refresh time

Similar Questions

• Materialized refresh time

  Hi all

  We have a view, materialized in prod

  We use a toad,

  I want to know what time interval internal the materialized view is refreshed.

  View Materilized	Schema	Update	LastRefresh	R type
  xxxx_MVW	XXXX	NO.	09/07/2015-12:33:42 AM	ALL THE

  Thank you

  There are three mode of MV refresh REQUEST, COMMIT and NEVER.

  APPLICATION - this is when the user uses the oracle supplied as DBMS_MVIEW to manually refresh the MV. When recharge them the MV is totally up to the user.

  VALIDATION - this is the operation on the base table is engaged.

  NEVER - MV is not refreshed

  So when you say INTERVAL I guess that you have a scheduled job to update the MV which means the MV is defined as REFRESH on DEMAND. Therefore focus on the definition of WORK namely the refresh interval.

• Inconsistency in the refresh time cube in different environments by ODI

  Dear all,

  We are having a classical planning and a consequent Application cube Essbase BSO. ODI is used as the ETL. During the loading of metadata we use IKM SQL for Hyperion Planning. Update the database on the target is set to TRUE. The problem we are facing is that with absolutely same interfaces in Prod and Dev and an equal number of records, the interface which inserts entries and update the cube takes ~ 9 seconds to run developing while it takes about 22.9 seconds to run Prod. I'm talking about here is a sparse dimension with skirting 786 records. For Dense dimension the time difference is much more. Thus, the interface that works for seconds or extends to maybe a minute takes hours to run in Production which is causing a huge concern and reputation is at stake in front of the customer.

  I am a novice in ODI, all the experts please shed some light on what should be the approach to analyze it. What are the parameters I should check, from the point of view Admin and this track. Need your urgent response.

  I'm guessing just that it runs a complete restructuring when you do not expect, you need to verify it is what is happening.

  If the problem points to ODI and you can replicate the problem then log a call with Oracle to work around the problem, you can run an update utility command line planning who you should be able to call ODI, according to which the officer is placed.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Groups refresh time take to finish

  Hi all
  I have been looking for this thing for a long time, but he came out with nothing.
  
  I have 104 groups update going during the night. Given that I add to all the RGs tables to replicate, I need to know when is the update take a group of discount so that I can control if the added tables create problems for night work.
  
  I have Oracle 10.2.0.4 and I also have the Pb on Oracle Grid.
  
  Any suggestions? Both via SQLPLUS or Oracle Grid.
  
  Thank you!!
  
  Phelit

  Hello
  If you know the start time, then use the following query.

  Select Mview_name, REFRESH_MODE, REFRESH_METHOD, OWNER, ALL_MVIEWS LAST_REFRESH_DATE;

• esxi set time via ntp if lag is more than a few hours?

  Today, I discovered an additional step.

  If you standup a server esxi with a static ip address, you must manually assign the ntp servers.

  Fair enough, if you set the ntp server and tell it to restart ntp, you wait to update the time.

  If the offset is too big between the client and the server, it will not set the time.

  Is this a standard behavior of linux, I've never seen.

  If your time differential is too large it will not refresh time from ntp server, until you set it manually once.

  This is the behavior that I lived on four systems of 4.0u2, I place today.

  I had similar problems, don't know what I did to solve it, but I never got it again since I started to install ESX in following these steps about the hour.

  1. set the BIOS to the UTC clock

  2. install esx

  3. connect through the client vsphere, go to time config page and put in place NTP with pool.ntp.org, restart the service.

  bounce of the ESX box, re - connect and the time is perfectly synchronized with my local computer.

  I hope this helps.

• How to make the data refresh

  Hello
  
  I have to update our database of production of a warehouse. There are a number of tables to be refreshed.
  
  Now, I can not have materialized views makes additional updates since the warehouse tables have no newspapers mview on them. Then I go to updates of the complete table. So I create a temp tables, freshen up first and then post it in the production tables. I use temporary tables instead of refreshing production tables directly on the remote tables to reduce the refresh time of the production tables. The code example below.
  

  begin
  execute immediate 'create table table1_temp as select * from remote_tab@dblink';
  execute immediate 'drop table prod_table1';
  execute immediate 'create table prod_table1 as select * from table1_temp';
  execute immediate 'drop table table1_temp';

  Now, I read it somewhere that the temporary tables can fragment the disk space and adversely affect the performance of DB over time.
  
