Refresh only the left side of the cascade point shuttle LOV

Similar Questions

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Officejet 6000 only print left side of controls. prints everything well.

  HP Officejet 6000 printer, system is Windows7. We use an insurance agency software and I am trying to print checks and the printer only prints the left side of the check and heel.  The software is ok because I can print checks very well of our generalization printer that uses the entire office.  I can print emails, documents, etc. of the Officejet and they print the entire page.  It's just the checks that print weird.  This has even puzzled IT society.  I tried the HP print and Scan Doctor thing, and he said that everything is fine.

  Any suggestions?

  Thank you!!

  I'm back in business now! Print controls very well. We all remote on a server and I got the printer installed on my desktop, but not inside the server, and I don't even think it.

  Thanks for your help!

• Screen goes black and only the mouse pointer visible to the windows xp screen

  My computer has used to work without problems.  Now, when I start it upward, to the Windows XP start screen, the screen turns off and all that is visible is the mouse pointer.  I tried to start safe mode, and it does give me even the option - not even if I press F8 at startup upward.  What is the problem with my computer and what can do?

  Thanks for your answers, Dena and Jojih.

  The screen went black and all I could see was the mouse pointer.  There is no ameioration or changes on the hardware of all kinds.  I wonder if one of my employees has a virus on the computer.  I could not do in safe mode, even if I tried to press F8.  If I put in the Windows XP CD, the screen would go black after that he loaded the system files, just like at the start of Windows XP.  So I used Acronis PC Backup and Recovery and make a recovery disc and used to reformat the hard drive and then I reinstalled Windows XP.  Everything has been great to work for.

• Better display of the values of shuttle LOV in a report

  Hello
  I created a LOV shuttle service in a form, then a report indicating (among others) the values chosen this LOV shuttle.
  If the user choose multiple values I don't like how they appear in the report (they must go in a single cell) because
  the user sees a list of items separated by ': '.
  Is there a simple way to show them for example as a list of points of ball or another form readable nicer human?
  
  Thank you
  Antonella

  Hello Antonella,.

  use

  select case when your_column_name is not null then '
  '||replace(your_column_name,':','
  ')|| '
  ' end as shuttle_column
  from your_table
  

  to avoid the ball when you have a NULL value.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Boots system to black screen with only the mouse pointer, ChkDsk finds the same mistakes every time, but does not drive.

  My system has the latest updates installed, but it has not restarted when a power failure occurred.  System ran file check at startup and started to only black screen with the mouse.  Sticky Keys dialog box and file sharing is just what works.  System Restore find restore points, but fails with errors.  System repair find anything wrong.  ChkDsk /f and / r always produce the same result with about 30 files deleted from the index, and then these same files recovered orphans.

  I cloned the drive to another and get the same results.

  All modes of security also start to black screen.  CTRL-ALT-DELETE, CTRL-SHIFT-ESC, WIN-E, etc.  do not work.  Only 5xSHIFT brings a dialog of the keys sticky.

  Via a command prompt I can read and write files & folders on the boot partition as if nothing is wrong.  Same thing with shared files on the network.

  I asked about this on the forum to update and have no solutions.  Could someone please help?

  Thanks in advance.

  BestPartyBand,
  I'm sorry to hear that none of the solutions that we offered was able to solve your problem.  I know how very it can be frustrating to have to start all over again with a clean system, especially with the amount of work you have put in get your network configuration.  I have not found anything that could solve your problem without reformatting, unfortunately.  I didn't want to point to one of the articles I sent you a link to (when you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen.)
  http://support.Microsoft.com/kb/946532 this article talks about the corruption of system files in the $Txf directory. This corruption causes a situation of deadlock between the Transactional NTFS (TxF) and the automatic verification process.  I think that is what has happened on your drive hard when the crash occurred.  Here is a good article about this in detail that you might find interesting technically: transactional Ntfs and loss of data
  http://www.articlesbase.com/data-recovery-articles/Transactional-NTFS-and-data-loss-778234.html

  I hope that it works for you, let us know if we can help you.
  Thank you
  ) Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista - blank screen with only the mouse pointer at the start - tried everything

  My laptop (Dell Latitude E6500) stopped recently begin correctly recently - one morning, he froze connection so I powered it off and then on again. When he started to I only got a backlit black screen with a mouse pointer - nothing works, clicking or Ctrl Alt Delete.

  So far I have tried the following:
  • Dell Diagnostics tool - no problems found
  • Safe mode - the same thing happens in all modes of security
  • Restore the system using CD of Vista - no restore point
  • Repair the system using the Vista CD - no error
  • Essentially, nothing to do with the Vista CD solved the problem, so I tried the forums

  • I tried to rename the "Logs_bad" event logs and by creating a new "Log" folder in windows\system32\winevt\ - does not set it
  • "I renamed' software ' to 'software_bad' in windows\system32\config\ and 'software_previous' in 'software', as suggested Mr. Bakir in http://www.nuonsoft.com/blog/2009/05/02/possible-ksod-black-screen-of-death-solution-for-windows-vista/, but it did not work.
  • I also tried a few things with Regedit but not had any luck with doing work again.
  • I tried the trick of "StickyKeys" discussed on many forums, but this does not work - I had turned it off or the computer is not grateful for entry; I do not know
  • I copied explorer.exe working copies, taskmgr.exe and winlogon.exe from a broken computer work computer, it did not resolve anything.
  Are there solutions more I can try? There must be something I can replace/remove/change in order to get Starter beyond this point where is seems to 'block '.
  Install a fresh windows isn't really a preferred option.
  Any help would be much appreciated

  Hello

  ·         At what stage of startup you get this black screen?

