Get a context of a file of sequence another sequence file

Similar Questions

• Get the context of the sequence of other connectors (active) in the batch processing model

  TestStand 2014 - model updated the batch

  LV2014

  System controls an environmental Chamber and doing trials on 4 of the UUT.  Room Enviromental is the shared resource and is controlled by the synchronization of thread only lot.  A UI TempMonitor of Labview (also synchronized lot) pops up, until you reach the target temperature and soaking time is over (so you can monitor returns to the House and see the amount of time remaining.  It all works fine in the system of warnings in.

  Now, there is a new requirement to take permanently UUT s to ensure that they remain in the State during the temperature ramp and soak period.  The simple answer is to integrate this track in TempMonitor UI because it has access to all relevant data pads.  However, I would need to do an end run around traditional return since it is only run by one of the four (up to).

  My thought is that if I had access to all active sockets sequence contexts, I could ask them their index and State, follow up and write the results to réécrirait a local variable before leaving the user interface.  The only thing that prevents me from going forward, it's that I don't know how to get the engine to give me the sequence for each Active socket contexts (0-3 which may be disabled via the setting ContinueTesting false instead of disable flag, it is a product of use pass 3rd batch of party model, so the executions of people with disabilities are marked as completed when running rather than wait).

  Or, Alternatively, how inspect all executions and to determine what decision he belongs (if necessary, because my data acquisition engine runs in its own, hidden, execution).

  Thanks for any help,

  Mike Webster

  Actually, I was looking for a way to get the SequenceContext for the other active sockets that launched the TempMonitor GUI, so I could put results in the other sockets directly.

  However, I gave it, and instead I am launch the GUI TempMonitor in its own thread and have each socket to monitor the status of USE on its own with a separate VI until what the ramp / soak temperature is how the GUI will highlight Boolean StationGlobal that triggers the individual to continue.  More complicated, but also in the spirit of TestStand to things, I think.

  MKE

• context menu of files lists apps twice

  In some cases I don't want to use the application allocated to a type of files. E. g. opening a PDF with adobe reader, but adobe acrobat professional.

  To do this, I place a right-click for the shortcut menu; Then, I select the application you want in the list.

  But each app is listed twice for several weeks. I have no glue, what to do. And since I realized this, it happened by chance that I have to wait s until you get the context menu.

  I don't know, but it is possible that this strange behavior is presented after the last update of El Capitan. This update caused a system blocked; I could not connect as a user more. I solved this problem blocked by resettlement El Capitan.

  My system: MacBook Pro 13', El Capitan, 1Toctet HARD drive at the end of 2011.

  Same behavior after reinstall El Capitan.

  Same behavior using SSD 1 TB (Samsung 850 Evo, CCC-clone)

  Same behavior from Mo via external HDD or SSD (CCC-clones, attached via USB).

  Any idea to solve this problem of double apps listed in the context menu?

  Thanks in advance!

  Lit-Serv

  Boot mode safe.

  http://support.Apple.com/kb/PH11212

• get the Inputstream of the file jasper from a specific path

  Hello

  I use jdev 11.1.1.7.0

  I need to get the InputStream of the file jasper in my application to view the report in PDF format. I do this by following codes:

  
  ServletContext context = getContext();
  InputStream inputstream = context.getResourceAsStream(repPath); //  repPath = "reports/reportName.jasper"
  
  
  
  

  whereas the repPath is the folder that exist in the current application (ViewController\public_html\reports\reportName.jasper)

  but I want to put all in a specific folder as "d:\reports" and all reports call for applications of this path.

  but when I put repPath = "d://reports//reportName.jasper", the variable in the code below inputstream is null

  
  InputStream inputstream = context.getResourceAsStream(repPath); //  repPath = "d://reports/reportName.jasper"
  
  
  
  

  I need to have a specific for all reports path, because some reports can be called from many applications, can someone help me?

  Habib

  Concerning

  getResourceAsStream() return resources compared to the current ClassLoader.