  Could you please suggest alternative strategies for this task and their advantages and disadvantages?
  
  Thank you
  CJM

  user13102515 wrote:

  I think I'll go with materialized views. But is it possible that I can get updated incremental on mattress views without mat view logs are defined on the base tables (also not all tables might have columns such as creation_date or last_update_date)?

  If you want to control the update with the logic and processing that can indeed be done using a materialized view, you can consider the following.

  -Use a DEC (create Table as Select) to create a new table.
  -Add the clues necessary to the new table (and provide subsidies are necessary).
  -Remove the existing production table (or rename).
  -Rename the new table as the production table.

  This approach works well when the last step is an exchange of partition - penetrating the new content of the table to partition table and exit the old content.

  The thing to remember is to keep it simple (KISS) and not reinvent the wheel. Oracle has a rich set of features and offers great flexibility.

• Online to add the dimension member and refresh Essbase

  We have a budget request that requires adding new members to the entity on the fly and hope that we can avoid the services because of the Essbase database refresh time.
  
  No workaround can do that?
  
  Thanks for your advice!

  I wish I could tell you it was something I came up with that, but my ego will have to take the...

  Create oh, 30 members in a dimension requiring members. Here are the members of your add-on-the-fly.

  Do not put any data in them.

  Modify your form to delete missing.

  Create a HBR that can users to launch which allows an allocation of 1 member in a combination of members not used (garbage account, BegBalance, whatever).

  Put in a RTP that allows them to enter 1 to the Member (use of the RTP scope definition in HBR member limit to your new 30 members).

  Now you have a form that displays your new Member because deleting missing no long don't delete NewMember n . (You can hide the column that contains the 1 or something else that defines the data.)

  Put a text field of planning on the form allowing the Scheduler to add the name of the Member (add another alias, if you care to).

  In the night, run an ODI (or DIM or HAL) process that extracts the text value, it is up to the Member, and then builds a dimension.<--Okay, this="" bit="" i="" actually="" came="" up="" with,="" the="" rest="" i="" think="" i="" first="" heard="" from="" john="">

  Complicated, isn't this it? The last piece with ODI could be replaced by a human process that follows the text field (or the text in the cell) and the dimension built manually with a refreshment during the night.

  Workforce planning issues (not this one, but similar to) like this through SmartLists galore, but they are difficult to realize as metadata becomes data.

  Kind regards

  Cameron Lackpour

• page of coverage in the new firefox?

  I've been using Firefox for some time and love it. But before this new Firefox, I would like to know...

  The former "tiles" is kept in the new Firefox?

  the tiles are as a bookmark to a page displayed in a new empty tab. Here is a picture of what I'm talking about on approx...

  https://blog.Mozilla.org/blog/2012/06/05/Firefox-has-a-redesigned-home-page-and-new-tab-experience-that-make-browsing-the-Web-faster-and-easier/

  Latest version, they took auto-refresh timer on a tab, I still miss it. I used it on a weather page, so I always know the latest weather at a glance. Now, I have to remember to refresh the page when I watch it.

  Yes, the new tab page should still work.

  • https://support.Mozilla.org/KB/new-tab-page-show-hide-and-customize-top-sites

  See also the Release Notes:

  • https://www.Mozilla.org/en-us/Firefox/35.0/releasenotes/

• The SERVER NOT FOUND message constantly makes me nut

  Please help me, I've been with this issue for almost a year. I always get the server not found error and have to hit refresh time evey to load the page. It happens randomly, I noticed there are hundreds of people with the same question. I have found no resolution online. Help, please.

  Hello. You are using an old, obsolete, obsolete and unsupported in version of Firefox. Please make a update of Firefox 10 and check

  • getfirefox.com

• Need new Lap Top Qosmio X 500-02 M

  Hi all, new to this forum so forward to reading some of your expert advice. Time to upgrade my laptop... again, I'm looking at the 500 X 02 Mr. I want better fastest lap top that I can get my hands on what I'm doing... is that it?

  * I will he use for the following: *

  Using the internet high speed, must be very fast to opening many pages and let me scan between all open websites with a fast refresh time.

  Discussions on the Forum, I speak on the forums a little and they take some time to refresh when I'm on 3-4 at a time, must be fast here.