  I suggest to refer to the link below and check if it helps to resolve the issue.

  http://support.Microsoft.com/kb/977675

  If you have not used the repair which is a system repair option in Windows vista start DVD, you can use it and check if the problem persists.

  To open the Startup Repair refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  For more information about the Startup Repair, refer

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I hope that helps!

• Black screen with only the mouse pointer

  I just bought a Toshiba with Windows 7 laptop. Black screen with the mouse cursor after a few minutes of no use.  It seems to be the activity of the laptop but nothing happens even with a Control Alt Delete. I noticed after like 20 minutes, the windows screen comes back on.  Any ideas to solve this problem.

  Hello

  Since there seems to be a fairly new computer, you should check with the seller and the support from Toshiba
  for possible replacement and/or warranty repairs. Remember that do you more that they can
  It's something that you don't.

  Check with Toshiba support, their books online and the drivers and their known forums
  questions.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ----------------------------------------------------------------------------------------------------------------

  If you want to solve the problem:

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Why I can't read text of ASP?  See only the culminating point (red) text box

  Attempt to modify an ASP of favorite videos.  When I click on edit, red box nail appears, but text is invisible or mixed in the background.

  How to reveal the text to be modified without changing the project?

  I guess you're a model and simple possession of one does NOT guarantee success in AE - they assume that the user has a less an aknowledge base of demand and often more.

  So if you are just starting in AE, do yourself a favor and get a few basics:

  Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

• Clonning only the DB layer

  Hi all.
  I have a script similar to the following:
  I have a production server and a test server (the clone of the production server).
  I want to clone (refresh), only the production database to test the server.
  I read the metalink doc 230672.1 .
  In section 4 of this document, it is said, is it possible to clone the db only.
  My questions are?
  
  1. once I did the process of clonning of meadow on the source, I copy folders (sid = prod) both proddata and produced in the target?
  
  2. when I run the adcfgclone.pl, it is necessary to specify the context of target database file? (in both servers, I have the same folder structure)
  
  3, as I understand it, I have to follow the doc 230672.1., but only regarding the dbTier, right?
  
  Thanks in advance, Soni

  1. once I did the process of clonning of meadow on the source, I copy folders (sid = prod) both proddata and produced in the target?

  Fix.

  2. when I run the adcfgclone.pl, it is necessary to specify the context of target database file? (in both servers, I have the same folder structure)

  Since no changes have been made on the database layer, then you need to specify the context of database file.

  3. If I understand correctly, I must follow the doc 230672.1. but only regarding the dbTier, right?

  You must follow the steps in accordance with article "Updating a target system" in this note to refresh the database on the target system.

• Is it normal for a Macbook Pro operate at a temperature of more than 60 degrees celsius with only the navigation? Left side warms also many...

  My Macbook Pro Late 2011 very hot especially on the left side. Temperature exceeds the 60 degrees celsius, with only the navigation. Is this a normal behavior? Fans operate at a SPEED of 2000 more or less. I would like the experts to guide...

  From what you say, it seems that your MacBook fans work as usual (and unfortunately), and 60ºC is a good temperature for a MacBook Pro, so I don't think that there is nothing wrong with your Mac. Note that the temperature may also depend on what websites visit you and complete what they use. for example, Java and Flash Player increases CPU utilization and the battery, and this, temperature.

  In addition, note that your MacBook Pro is made of aluminum, and it can quickly become hot even if you don't do any heavy task. This does not mean that there is nothing wrong with it

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• F4400 prints only on the left side of the page.

  Hi, I have an impression of recent problem out of the web pages with my HP F4400 all-in-one printer/scanner.

  It will only print the left side of the selected page to a web site.

  However, it will be to print documents from my computer with no problems at all, the problem with web pages, that is my bank statements, for example, it cuts off the right side of the text.

  I use the Windows 7-64 bit operating system.

  I don't remember having this problem before today, and I can't imagine a way to clear it up.

  Any help will be appreciated.

  Thank you.

  Hello inkie

  I would say that it is most likely a problem with FireFox. You can back up your bookmarks and reinstall the browser. If the problem persists, there may be a setting in FireFox that should be changed since the update, and you may want to communicate with Mozilla. I can help you to reinstall the printer driver, as it could be related, however, I think that this isn't probably also another browser running.
  Support for Mozilla

• I can only place icons on the left side of my desk. How can I do so I can place them anywhere.

  Question of office

  I can only place icons on the left side of my desk.  How can I do so I can place them anywhere.  The Startup icons in my taskbar, are also in the middle.  How can I move them to the left?  The crazy kids got a plug of the computer and swiched everything on accident.

  Remember a "good date" when your office was in good condition?
  If so, do a system restore. Choose this "good date" or before this as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• HP Officejet 6210 All In One prints only on the left side of the page

  After good results, I tried to print a "retail Transaction" of Quickbooks account form twice with the same result:

  info. prints only on the extreme left, a straight line down...   I did adjust the paper tray.  What could be wrong?

  Thank you for your time and your advice.

  Texas-sleeper

  Salvation to the texas-sleeper,.

  I understand when you print from Quickbooks print right on the left side.

  I'll be happy to help you.

  In the program you are trying to print from, click file and then click on print. The print dialog box opens.
  Select your printer, click printer properties or properties.
  Click the paper/quality tab.
  In the press or type click on the dropdown menu, select the type of paper that matches the paper loaded in the paper feeder and the desired print quality, paper size, select the correct size of paper.

  Make sure that the appropriate paper size is also selected in Quickbooks software.

  Try printing a different file where this file is corrupted or damaged.

  I have provided a document of Quickbooks print does not correctly.

  Solve common printing problems.

  Try printing from another application to see if there a software problem with the printer or application you are printing from.

  I hope this helps.

  Thanks for posting on the HP Forums.
  Good day!