application by using the new .zip file, the app crashes.
  
  We went through a series of changes CSS, thinking it was the CSS that was the problem before to sit and try a different set of tests.
  
  The first thing we tried was taking labour zip file, unzip, without making any changes, and then re - zipping it and make the app again. It breaks the app.
  
  Leave us this kind of tests and tried a more.
  
  Two files were created; We have the file structure:
  
  Zip archive
  -Default_android_library
  -folder fonts
  -images folder
  -index.html
  file - js
  -libs folder
  -main.js
  -style.css
  -file templates
  
  And the other is just:
  
  Zip archive
  -folder fonts
  -images folder
  -index.html
  file - js
  -libs folder
  -main.js
  -style.css
  -file templates
  
  None of these worked, either.
  
  Everyone knows that kind of problem before with the edit and re - compress them for android?
  
  Thank you.
  

  Neil,

  I think that we thought about it, we add an extra layer to the file structure in zip archive.

  Thank you

  Christopher Huber

• Impossible to find all the VM files after changing the esxi4 HDD esxi5

  Hi all

  I have a problem and you need help someone here.  I have an esxi4 with some VM guest OS inside and works without problem, after I detach the esxi4 host harddrive to a new host esxi5.  I can't not find any data file or vmdk in esxi5 under my vSphere client hosting.  Then I checked the disk space has been used but no file inside?  Same result even I update the vmfs3 to vmfs5 data store.  What's wrong???

  Help, please

  NG Man

  Welcome to the community,

  Please provide more details.

  • do you see the disc moved under Configuration-> storage-> vmhbaXX adapters?
  • the datatsore dies it see the place in the Configuration-> storage?
  • make data stores (old and new) have different names - the same name could cause problems!
  • you see any folder or files when you 'old' data store using the browser to store data of pen?

  Same result even I update the data vmfs3 to vmfs5 store

  If there are any questions, it is not a good idea to make major changes without knowing the cause of the problem!

  André

• Cannot open the .jar files after changing default programs

  Original title: my .jar files open with CMD!

  I tried to change the default program that opens towards the java.exe and even change all .jar for java files, but now each .jar I opens with CMD and run it, I right click and click Open with Java and it is very annoying. I tried right click and press choose program by default and chaning to java, but nothing seems to happen! I don't know what to some may help me!

  Hello

  -Have there been any changes made on the computer before the show?

  -Is the file type-specific question?

  I would suggest trying the following steps and check.

   

  Method 1:

  Try to replace the association command prompt.

  a. Click Start and type cmd.exe in the start search box.

  b. right-click on cmd.exe and select run as administrator.

  (c) in the command prompt, type the following commands, and press ENTER.

  To remove the associated association: assoc.jar =

  To assign/change a file association: assoc.jar = jarfile

  d. close the command prompt and check with the question.

   

  If the problem persists, then uninstall and reinstall Java and check.

   

  Method 2:

  How to uninstall Java on my Windows computer? http://www.Java.com/en/download/help/uninstall_java.XML

  How can I manually download and install Java for my Windows computer? http://Java.com/en/download/help/windows_manual_download.XML

  Let us know the results.

• Missing files after changing computer with Adobe first Elements 9

  Hello

  I recently changed my computer, and I installed Adobe first Elements 9, I had on my old computer. I actually changed my computer hoping that it would be better, because she was always crashing on my old computer. I tested it, I created a new project and everything went very well. But of course, I also want to continue my old editing projects. The problem is that, even if my library is organized as with my old computer, Adobe Premiere is not able to associate the files in my projects at their source. If each of my files (sounds, videos, music, effects) are not recognized, and I need to restore one by one by clicking on them and the research in my library. Now, I quickly realized that I could not go that way, because I'm editing of thousands of files.

  But I have trouble believing that there is no way first can recognize files by itself, like iTunes can do when the music is missing. I mean, first knows exactly how the missing files are supposed to be, then why couldn't he find them? Does this mean that if my computer was broken, I could not able to change my old projects on a new? This makes no sense.

  Thanks in advance,

  MrJoshameeGibbs

  MrJoshameeGibbs

  Thanks for the reply.

  To check the version... Please open Premiere Elements in his chronology workspace. Go to Menu Help / about Premiere Elements. The top of the screen that opens should include a version 9.0.1 if you have downloaded and installed version 9.0.1 and work from it.

  Please consider the following strategy and see if it solves the problem... just do it for a project as a series of tests...

  1. back to the computer 1, open your project and determine that it opens with the media source associated with the project.

  2 create a folder "copied" using File Menu/project Archiver and its choice of copy a project.

  3 transfer the folder "copied" 2 hard drive... maybe with USB Flash drive.

  4. Ouvrezledossier "copied" on computer 2, find the project file (PREL), right click, select open with, and then Adobe Premiere elements 9.0.

  The project opens in the Adobe Premiere elements 9.0 on the computer 2 with all its current source media?

  RTA

• Cloned VM will not match its files after changing the name, svmotion

  Recently, I've cloned a VM, lets say "server1" "clone server 1.  Once the original virtual machine has been removed, the full name of "server1 clone" has been renamed to "Server1."

  OK, generally, to match the files of the virtual machine to its full name, I have storage vmotion virtual machine data to another store.  (Directions: http://kb.vmware.com/kb/1029513)

  Well, that didn't work.  All the files still say 'server1 clone' hard, .vmx, etc etc.

  Running vSphere Enterprise Plus 5.  Is my only way to 'fix', that is to use the console?  Eeek...

  Furthermore, the virtual machine in question is our vCenter server.

  Thank you.

