toolbar bookmarks, works not updated properly after v. 12.0

Similar Questions

• Windows Media Center could not update Playready after that kb3004394 has been installed.

  Windows Media Center could not update Playready after that kb3004394 has been installed.  I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e

  and this procedure

  http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady

  Nothing worked and I'm pulling my hair out.  I use WMC with an HDHomeRun and a map of Time Warner cable.  This facility worked well for more than a year before installing this update.  The machine is a Dell XPS 8300 running windows 7 SP1.   I'm unable to watch all channels protected by DRM and I lost all my legally registered content.  It is a disaster and cost me 30 hours and counting.  Anyone have any ideas?

  I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.

  Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0

  But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.

  If not, allows to see what MS themselves have to say.

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• 15 HP, pc laptop 15-g019wm: windows 8 will not load properly after reinstallation of windos 8

  Hello... my laptop HP 15 / 15-g019wm / product # F9H60UA #ABA has been very slow. I went the parameter/recovery/delete everything and reinstall windows. I worked a lot better after the relocation. However, after power off and power on... I get the windows start-up screen... I click it and it turns into a green background screen (mouse can move) and nothing else. Any help would be appreciated

  Restart the PC when it comes to what the splash screen let him stay there untouched for an hour, see if things will sort the.

• Record in the table don't is not updated correctly after sail of detail page

  I have 2 jspx pages (page A) a table showing the employee record, another a (page B) is used to update the file of the selected employee. On the page, when the button select a folder and clicking on the 'details' I may be navigaed at pag B on which I can edit registration information in a form component. I have a table column 'Prospect', which applies to a LOV layer VO pageB I use < af:inputComboboxListOfValues > to display a combo of LOV for this attribute, when I enter a new value here and save it, I can go back to page one, but the name of the team for this record shows empty, by querying the database that I find the record updated successfully with the changed value. And when I reloaded the page this record may indicate the new team name value. Why it is not updated in the employee table, when browsing immediately return of page B? I put the table attribute to 'always', but always refresh iterator not. Can anyone help with this? Thank you!!
  
  BTW, for the other columns (not LOV), they are ok, the table can display the value correctly.
  
  Published by: user774592 on July 14, 2011 19:56
  
  Published by: user774592 on July 14, 2011 21:59

  What component to use to show as filed?

• Clock widget will not be updated properly after 2.2.2

  I noticed that after the recent 2.2.2 downloaded all the widgets clock on my 2 Ciq update not timely. I tried a few of those. This includes the Motorola Date/time widget. Several times the displayed time is running 10-15 minutes late.

  Anyone experinced similar issues or has any ideas?

  Thank you!

  Have you tried to remove the app and then restart and then redownload the application and see if it works correctly?

  You may need to do a factory reset, but lets leave that as a last resort.

• RMBP do not close properly after the update of Win10, 1607 (birthday)

  I have a Mid-2015 retina MacBook Pro with Windows 10 set up as a Boot Camp partition. I installed the update of the anniversary 1607 yesterday, and now the machine is normally the side off Windows. After selecting stop in the Start Menu, the machine goes through the process of turning off, but the keyboard is turned on and the fans turn gradually up to max speed. If I press the power button on the keyboard, even for a moment, the machine finishes the closing sequence and lights out.

  I have reset the SMC, but has no noticeable effect.

  Curious if others see a similar behavior, and maybe somebody has a suggestion for a fix.

  In Device Manager, locate unknown devices (yellow triangle with an exclamation point).

• My Windows XP Home Edition is not updated properly and I don't have a firewall after that I did a system restore.

  I have Windows XP Home 32-bit Edition. I got it since 2002. Its a PC Compaq laptop. I recently did a recovery system just to start fresh and clean with it. I have a legitimate copy of XP came with my computer, when it was new. I've loaded my records as guest and followed all the instructions. When I went to do some update, she had no auto update option to control panel (Classic view) and no windows firewall or even windows Security Center. It's default values on my new computer. I tried to update manually, but he repeats to me "the server was not respond" as soon as it gets for files and downloads from the download section of the patch of "Service Pack 1 A Express." I also looked for a download of Service Pack 2 and the only one available is for the professionals for the networks. I have no idea why this continues to be. I even made a second recovery, thinking I've done something wrong.

  Hello

  You should be able to download the Service Packs as a stand-alone Installer on the following links:

   

  Windows XP Service Pack 1 has Express Install (32-bit) for end users

  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=19751

   

  Windows XP Service Pack 2 network installation Package for IT professionals and developers

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

   

  Windows XP Service Pack 3 network installation Package for IT professionals and developers

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If you can not download to your computer, and then use another computer to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  How to obtain the latest Windows XP Service Packs

  http://support.Microsoft.com/kb/322389

  Let us know if this information useful.

• Adobe Acrobat Pro XI do not behave properly after winning 10 update

  Since the upgrade to Windows 10 XI of Acrobat Pro does not behave correctly.

  1. when I click on piece attached in an e-mail to open or make a right-click to print it always asks to open or save.  He has not done this before and I don't want to ask.

  2. when I print in PDF is no longer he wonder where to save it and I can't name the file as I want.  He saved just in my office, which is good, but I could always give the file a name and now I can't.

  3. when I try to close one of my PDF creations now I always get a box on the removal of hidden information and I have to click and option.  I just that it closes when I close.

  I looked everywhere in the program and updated (11.0.13) and repair the installation.  How can I get to behave like before without having to click, click so much?