  You can use something like:

  inputstream = new FileInputStream(repPath);
  

  Dario

• A Bug in Get Photos and videos of files and folders in PSE 8

  Today, I shot a few pictures with my digital camera, then used the Canon software to load to my computer that is running Windows 7 x 64.  The Canon software created a folder named 2010_05_31 in the C:\CanonPowerShot directory and downloaded files. Explorer Windows see the folders and files.

  I started PSE8, has chosen to organize, then a Ctrl-Shift-G to catalog the new images. Organizer is in the thumbnail view. I've navigated to C:\CanonPowerShot and scrolls to the bottom of the window to find the 2010_05_31 folder. Oops, the list ends at 2010_05_13, the last folder I was cataloged in the Organizer.

  I cancelled the import and switched organizer at the sight of folder location. Since I had already catalogued records of C:\CanonPhowerShot, all files have been listed in the left pane - including the new folder 2010_05_31. I have a right-click on the 2010_05_31 folder icon and selected import feature. The files have been imported correctly.

  I went back to the display of the thumbnail, once again clicked on Ctrl-Shift-G and navigated to the directory C:\CanonPowerShot. Once more the list of files ended with the 2010_05_13 file. This time, I looked through the list of 75 records and found the second 2010_05_31 file from above, as indicated between the 2004_09_30 and 2004_10_01 folders.  In other words, it is out of sequence of collation.

  To summarize: when you try to add pictures using the Get Photos and videos from files and folders, the window to select files is not in the proper sequence of ranking. The files are in the right sequence of classification in Windows Explorer. The files are in the sequence of classification appropriate in the left pane in the location of the Organizer folder view - before and after importation. The only non alphanumeric character in file names is the underscore character (_); There is no periods (.).

  Since the folder is listed in the correct classification sequence in both Windows Explorer and in the left panel of the display location of the Organizer folder, I doubt that there is not displayable character in the name.

  Also has anyone seen this problem?  How we report these bugs to Adobe, or should I even bother?

  I wonder if the Browse dialog box has somehow decided to sort by other criteria.  Refer to the screenshot below and try the following steps:

  1. in the file > get Photos and videos > window of files and folders, click the View Menu (1).

  2. Select Details (2).

  3. click on the column name to sort by name - clicking again changes the order increasing, decreasing and vice versa.

  4 try clicking on some of the other columns to sort by them.

  

  Different versions of windows supposedly remember the last settings for a folder, but I can't ever understand their 'smart' rules to achieve this. Every time I open a file in a standard Browse dialog box or in Windows Explorer, it is often appears in view of evil with the incorrect sort order.

• How to get rid of. Ds_Store file. Help, please!

  My MacBook Air cannot get rid of. Ds_Store file in my desktop screen, although I deleted it several times. I think this is related to the virus or malware. Please help me solve the problem.

  Thank you.

  There is an invisible ds_store file in every folder on your Mac, desktop is just a folder like the rest. Sometimes the invisible can be toggled off. You can fix this by launching the Terminal from the Utilities folder, and then copy / paste this command at the prompt:

  write QLEnableXRayFolders AppleShowAllFiles False & & killall Finder

  Press return
  

• Click on the link-get "Windows cannot open the file" select a program?

  After clicking on link get "Windows cannot open this file" have to manually "selecta program programs installed" Firefox appears as a choice and I double-click. How can I solve this problem / eliminate these extra steps
  ? Thank you Joe
  I am running Windows XP, MS office Outlook 2007

  Is it a link in an e-mail message in Outlook? This problem arises from time to time.

  While Firefox can usually set himself as the proper application to open the URL, you click in other programs, settings are sometimes blur or do not take. This article has tips to solve this problem: setting Firefox as the default browser does not work - what to do. Anything there help?

  If the problem persists, is there something special about how you start Firefox? For example, you have this launch in a security 'sandbox' or virtual machine? You have all the command-line options set to allow several simultaneous sessions of Firefox, or call the Profile Manager? If none of this sounds familiar to you, the answer is probably not.

• When I click on an RSS feed, I get this message. XML file does not appear to be any information of style associated with it... It works very well with Internet explore

  When I click on an RSS feed, I get this message. XML file does not appear to have any information of style associated with it. The same RSS feed works fine with internet explorer, any information would be helpful.
  Here are the first 3 lines from what I get

  < rss version = "2.0" >
  < String >
  < title >

  You open a new empty tab?