  Known issue: http://kb.vmware.com/kb/2008877

  / Rubeck

• How to edit and save a file (after change in CS6 in LR) to hold it in collection LR where it was?

  I understood that I could choose a file from a collection of LR, start editing in LR and then pass it to the CS6 (I chose the option to make a copy and keep your changes to the LR), modifies the CS6 and save CS6 (saved as a PSD file). Subsequently, I see the 2 files (one being the original file, the other the PSD file saved in CS6 in the original file folder, which is good) but the file seems to have disappeared from the LR collection. I'm new to LR.

  When you change in CS6, you do a 'Save' or ' save under... ". » ? You need to do a backup and not a "save under...". "You cannot change the file type from what it was when Lightroom created the file.

  Works for me when I do it like that.

• Is it possible to keep the same arrangement file after changes PS?

  After editing a file of LR in PSCS3 (and then save and close), when this file returns to LR, this is a psd. file & changes his place until the end of the catalogue as well as the original file of the NAVE and is the file that is selected. This is annoying as I have while you open the Panel background film and back the cursor to the position where the photo I just edited was originally to go to the next photo (instead of simply by pressing the arrow button to the right). It is a waste of time. Is it possible to have the original file of the nave as well as the return to its place of origin in the psd file catalog. I am aware that I can probably rearrange the files later, but it does not solve the problem of workflow.

  Tim Dalton wrote:

  That is the Question. Is it possible to have this original Photo 1 (with psd) to be in the place where Photo 1 is supposed to be, at the beginning of the catalogue & not at the end.

  The recorded image and the original may not move normally at the end of the film. Check that the sort order is not the ordervalue.

• Sequence file unload the runtime starts and remains in memory through executions reference

  Hello!

  I am facing a problem using a dynamic movie file loading.

  Here's how my request: I'm testing the products on two sockets of different test so I use (a measure) parallel processModel.

  When lauching a test on one or another location of test, I still have the same trial customer template (MyProcessModelClient) in which I wrote a PreUUT call as usual. In this PreUUT custom, I get the serial number of a product, and according to this number I am a sequence of test script file and saving it (TestSequence_1.seq if it's on the test Socket 1) and TestSequence_2.seq if it is on the other.

  Then, in the MainSequence of 'MyProcessModelClient', I have a single sequence call TestSequence_1/2.seq dynamically according to the socket (TestSocket.MyIndex + 1). This calling sequence is then defined with:

  • option to load: dynamically load
  • unloading option: unload after executing the step

  And here's the trouble!

  First, the code stored in my "SequenceFileUnload" of TestSequence_x sequence reminder runs when the file is loaded... (I guess this one is loaded, copied in memory and unloaded right after...)

  Then what PreUUT reading for the next product on the same sockets of test generates an error in my script code tries to save the new file TestSequence_x (error-17206: '... a file of sequence with this path is already loaded "")!

  No idea why he acts like that?

  I don't know why you see the behavior that you describe and I'm unable to reproduce with a simple example (that I have attached). A few comments/suggestions:

  1. Make sure that you call Engine.ReleaseSequenceFileEx after that you create and save the movie file in PreUUT.
  2. The unloading of movie file callback will be called when you release the sequence file after you save it in the PreUUT because you release the last reference to this file in sequence.
  3. Make sure that you set the OptimizeNonReentrantCalls false on the sequence that you call in the TestSequence_x.seq.

  -Erik

• Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after ProPhoto color space

  Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after changing color ProPhoto RGB space. Then, I opened a picture at once and changed the settings of Photoshop CC ProPhoto RGB color (under the workspace). When I was editing on photoshop, I tried to export the image, but the colors seemed different, a bit washed out and blue, from the color of the workspace, I was on. I don't know how to solve this problem. Please notify.

  Thank you very much for this! Color sorted

• I can do something that would cause all the new sequence files to have the same local variables?

  I would like to add local or drop some variables global to all the new sequence files I create. I was hoping that I could simply add the variable to the process template and make it appear whenever I created a new sequence or in any order who have used this process model, but it doesn't seem to work.

  Does anyone know a way to do what I'm doing?

  Thank you.

  Skeptic,

  If you use TestStand 4.0 and later versions, you can create a sequence model by adding a sequence selected in the models pane of the TestStand sequence editor.  You can then use this template to create all your future movies.  Once you configure the model you like you will be easy to reuse this sequence skeleton again.

• Get a context of a file of sequence another sequence file

  Hello

  My goal is to create my own property loader. I have successfully created a LabVIEW VI wich ables me to select a category of variables (local variables, parameters, fileglobals, stationglobals) with the expression editing control, and he created an INI file with all my variable names and values.

  OK, now I wanted to created a custom tool of it. So when I create a new sequence Teststand, I can select tool-> LoadMyVariables and creates a current of my movie file INI file (let's call it the WORK SEQUENCE FILE).

  To create this tool, I put my LabVIEW VI in another Teststand sequence file (let's call it the FILE TOOL of SEQUENCE). what I call in my custom tool.

  The problem is that my LabVIEW VI "ThisContext" (the sequence context) need input and when I use my my WORK SEQUENCE FILE tool: it runs the TOOL SEQUENCE FILE and I can not access the my WORK SEQUENCE FILE ThisContext more.

  My question is: Y at - it a way to send "ThisContext" from a sequence in a sequencefile to a sequence in another sequence file? (using the custom tool Teststand)

  To help people in the situation, has the solution:
  -> To find the sequence in which it is called the tool, use the search string: "RunState.InitialSelection.SelectedSequence [0].

  -> In the words of change in this case, connect to its properties: the frame AND the engine!

  See the image as an attachment.