Refresh Deletede bookmarks - restoring works not

Similar Questions

• EliteBook 8770w new install of Win7, but the SSD mounted at the front and restore works not

  Hello

  I have a problem...

  I tried to clean my laptop and reinstall Windows 7 Prof

  I bought the laptop with standard HARD disk and a professional editing an SSD immediately. It migrated everything and changed this specific ssd and so on.

  Now, I want to renew the win7, but:

  1. the HP restore does not work. Don't know why?

  2. I want to install a win7 disc now, but where will I get the right drivers and so on?

  How can I do exactly?

  It will work like this:

  (a) install win7 disc

  (b) install hp support assistant

  (c) leave SA HP find all drivers?

  If not, how should I do this? I have all the original HP discs, so I don't know how to get all the necessary drivers for my laptop.

  Thank you very much and best regards,

  Marc

  Hello:

  You can find all the drivers for your model on the link below.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?lang=en&cc=us&sp4ts.Oid=5257513

  You can try the steps you sketched out, or you can manually install the drivers you need on the Web page above.

• My family disappeared from bookmarks, restore did not work, it nothing in the file wae, I found by chance "backups" in the trash! any ideas on how to get back them

  My FireFox bookmarks disappeared, there is nothing in the backup file, by chance, I found FireFox Bookmarks in the trash. How to make?

  SUCCESS! Found a reasonable backup of my favorites in the wastebasket of Windows. To answer a question on this subject there was nothing in the "Backupfile" Firefox was pointing to when I tried the restore of the bookmark. I found the backup file using Windows Explorer (a blow of dagger in the dark). Once I found this file, I went back to restore the FireFox bookmarks and pointed at the location in the Recycle Bin of Windows. My Favorites where restored, partially, but I was able to use them.

  Details of the location: C: > Recyclebin > Old Fire Fox data > Bookmarkbackups > Favx7nty -?. XXXXXXXX.

• Archiving and restoration works not-attention

  Hello

  Today, I edited a client page - knowing what I messed up (I did) I was able to restore.

  When I went to a restaurant, the oldest page to restoring it to has been my first edition of this morning. NOT the last working page / published.

  Live Chat with support from the BC explained that this is because all the archive pages are deleted after 90 days. And there is no way to restore the latest version of work.

  Essentially, this denies the entire restoration and Archive feature. Unless you make a change to each page on your site within a period of 90, you lose the last working version.

  WORKAROUND - has your customers save a non-edited version of the page to create an archive of first / original page. This ensures that they have something to return. Explaining that will be great fun also.

  Get your act together BC. This isn't version control.

  Hi Karl,

  You have the data for this reason after 90 days will be removed.  Thus, although unhappy Please note we note this in the section archive / rollback.

  

  Kind regards

  -Sidney

• All new phone lock question-restoration works not

  I just got a new phone and tried to erase the recovery mode because the device is picking up a random 6-digit and locking code. Unfortunately, it says that the device is not be restored. Is there anything else I can try?

  I do not understand what it means to 'clear the recovery mode '.  It could mean erase using recovery mode, or it may mean something quite opposite.

  In any case, try to use the procedure described in "Erase your device with the recovery mode" in the article of HT204306 you fixed above.  If this fails, contact Apple Support such as suggested in the "Get more help" section of this article.

• computer stuck on screen-light windows mobile bars but is not anywhere - safe mode feezes when loading drivers-system restore did not work

  Dell ionsipion 1525-VISTA OS - computer when asking to start the normallyor launch startup repair... .errors will not fix, go to the windows... page only the microsoft corporation and bar shows - lights on the bars are moving.  If I hit f8 and try to start in safe mode-sfe mode freezes while it loads the drivers - if I try the system restore, it says I have a corupt file and when I run disc chk it says all files are OK but then it asks me for another disc that i have not... any ideas

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And it means Dell back to factory settings if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• toolbar bookmarks, works not updated properly after v. 12.0

  Bookmarks Toolbar does not appear whenever I have first to open the browser. There is a space for it, but no icons are there. The only thing that works for me right now is to go "View > toolbars, uncheck bookmarks toolbar, then pull it back & re-check." It's a PITA, but it works. When I close the browser and reopen it I have to repeat the same routine.
  In addition, I sometimes lose the functionality of the Menu bar, it is there, but does not work.
  I tried to customize, restore default values and remove localstore.rdf solutions. Nothing has worked.
  Looking forward to a solution.

  mgraczyk,

  How that will reappear on someone's Favorites bar? The op said that the bookmarks are all there, but it is there no bookmarks toolbar.

  In any case, I would say it is time to do some serious troubleshooting.