  Photography and photoshop, I have downloaded the Adobe Lightroom 3 (when it is published) on the laptop. I'll also have a 500GB hard drive with pictures on this topic only. I expected import of external hd for photoshop. I don't want to wait all day to import and to work on pictures.

  I'll also watch DVD, including Blue Ray and I know the X 500 02 M supports this feature.

  I realize that this laptop is mainly for players, but will it also to meet my needs, I'm not a gamer so if there is something else out there, it's going to do the same job in Toshiba please let me know. I really care about this model well and I did a little research.

  I will also get the backpack of game and a few other odds and ends. Please recommend any additional extras that you think would be helpful.

  Cheers, look forward to answers...

  To be clear, Qosmio X 500 is better portable multimedia designed by Toshiba and if you buy it you will have a new and more powerful hardware peace.

  After reading what you wrote, I think that it is a good decision to buy this laptop Qosmio.
  For best performance, you need to optimize OS preinstalled. What does deletes everything preinstalled, you do not need, install your favorite applications, disable or unnecessary processes and services, make sure that unnecessary applications do not start with the OS. I think you know what I mean and you probably don't have this already before you start using the operating system.

  I don't know how it works in Australia, but here, in Europe, you can buy some products and test for two weeks. If you don't like it you can return it. If it is the same in your country, buy it, test it and make sure that you choose the right product.

  Please inform us of your experience with this multimedia toy.

• With the help of Atrix unlocked in Germany

  Hello

  so, I took my Atrix unlocked (from AT & T) today and flew to Germany via the Netherlands. My us T-Mobile Prepaid SIM did not work then I inserted a German SIM card when I was still in the Netherlands, and he recognizes the Dutch supplier and showed his name on the upper left corner. There is however, no refresh time phone which was already suspicious. I was able to text and call from the Netherlands well.

  When I arrived in Germany would not even appear the name of my provider. I was able to text and talk, but mobile internet does not work which sucks! Time to network provider does not work. What can I do to make it work?

  Thank you!

  Hello

  I just had to set a digital CAMERA. Internet works now. The process through rooting the problem of time to network provider and show me the top supplier of the screen?

  However, I think that I would not root because of the question of the name and the time...

• Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

  A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

  After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

  My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

  So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

  Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

  I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

  So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

  As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

  Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

  As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

  My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

  So my question is:

  Why cares Windows Update that I have 4 GB of memory installed?

  Thank you

  Jon

  1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

  2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

  3 No.

  4. No, I put together this computer myself.

  ______________________

  To answer my previous posts:

  I think the USB storage is a separate issue. And.

  I think I * may * have solved the problem of origin with one or more of the following (don't know who):

  • Updated the software of the chipset of the card from my mother.
  • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
  • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
  • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

  I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

• upgrade ram to 4 GB aspire ax1920-ur22p

  I have tried 2 sets of ram. New RAM gives just 1 beep long and does not post. Original ram (1 to 2 GB stick) works very well. New ram is 2 sticks of 2 GB ea, but even if I put 1 Stick, it still does not.

  Hello

  Your original ram:

  KN.2GB0H.009 - UNIFOSA GU512303EP0202 2 GB DDR3 1333 MHz UNBEFFERED

  Your new RAM:

  I have no find any information. (S23798C is not a part number). I think that it is not compatible.

  "Beep code":

  A long beep: memory refresh timer error.

  I suggest you to buy an another Unifosa stick 2 GB memory.

  Note:

  P/N: DT. SG8AA.002

  Model: Aspire X 1920-UR22P

  OS: Windows 7-64 bit

  I wish you a Merry Christmas!

• Classes of the micro sd

  Buy me a class 2, 4, 6 or 8 for the right-hand in the Clip + do you recommend? What class of micro sd you have on your Sansa?

  Don't think that there is a map of class 8. Personally, I'm perfectly happy with the class cards 2 for the price. Higher speed cards are going to be considerably higher in cost. Loading and possibly refresh time could be a little faster with higher class cards, but playback will be exactly the same.

  Maybe I am just frugal.

• Session timeout

  Hi all

  Can we increase the foglight session as the console is very quickly get overwhelmed.

  Please help me in this regard.

  -Shiva

  Administration-> users and safety management-> user Session settings.  The default value is 60 minutes, but if the dashboard is not refreshing, the browser itself might be time you.  Check your Configuration-> user preferences and see what your default refresh time.