Reg: Normal and a set slider

Similar Questions

• Where can I go to adjust the size of the police of the headers, tabs, toolbars? Messages, pages, on the screen appears normal and can be adjusted using ctrl +-.

  Run Firefox 28.0. Just updated, which did not help. On Firefox and Thunderbird font size increased to headers, tabs, toolbars, drop-down menus, etc. What's on the display appears normal and can be adjusted by using the CTRL +. Has no effect on the toolbars, headers, etc. My resolution is to the max, small icons, the size of the text to 100%.

  You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

  • http://KB.mozillazine.org/about:config

  See also:

  • https://support.Mozilla.org/KB/Forum-response-zoom-feature-on-Firefox-22

  An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

  You can watch this extension to adjust the font size for the user interface.

  • Theme font & size changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

  You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• How can I get my settings to save a window opening in Middle normal and maximized.

  Original title: cannot get windows size to save.

  How can I get my settings to record with respect to the windows that open in normal and maximized parameters.

  I did the right click on Solution Explorer icons and maximized value, but they open into small windows.

  Thank you

  Here are some instructions I've done for people who have this error message and are sometimes a little nervous about editing the registry:

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\system\currentcontrolset\control\windows]
  "ErrorMode" =: 00000002

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fix13.reg

  After you save the file, close Notepad.

  Locate the file fix13.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fix13.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fix13.reg file when you are finished.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• Get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed).

  Original title: necessary emergency aid

  Windows lost completely. After trying a variety of things, I finally got one to start, but my entire system had returned back to the year 2012.

  After updating my anti-virus and other security programs, I tried to check the updates of Windows, but I get a large red cross saying that the system is not operational. Went and checked in services.msc and the setting says Automatic (delayed). You run the Windows Update Troubleshooting Wizard and he said that he had set things so I rebooted to try check update again. However, I get the same message.  There is nothing showing at all when I click "update history", but check "updates installed" shows things are fine until 2012.

  Please, how can I get my system again right?

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• images of 50 fps for export of 25 fps with a normal and slow speed

  Hello world!

  I use first since more than ten years, but now, for the first time that I have to deal with this situation. I have 1080 p at 50 fps 40Mbps images. My output images must be 25 fps 1080 p, but I need to have some video clips to a normal and some speed in slow motion. Any advise how to set my project and sequences? Should I do two sequences - one with 50 fps (for video clips that will be in slow motin) and the other with 25 frames per second and then nest 50 fps sequence in sequence of 25 frames per second for her (50 fps sequence) can be played back in slow motion? Or any other suggestions?

  Thank you!

  I duplicate the image in the project Panel, leave a version at 50 frames per second for use in sections of normal speed and interpret the other at 25 fps for use as slow Mo. use a sequence of 25 p.

• How to cut and paste ppt slides in presentations?

  How to cut and paste ppt slides in presentations?

  File > open

  and it should do the conversion for you.

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• My laptop is operating completely normally and would never shut down on its own. __But when I try to play a game or during the plauing sometime example pes 2010 or need for speed, my laptop some time Shut down.

  My laptop Qosmio F50 works completely normally and would never shut down on its own.
  But I try to play a game pes 2010 example or the need for speed, my laptop long closed.
  It was good before, but after rebotting my computer this problem just recently started...
  I have Nvidia Geforce, DirectX 10 and all recommended Requirments for the games but sometimes I start a game or after 2 or 3 housr game it would be completely Shut Down My computer and when I would turn on the computer, he would say that it was not Shut Down normally.

  Alhajji,
  They suggested to do a factory restore, if a valid step to do.  I know this isn't the most fun thing to do, but if you restore the system failing factory (clean install of the operating system).  Then, run Windows update and update drivers.  At this point, you can install a game and test.  If the problem persists, it would look to be a possible hardware problem with the system.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can someone change my WZC and the setting of security through the internet?

  can someone change my WZC and the setting of security through the internet? I was watching a video on youtube when my stop comp. and restarted on its own. start and my security program was not able to start, had to uninstall and reinstall to turn back. He told me has encountered a problem and that you must close the program and the program would not close. It comes in a loop. Security found nothing. WZC to capture multiple signals, but now I can't pick up a. right extremist to the modem.