  • https://support.Mozilla.com/en-us/KB/basic%20Troubleshooting
  • http://KB.mozillazine.org/Standard_diagnostic_%28Firefox%29

• When I select recently bookmarked it works ok, but when I select unsorted bookmarks it opens a window not closing cycles for a long time.and I want to close the window manually and not automatically

  When I use the selection recently marked with a bookmark in bookmarks, it works very well and load the page quickly and opens another window. but when I go to unsorted bookmarks and double-click on the desired bookmark it loads very slowly and cycles for a long time. If I go to the firefox icon in the Launcher on natty 11.04 with unity it shows two open windows. I click on the unsorted Bookmarks window and manually stop and it works well and unordered finishes, loading the bookmark page I was trying to see. Why the unsorted Bookmarks window closes on its own? Is there a setting I can do close automatically. It really slows down the loading of the page, I tried to see. well thank you for any help or advice.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Bookmarks toolbar & bookmarks button drop will work not together how we can solve this problem?

  It seems that if you have toolbar bookmarks running the button drop down bookmarks will work or not present with the other buttons even if its there when you customize, but if you turn off your Favorites bar then the bookmarks drop-down button appears, how that we have the bookmarks toolbar and button drop-down bookmarks menu appear at the same time?
  I have all my favorite sites on the bookmarks toolbar, but would like to have access to the rest of my favorites through the menu key drop-down for the moment I have to use the upper button left to go to my favorite firefox.

  You should see the button Menu bookmarks at the far right of the bookmarks toolbar if the toolbar is visible. You can drag the bookmarks menu button with the marker of fall to the left of the Bookmarks Toolbar items in the bookmarks toolbar if you prefer to see this button on the left side. This BMB button should be on the bookmarks toolbar if the toolbar is visible. Otherwise it will be hidden.

• System Restore does not work

  Just tried to use the system to erdicate problem restore, chose the restore point and set it to run, when she came back the message said that it does not, use an another restore point or try again, have now tried many times with different points, but each time the message comes back, restore did not work?

  Someone at - els had the same problem, if so, how you heal?

  Hello

  I think you should give us more information as your laptop model, operating system and the problem of origin before you tried the system restore.

  But as Akuma said if the system restore feature does not work, you can do nothing. You must back up your data and use the Toshiba recovery disc.

  Good bye

• Satellite Pro A300-1 system restore has 8 Vista works not

  I wanted to use the system restore because of the attempt to reconfigure the administrator rights, its somehow deleted all my shortcuts on my menu and messed with a few things.

  However, when I try to use the system restore (I tried to use it in safemode, via cmd promp, bunch together and normal), but all seem to keep hanging in the same green page where you can read something in the sense of "system is initializing restore etc" (spend 45 minutes on this page until I get fed up and shut down the computer). I tried to use different restore points the same thing happens. He loves his work not at all.

  Can anyone help with this please?

  My laptop is a Satellite Pro A300-1 to 8.

  Hello

  You mean the Vista tool, which is located in (Start button-> all programs-> Accessories-> System Tools-> system restore) does not work and you cannot set back the Vista until the early time?

  Well, usually there's not much to do to restore the operating system to start time the point you have to play the System Restore tool and choose the restore point. Then everything should run automatically.
  If this doesn t work while something is messed up as you said in your ad above somehow deleted all your shortcuts in my menu and messed with a few things possibly operating system was messed in.

  Try to clean the operating system by using the freeware CCLeaner for example. I also use it. It s great. Repair and clean the operating system and check if it is possible to use the system again restore tool.

  I also found this MS page:
  [System Restore: frequently asked questions | http://windowshelp.microsoft.com/Windows/en-US/help/517d3b8e-3379-46c1-b479-05b30d6fb3f01033.mspx#EIEAC]

• Envy of HP dv7-7332ea - System Restore does not work on windows 8

  Hey there,

  I recently bought this machine about a month ago. I used the Windows 8 System Restore feature to restore my pc to a previous state.

  However, after running it, I got a message saying: it failed and to ensure my anti virus is disabled. Accordingly, I have disabled Norton and tried again but it still does not work.

  Previously, the only problem I had with the pc was that he locked himself completely and therefore I turned off the machine that I have been unable to close.

  When I rebooted, HP Support Assistant could not run and so I uninstalled and then reinstalled from website theHP. It is now resolved. The thing is I'm a little scared that something is wrong with the machine that is the reason why I think that the system restore does not work.

  I'm a newbie on the computers here. Could you please give me some advice to diagnose if there is nothing wrong with my machine and fix the system restore?

  See you soon,.

  Damon

  Hi Damon,

  Norton is a component called 'Tamper Protection' that should be disabled before a system restore can be performed - for more details on this topic, see the following link.

  Disable self-protection.

  Kind regards

  DP - K

• System Restore does not work? Help, please

  Restore failed

  I tried to restore my system to an earlier time, but I get this message?

  No changes have been made to your computer. System Restore could not restore your computer about to restore specified. Select a different restore point, and then try to perform the restoration again.

  Restore failed

  I tried to restore my system to an earlier time, but I get this message?