  Thank you in advance!

  Hi Sheraldia,

  1. Please disable and enable Adobe Acrobat add-in for Outlook by clicking file > Options > Add-Ins

  2. to change the settings of the Adobe PDF printer so that he asked for the name and location,

  Go to the devices & Printers

  Right-click on the Adobe PDF printer select Printing Preferences

  Adobe PDF output folder in the drop-down list, select Prompt for Adobe PDF filename

  Click apply & OK

  3. for the last of them, please share any screenshot or PDF file.

  Thank you

  Abhishek

• Satellite L300 did not initialize properly after installation of MS Word

  I would like to know why after Microsoft word 2007 on my laptop, after turning working once again, it would not load.
  I went to f8 and it came with starting pitcher repair it is as well as what I've done, then when he's looking for repair was finished.
  He said that he could not repair automatically. So he died.
  When I turned it back started with ok.
  Anyone know why this happens.

  Who knows why this happened
  Seems that something was wrong with the Windows operating system installed.
  Something like this always happens
  I think it was a bad luck that happened after the installation of MS word, I think it could also occur after installing any other software...

  However, the unit seems to start properly so it was just a matter of time

  Welcome them

• Camera HP photosmart C4480 printer does not print properly after changing ink cartridges

  My printer ran low on ink... I replaced both cartridges, after which I was instructed to print an alignment sheet. It does not write legibly. I tried to reproduce this sheet several times with no improvement in quality, therefore it does not meet an alignment check. How can I improve the quality of printing? On my old printer, I used to be able to "clean head", but it does seem to be this option on this printer, or is it?

  Hello

  -What version of Windows is installed on your computer?

  Please follow the steps mentioned below and get back to us with the results.

  Method 1:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01637692&cc=us&DLC=en&LC=en&product=3418705

  If method 1 did not fix the issue, please continue with method 2.

   

  Method 2: Update the printer drivers and check.

  Update the drivers of HP using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3418705&

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If still you face the same problem, I suggest that get you in touch with HP support for help.

  I hope that helps!

• Auto populated areas do not update/Populate after a correction to the field

  Example:

  We have a field name used in the document:

  Employee Name_1 on page 1

  Name_2 used on page 2

  Name_3 used on page 8

  Employee Name_4 page 10

  If the script is on the Name_1 first employee, and it works fine. Type your name and fill in the other three fields as if by magic.

  Save the PDF file, go get a coke or pot break.

  Open the saved PDF file and you see a typo in the employee field Name_1, in order to correct you. Ah, now, it is not automatically complete the rest of the employee_name fields:

  Here is my script:

  the value of power reactive

  var a = this.getField ("Name_1 employees");

  var two = this.getField ("Name_2 employees");

  var 3 = this.getField ("Name_3 employees");

  var 4 = this.getField ("Name_4 employees");

  This function which checks if the destination field is empty and if so popluates it.

  function checkAndPopulate (orig, populate) {}

  if(Populate.value==''||) Populate.Value == null) {Populate.Value = orig. Value}

  }

  Copy the value from one to two, three and four

  checkAndPopulate (one, two);

  checkAndPopulate (one, three);

  checkAndPopulate (one, oven);

  Don't know where my mistake my being?

  Any help?

  Thank you

  jr7138

  I recommend not not using the event about the blur and put the script in the field Name_1 validate event. If you want to update the values for the other fields when it is updated, whether empty or not, the script can be simplified as follows:

  Validate a custom for Name_1 field script

  getField("Name_2").value = event.value;

  getField("Name_3").value = event.value;

  getField("Name_4").value = event.value;

• Acrobat 9 Pro (Master CS4 Suite) works not at all after installation

  I had to reinstall all my software Adobe CS4 after I restore my iMac any HD issues I had with other things after upgrade to El Capitan (initially before restoring HD no problems with Adobe Acrobat Pro).

  Now with the own drive, I reinstalled my software including Acrobat Pro, and everything seems ok except my Acrobat Pro. I uninstalled and reinstalled just that as uninstalled and reinstalled everything and it still doesn't work.

  When I first open it upwards, he said: there are some missing items that need repair. I've attached a screenshot of the message. So I say keep and all I get is anything other than 'Acrobat' in the main menu choices but nothing underneath, no help no menu nothing. And when I try to stop it it won't let me, I have to force it to quit.

  Can anyone please help me why it does not work. I'm in my mind filled with questions of El Capitan and now having this problem just because I reinstalled it on my own HD again.

  

  Adobe does offer not supported for CS4, as we know, even if we paid for the software it is basically our bad luck now if we have problems. Hoping someone can help me on this problem through the forum, including Adobe support please

  Thank you

  Hi MightyMaya,

  It may or may not work, difficult to guess as its on an unsupported platform.

  We will recommend so you can use the application in a supported environment.

  Kind regards

  Nicos

• Windows Vista downloaded update, start-up went in the update configuration but does not update, but after a minute or so stops and it's a cycle.

  Update configuration without end with 0% then stops then after configure updated again with 0% and shuts down again and it will be just a cycle... What should I do?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  http://support.Microsoft.com/kb/949358

• Manager application is not update/install after the first download

  I just bought an annual membership on creative cloud.

  I downloaded the .dmg for the Application Manager - trying to install but it is stuck at "update of Adobe Application Manager", it has not moved for an hour now?

  Hi I van,.

  Test the installation from another account user with administrative rights.

  -Dave