Regarding activation and the process of backup and restore in windows 7
First of all thanks a lot for the reply of my previous post about windows activation.
First of all thanks a lot for the reply of my previous post about windows activation.
I activated my copy of windows 7 Home premium system builder license successfully in my custom bench. I ordered an ssd drive and I want to install fresh in my ssd and avoid the cloning. Now my question is after installing windows SSD it will activate normally as it was for my hard drive (I used the online activation process). If this isn't the case, then what's the process?You will need to use the phone activation:How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us-------------------------------My next question is after the installation I want to create a file system image of my windows (in SSD) c partition to external hard drive for security. But currently, I have a lot of content in my HARD drive. So if I use windows system image backup option it will also create a backup of the rest of the partition so or I can choose only drive c (my ssd only)?You can choose only C:\ or several partitions.nozzles it will save a lot of space and during recovery, I can only restore C drive and leave intact records. Or I have to use a third party s/w for the recovery of the image?You can also use Easeus backup, but built into the imaging system should be enough.Please help me...Thanks in advance...
Tags: Windows
Similar Questions
-
Computer backup button does not appear in the "backup and Restore Center window.
Hello!
I've seen some computers that are running Windows Vista Edition home premium 32 y 64 Bits I can't do a "computer backup" in case I have to restore the computer from an Image made by this process because the "Computer backup" button is not in the "backup and Restore Center window.
As you can see in this link:
http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspxYou can see 4 buttons, I only see 2:
-Backup files
-Restore filesY at - it an update that makes these buttons appears in "Backup and Restore Center Window" or is the Version of Windows or of what it is. I find no answer yet.
Thanks for any help!
abasilisN °
You have the right version of Vista and there is NO update to change, but you can BUY a Vista Upgrade operating system...
http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx
Upgrade Home Prenium to ultimate.
http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx
Explore the features: Windows backup center and restoration
If you read this link, that it is said that you can NOT make a backup of the computer in Vista Home versions.
http://www.Acronis.com.au/homecomputing/products/TrueImage/
See you soon. Mick Murphy - Microsoft partner
-
How to exclude the missing files or library locations that are on a network backup and restore of Windows 7 Professional drive. To give you more information, I have photos stored on a network drive to the following address: Wirelessspace\LaCie\MyPhotoGallery\Family. This folder is a location of library under the images. Because this folder is on a network drive backup backup not file Wizard.
In addition, the following file locations is not found because they no longer exist. So why the backup wizard continues to look for and how to remove the backup set? I guess the error code following each line means simply that records cannot be found. Is this correct?
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Searches\Google file. Error: (the system cannot find the specified file. (0 x 80070002))
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\SyncUP file. Error: (the system cannot find the specified file. (0 x 80070002))
Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))Hello
I suggest you to follow the steps in the article below and check if it helps.
Error code 0 x 80070002 when you back up files in Windows 7: http://support.microsoft.com/kb/979281
Hope this information is useful.
-
Error in the process of backup and migration
Hello world
We buy a new server in our office. I want to migrate all virtual machines of old server ESXi to new ESXi server. I installed a Veeam Backup & Replication Free Edition to take backup of virtual machines or quick migrate between ESXi hosts. All the VMs were transferred successfully from the old server to new server, except 1 Server (TFS). I have an error in TFS server backup and transfer. When I want to transfer TFS or a backup of it, the error "the file < indeterminate finename > not found" occurs.
I turned off the VM TFS and started the backup procedure, but I got the same error. I tried to use another third called vmProtect Acronis backup tools. With this tool, I got the same error, but in the format clearly. The error is:
Task ' back to ' local folders "could not: ' cannot create a backup.
Additional information:
--------------------
Error code: 3
Module: 435
LineInfo: 555b5abba09501ce
Fields: $module: C:\Program Files\Acronis\vmProtect\Windows Agent\vmms.exe
Message: Failed to create a backup.
--------------------
Error code: 32786
Module: 114
LineInfo: 28314c961de7d32e
Fields:
Message: Could not establish for the backup.
--------------------
Error code: 353
Module: 149
LineInfo: a71592046cb2c5f6
Fields:
Message: Failed to save the group.
--------------------
Error code: 2
Module: 218
LineInfo: cd07f9d978d3a2a3
Fields:
Message: An error occurred during the backup and restore engine performance.
--------------------
Error code: 1080
Module: 1
LineInfo: d1ab7fa1e56ec832
Fields: $module: C:\Program Files\Fichiers Files\Acronis\vmProtectAgent\vmProtectService.exe
Message:
--------------------
Error code: 13
Module: 149
LineInfo: d1ab7fa1e56ec9b9
Fields:
Message: Cannot perform the requested operation.
--------------------
Error code: 103
Module: 83
LineInfo: a859dd78cc91defd
Fields:
Message: Could not open the machine virtual ([datastore1] TFS Server/TFS Server.vmx).
--------------------
Error code: 253
Module: 83
LineInfo: c7610e0a857bedf4
Fields:
Message: Error in VMware: "remote method call failed.".