  No changes have been made to your computer. System Restore could not restore your computer about to restore specified. Select a different restore point, and then try to perform the restoration again.

  =================================
  Sometimes the system restore may be blocked by others
  software... generally a virus scanner... ... Best bet run
  Safe Mode system restore.

  (315222) a Description of the Safe Mode
  Boot into Windows XP options
  http://support.Microsoft.com/?kbid=315222
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• System Restore does not work, once again.

  Hi, I read a topic of 2010 that has not yet been answered. I worked with a tech at Microsoft by e-mail, but when I answered: System Restore didn't work. Now it does not work yet. I had installed Returnil system safe, but I got an error msg 0 x 80004005, (third-party antivirus), so I uninstalled the program. I went through the registry and delete something with Returnil all 4 sections of the registry. Remove the common files folder that was left after uninstalling. Restarted my computer several times. I use MSE, with free versions of spywareblaster and MBAB, who are both at the request not in real time. I tried to restore to a time before I had installed Returnil first, (I installed and uninstalled 3 times in 2 days) and could not. I tried to use a snapshot to restore spywareblaster and managed to restore to the point 2 x before installing because forward the installation of point returnil has been altered. At the moment no malware has been detected and no threat of MSE. What to do next?

  Thanks in advance for any help. Liz.

  Here's my usual route to find out how to reinstall System Restore:

  If you have already run MBAM and SAS, temporarily disabled your antivirus and anti-malware applications and tried your Safe Mode system restore and you still get the restoration of the system to work, you must reinstall just your system restore.  You do not have to reinstall XP - just reinstall the system restore part.

  System Restore is a frequent target of attacks by malicious software.

  When you reinstall the system restore, all your current Restore Points will be deleted and you must restart your computer once the installation is complete.  After the reboot, a new Restore Point will be created as a new point of system control in your calendar of SR.

  If your system had a malware infection, it could be that some of the files in your old Restore Points are also infected up to wipe out the 'old' and new is often a good idea if you wonder if the old Restore Points are infected or not.

  Assuming that your XP is installed on drive C of your computer:

  As you go through the reinstallation of the RS, the resettlement will be asked to locate certain files as you go along and ask your XP installation CD.   If you do not have a genuine XP bootable installation CD, you can change the path where Setup looks for files one at a time, because they are needed.  More on that later.

  Navigate to the following folder:

  c:\Windows\Inf

  Locate and right-click the following file:

  SR.inf

  Choose Install

  If you can not see the sr.inf file, set up your system to show hidden files and show file extensions.

  Click on tools, Options, view and turn on "Show the hidden files and folders" and uncheck "Hide extensions for known file types", then you should be able to see the file c:\windows\inf\sr.inf.

  Installation can request files from the c:\windows\inf\386 folder.  It would be your installation CD bootable XP genuine if you have one and the Service Pack installed on your system must be the same as the CD that you will use.

  You don't need absolutely a CD to do the reinstall, because files must already be on your system somewhere if SR was working before.

  If you are prompted for a file, and you can't find it where I suggest in my example below (it works on my system), you need to search your hard drive and find where the files on your system.

  If the request to a file and you don't know where he is, let waiting for installation and click Start, search, and search for it
  has requested the file and find it on your system.  If SR has already worked before, the file is already on your system somewhere.

  Search finds the requested file, go back to the installation and specify the path where you found the file requested and click OK.  Installation can request several files along the way, but you can find them all.

  Here's how my system works when I reinstall SR when I pretend that I don't have a genuine XP bootable installation CD:

  When you are asked:

  SR.sys

  Point the install in c:\windows\system32\drivers

  When you are asked:

  c:\windows\system32\srclient.dll

  Point install it in c:\windows\system32

  When you are asked:

  Filelist. XML

  Point of installation at c:\windows\system32\restore (or c:\windows\ServicePackFiles\i386)

  When you are asked:

  srframe. MMF

  Point installation c:\windows\system32\dllcache (c:\windows\system32\restore)

  Once installation is complete, you will receive a message that you must restart your computer.

  Restart your computer and look at your schedule of SR.  You should have a new point system control in your calendar.

  When you get SR working again, I ran MBAM and SAS to make sure that your system is reasonably clean of malware.

  The day that you think you need to help the system restore you is not the day to discover the system restore does not work, then you need to test.

  After the reinstallation, manually create a Restore Point and test the restoration process and make sure that you are convinced that it works from one end to the other.

• System Restore does not work; error code 0 x 80070715

  System Restore will not restore an error occurred in the initialization of the program if the problem persists contact your system administrator. I tried 3 times still not work error code 0 x 80070715. Help, please.

  Hi margZX

  See if this post by Stephen Boots helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/how-do-i-fix-an-error-code0x80070715/c73c6aa1-0770-E011-8dfc-68b599b31bf5