  It seems that if you picked up some malware.  What is the full error message on "antimalware executable?

  I would like to cancel the restoration ago 2 months... it's really too long to rely on system restore.  Too many things have been added in the meantime who is affected negatively by the restoration.

  It is very difficult to say anything from the limited information you provided, but I suggest starting by download, install, update and run a full scan with MalwareBytes Anti-Malware.

  In your answer, in addition to providing the full text of the error messages, provide all of the following:

  What version of Windows, including service pack, do you have?
  What antivirus application do you use?  Is up to date? Have you ever let her subscription lapse?
  What other antimalware applications do you have?
  What is the brand and model of your computer?
  What is the brand and model of your wireless router?

• How to connect to xp without recovery disk? Horse Trojan and never set up an administrator account, need to recover important files

  Horse Trojan and never set up an administrator account, after the virus he set up a HP administrator with the password request and do not have a disk recovery or a xp disk to access files of important information. What should I do?

  Windows XP has a built-in Administrator account that cannot be deleted.  Log in as 'Administrator' and set up or fix your user account.  The following article describes how to do this:

  'Forgotten your Windows XP Home password? "- Part 3: define a new password as an administrator.
    <>http://support.Microsoft.com/kb/894902 >

  HTH,
  JW

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

  mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

  Hello

  1. your wireless mouse does not work?

   
  I suggest that you follow all the steps of the article which will help you solve the problem
   

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

• can I use freeFTPd as TFTP server to store routers and switches set?

  We use freeFTPd for saving the Voip, now you want to save all routers & switches the set, running this free program for them?

  If yes, can someone show me the exact CLI to copy start-config to it? I ran "copy start ftp"--> enter the server IP when you are prompted, got '$error opening ftp://x.x.x.x/file (undefined error) name. He asks me user name and password, is that I can't open the path?

  If not, should what program I use here? more details, pls

  THX.

  Regardless of the user name you used and password used is that the user name and password set on the server for freeFTPd?  Is there a configuration directory for this user?  You can send a screenshot of this freeFTPd?

  This user must have a base directory, you try to put he file in the users directory, or have you created another directory in the home directory and then try to put the file in there?

  Post a few screen shots of the freeFTPd software configuration espeically than the average user is configured.

• I can't resize the frame proportionally and object set and I can not drag and copy objects.

  Hello

  more than an hour on these problems:

  (1) I can't just drag and copy an object more

  (2) I can't resize an object and its setting selecting just. I can resize the frame only (not proportionally, however, doesn't matter the number of keys that I use!). Not the object it contains.

  I work with INDESIGN CC 2015 latest version (I've just updated) and on MAC OSX Yosemite 10.10.5

  I regret the money I spend each month to pay for these programs.
  Whenever I update them I have 1000 problems.

  I don't know even how to replace the preferences that I don't know what I should replace. And sorry if I sound stupid, but when you have to deal with a stupid task is what is happening. I refuse to understand.

  Honestly, this is such a stupid problem, and it should not exist on a first place. BAD BAD BAD ADOBE!

  Chiara

  Hello

  two days after, and a new update, it was back again.

  I think they were all preferences.

  @Rob: I used command-Shift and it always works when the black Selection tool is active. By selecting and dragging to create a copy of the object.

  It was just strange and frustrating.
  Thank you for your answer!
  Chiara

• Does anyone know html or css when I drag my magic mouse to the right there is my low site scroll vertically and when I slide to the left makes scrolling upward?

  Does anyone know html or css when I drag my magic mouse to the right there is my low site scroll vertically and when I slide to the left makes scrolling upward?

  As this Web site: our wedding

  Please check the options available here:

  http://resources.Muse.Adobe.com/search?q=swipe

  Thank you

  Sanjit