--------------------
Error code: 32
Module: 0
LineInfo: c7610e0a857bedf4
Fields:
Message: Waiting for task 'CreateSnapshot' failed. Reason: File was not found.
--------------------'.
According to this error, create the Snapshot failed. I did the following task according to the Web of VMware KBs website:
1. in vSphere Client, off TFS VM and section\clicked of tab\General Settings\Options to change the Configuration settings. button
2. value of the disc. EnableUUID is set to True. I changed it to false.
But nothing has changed and the same error occurred.
According to an another KB:
1 uninstalled the VMware Tools TFS Vm and rebooted, reinstalled VMware Tools in the customized format.
2. in personalization, Volume Shadow Copy Service (VSS) Unchecked and reinstalled VMware Tools.
But nothing has changed and the same error occurred.
Screenshot of my data store is available in attachment.
Let me know if you have any useful recommendation to solve the problem.
Thank you all.
Hello
You can engage the snapshot using the VI client. Right-click on the virtual machine, and then click snapshot. Snapshot Manager.
-
EMail and SQLPLUS activity in the process flow
Hi guys,.
I am fighting for the work of the e-mail activity. I entered all the details, but no email is sent?
Secondly, I had a simple sql more script I pasted in the area of script property
But the sqlplus is not running?
truncate table xxx;
quit smoking
Any ideas?Hello
Can you give more details about your EMAIL activity?
For SQL activity.
Have you changed the properties of execution for the activity of SQLPlus from OFF to NATIVE_JAVA?On your database server, edit the following file
\owb\bin\admin\Runtime.properties
This file has the option to turn on your Shell script, FTP and SQLPlus activity through the workflow.property. RuntimePlatform.0.NativeExecution.FTP.security_constraint = NATIVE_JAVA
property. RuntimePlatform.0.NativeExecution.Shell.security_constraint = NATIVE_JAVA
property. RuntimePlatform.0.NativeExecution.SQLPlus.security_constraint = NATIVE_JAVAAfter that, you must restart the service of control center. Try again your activity more than SQL.
Thank you
Sam. -
"Backup and restore" in Windows 7 saves nothing, except the data files?
I want to save my 'Favorites' of internet list, messages stored in Live mail and my address book in Live mail. It seems that the "Backup and restore" function in Windows 7 saves only data files unless you choose the option of system image, and then it is not yet clear and seems to save much larger files that I could put on a DVD.
Can someone direct me to information on this topic or suggest a better method of simple backup.
By default, Windows 7 saving files in libraries and folders for all users. That includes everything in your user folder: data applications, contacts, desktop, downloads, Favorites, music, photos, documents, etc.. Windows Live Mail stores messages in the application data folder, so they are automatically backed up.
The system image contains everything on your computer.
Both types of backup can create more data that a DVD can hold. I recommend that you get an external drive for backups. Owner, Boulder computer Maven
Most Microsoft Valuable Professional -
I have a HP h9 - 1250t and can never use a blu ray disc tp save my work using the command from the windows Explorer which is strange since I use blu - ray disc in my dell xps 14, any help on this?
Hello edilbertojun,
Backup stores data in a compressed format on optical drives and blu - ray is an optical device device, I don't think you can use Windows built in backup and restore functionality.
You must use a backup solution 3rd party backup on the Blu - ray disc.
I may be wrong so that other members of the community can be better able to solve this problem.
Marilyn
-
OS-Windows 7 Home Edition
When I close Firefox 29 (just installed) the firefox.exe * 32 process remains active and I have to close the Task Manager.
Otherwise, when I try to run it again I get the message:
"Firefox is already running but is not responding do not." To open a new window, you must first close... »Not this problem with the previous version 28
Concerning
RiccardoMozilla publishes the 29.0.1 as a Firefox 29 update tomorrow to alleviate some of the most commonly reported problems here on the forum. You want to get this upgrade by going to
> Help > about Firefox and can be upgraded there.
-
Problem activation and again reinstall Windows 7 Pro help please!
I don't have an activation link when I right click on computer-properties... I'm trying to enter my activation code. A window appears and says to activate it. Where can I activate my new reinstall of windows 7 pro?
1 million thanks (you're always this GREAT help)How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxRegister Windows 7
http://Windows.Microsoft.com/en-us/Windows7/help/register
Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
filled with tips, creative tips and other information to you help get the most out of Windows 7.
You also get a subscription to the monthly newsletter of Windows Explorer,
where you will find other tips and tricks, as well as special offers.Learn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
Registry backup and restore in Windows Vista
Original title - backup and restore
I need to get these procedures to back up and restore the registry in Windows Vista
http://www.Vistax64.com/tutorials/212412-registry-backup-restore.html
How to back up and restore the Vista registry
See you soon.
Mick Murphy - Microsoft partner
-
Original title: clicking on but nothing happens
When I select "backup and Restore Center', 'System', 'Windows Update', 'Power Options' and a few others in Control Panel, nothing happens. Sometimes a window flashes for a split second before disappearing. Any suggestions?