  Don't you see the text 'Click on the RSS buttonin the toolbar of navigation on this page?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

  I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

  What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
  e '.

  example of extractedb.txt information:

  [email protected]

  [email protected]

  [email protected]

  * has a random number of emails as well *.

  I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

  Any help would be great = D

  Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

  game of mf to ((path to the folder as text) & "mail_list.txt")

  the value mf_List to {}

  the value sel_addr to {}

  the value mf_List to paragraphs of (read file mf)

  the value sel_addr to (choose from the list mf_List with title ¬

  ('Mail list' with multiple selections allowed without empty selection allowed)

  If sel_addr is equal to false then

  Error number-128

  return

  end if

  If length of sel_addr is equal to 1 then

  sel_addr display dialog box as text

  on the other

  the value Point to the text of TID to AppleScript delimiters

  the value Point text in AppleScript return delimiters

  display the dialog box elements of sel_addr in the text

  the value Text of point AppleScript delimiters to TID

  end if

  return

• How to get the .rbf and .through files?

  Hello I am currently working on the project, which provides for automatic deployment and launch programs everchanging.

  Ev3 are scattered in different schools. I wrote a simple script that can download a file and then send it to ev3 via wifi.

  But I'm currently stuck on how to get .rbf and Labview .through files.
  I know that I can deploy .vi using the target to ev3 and then upload these files to the PC, but I can't add script.
  Is it possible to compile .vi to the file?

  Sorry, try this

• Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Download file will not be

  Why can't get a Blackboard web site file to download on my computer, when I try told me that the file cannot be downloaded and gives a box that asks to restart, or cancel

  Hello

  1. what operating system is installed on your computer?

  2. which web browser you are using?

  3. you get any error message?

  4. are you able to download the file using any other computer?

  5. do this happen all sites or with any specific Web site?

  6. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps below.

  Step 1:

  a. click the Start button.

  b. in the start search box, type %temp% , and then on enter.

  c. delete all files in the Temp folder.

  Step 2:

  a. press the Windows key + R

  b. in the run, prefetch, type dialog box press ENTER.

  c. remove all files

  Method 2:

  If you are using Internet Explorer, try in no add-on mode.

  a. click the Start button.

  b. click on all programs.

  c. click on Accessories.

  d. click on System Tools.

  e. click on Internet Explorer (No Add-ons).

  Method 3:

  Optimize Internet Explorer from the link below.

  NOTE: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  http://support.Microsoft.com/kb/936213/ro

• Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem.

  Original title: installing the aol software

  I uninstalled some older versions of AOL, now I can not open aol. Get error saying: a necessary file to your aol desktop software work properly (snmaster.idx) unable to find to fix this problem. Please reinstall the desktop aol PFC snmaster.idx problem is I don't know how to install this software!  Help

  Hi Bruce,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the error message error message to reinstall the AOL software to fix file snmaster.idx missing after uninstalling older versions of AOL.

  This problem may occur if some data for AOL Desktop Software files are not installed in the correct location.

  You can see the AOL support article to install the AOL desktop software.

  Install AOL Desktop software

  You can also consult the support AOL article and check if it helps.

  Message: SNMaster.idx is missing

  If the problem persists, you can get in touch with the support of AOL for further assistance.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Whenever I try to print I get a window 'Print to file' and cannot print the label.

  I print labels on the site of the courier to the United States.  Now whenever I try to print one I get a window 'Print to file' and cannot print the label. So, how can I undo this command?

  Check your default printer, start-> settings-> printer and faxes-> right click on your printer and click "Set as default". I hope this helps.

• I get the error access path/file execution error ' 75 "you try to start a product.

  I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?

  Hello

  1. when exactly you get this error message?

  2 have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, make the boot minimum troubleshooting and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action.

  If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel.  Once there, I don't know where to go

  What is the attachment file extension? If you know what program should open with, just do the following.
   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: The appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
  This should allow you to open these attachments directly from email address now.