Hi Ron68PB,
1. you remember to make changes to the computer before this problem?
2 are you able to open other programs?
3. do you get error messages or error codes?
Method 1:
You try to run a SFC scan to check the corrupted system files.
You can read the following article to launch the SFC scan:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
Alternatively, you can try to check if the problem occurs in safe mode.
Check out the link:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
-
Backup and restore in Windows 7 will not make an incremental backup
Hello.
I have about 400 GB of backup files, for most audio (I have a home studio). Backup and restoration continues to do a new backup full instead of an incremental backup. I tried to disable "Windows Media Sharing whatever" and has no effect. I found the registry entry that the so-called forces a backup under certain circumstances, if I understand correctly. I put the value '0' and he still makes no difference - copy Windows files that I know have not changed over the YEARS and to create a new full backup. My current full backup is December 2014 on a 1 TB external hard drive. It is the backup that I added to-probably on a maximum of 20 additional concerts.
This is important because in 400 concerts, I have neither the time nor the space to do a full backup every time. I searched these forums and around the web and found nothing more disable sharing of Windows Media Services. For now I'm reduced to manually copy the new audio files on a backup drive, which is heavy at least when dealing with the whims of my Audio sequencer for recording methods and organization of files.
Please let me know how I can make an incremental backup instead of a full backup of my hard drive. Thanks for your help.
GWR
IMHO, I wouldn't play with the built-in backup. It is, at best, kludgy, depends on the OS partition, is inflexible and not easy to use.
IMHO, I would not trust my data or spend my time on it.
I'd take a peek at st Acronis True image home 2015.
-
(Redirected) Backup and restore with Windows 10 could not be updated
I received a message that I had to update Dell backup and restoration since I was in my first month trying Windows 10. Started the update, got about 1 - 1 1/2 minutes, then got an error message.
Patch file failed:
C:\Program Files (x 86) \Dell Backup and Recovery\QTtool Lite.exeClicked OK, light timer counts down, but the progress bar would move not to give the impression, that he had won as a result of the above error so I stopped it. What is happening to others?
Best of this post in the forum Windows 10 here:
http://en.community.Dell.com/support-forums/software-OS/f/4997
Bev.
-
How to backup and restore of Windows medial Player library?
I rebuilt a WMP library several times due to changes in operating systems, accidents, etc. Re-creation of playlists and of reloading the files of music becomes tedious. I know that you can have just the library automatically fill up again, but I did a lot of changes to customize the library and I would like to save the library and restore it if necessary. Is it possible to do? I'd appreciate any help in this area.
You can try to use a Windows backup and backup the file/database library.
-
* - Title original - Win 7: incrementing previous backup and restore
Last week, I did a "backup and recovery" on my Win 7 64 bit computer, create a folder WindowsImageBackup 118 GB on an external HARD drive.
I like incremental backup the same material on a base weekly, I tried to do the first incremental backup this morning.However, my "Backup and Restore" menu control configuration\systeme and securite\ tells me that "Windows backup was not put in place" and that "Windows cannot find a backup for this computer", even if the external HARD disk is attached and recognized.How can I set B R & to realize progressively the same backup that I did last week? I don't want the schedule to run regularly, but will do it manually.Thank youColinHello
Did recent changes to the computer?
I suggest you to refer to these articles and check if they can help you.
What backup settings should I use to maximize my disk space? : http://windows.microsoft.com/en-NZ/windows7/What-backup-settings-should-I-use-to-maximize-my-disk-space
Backup and restore: frequently asked questions: http://windows.microsoft.com/en-us/windows7/back-up-and-restore-frequently-asked-questions
For more information:
Windows backup does not an incremental backup media when the Windows Media Player Network Sharing Service is enabled in Windows 7: http://support.microsoft.com/kb/981470
I hope this helps.
Maybe you are looking for
-
Satellite A300-1J1 - WLAN is not working after installing XP
Hello I installed XP on my PC, but now I can not install the driver for my Wireless.I have install all of them, but always my wireless card does not. Are there any ideas including a driver I need - Realtec, Atheros and Intel?
-
Qosmio G30: I can't find the Linux for the Bluetooth and TV Tuner drivers
I have the Qosmio Q30 HD-DVD (PQG32) on Ubuntu Linux. My problem is that I can't find drivers for Bluetooth and TV Tuner. Toshiba supports Linux? If so when I find it?
-
read an image of an mpeg video
I have need to progammatically read a frame of an mpeg video. I already tried to make use of ffmpeg and convert the sequence video in a png (or other), but now I would develop a more powerful solution. Do you have anyone try or need something similar
-
Several producers an consumers
Hello, I am developing an application where they are drawn at different speeds and different processes, but I want to store it in a file, to store this data I can, if I have several producers and a consumer?
-
Web OS 1.0.3? No more swish sound throw apps?
What happened to this "swish" when you throw maps apps when you're done?