EMail and SQLPLUS activity in the process flow

Similar Questions

• Enter the date of transformation in the process flow

  Hello
  
  I have a transformation (stored procedure) in a process flow that requires that two input variables. If I execute this stored procedure directly from the database I would use:
  
  Start
  package_name. Procedure_name (to_date ('20100101', 'YYYYMMDD'), to_date ('20100102', 'YYYYMMDD'));
  end;
  /
  
  The problem in the process flow, it's that I'm not able to give the input parameters for the transformation in the correct manner. The process flow is valid, but when I run the workflow process I get ORA-01830 and PRE-02241. What I have in the process flow is:
  
  START-> procedure_name--> END
  
  I also tried with:
  
  START-> ASSIGN--> procedure_name--> END
  
  Someone would ask me how do I pass two input parameters for the transformation are the type of date (format: YYYYMMDD)?
  
  Thank you
  
  Andreas

  Hi Andreas,

  5472814 UNABLE TO PASS DATE PARAMETERS WITH THE HELP OF RUN_TASK OR SQLPLUS_EXEC_TEMPLATE

  No, it has different bug for your problem. Now I can not find this bug on Metalink...

  Look at this thread (read the last message in the user philip_b)
  Re: Passing Date value to the parameter mapping entry

  This is the same problem and the same OWB version

  I hope this helps!

• Outlook Express cannot send and receive emails and cannot sync to the phone.

  Hello

  I'm a Microsoft Online Customer Service, which contacts on behalf of my client. My client has problem with Outlook Express, which cannot send and receive emails, and cannot sync to the phone. He receives this error message below:

  The host 'SMTP' could not be found. Please check that you have entered the server name correctly. Account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  I'm not sure of the sync with the phone number, but the account settings are not yet near. SMTP is not a host name or a server name. You must find the correct POP3 server settings.

  Setting up email in Outlook Express servers
  http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx

• How to know the status of the process flow using a SQL query

  Hello
  I want to know the final status of a process flow after execution by using a sql query?
  
  The available entries are:
  -Item_Key
  -Process_Flow_Package_Name
  -Process_Flow_Name
  
  I ran the process flow using a WF_Engine.LaunchProcess ()procedure, but I was not able to know the status of the process flow.
  
  
  Is it possible to know the status of the process flow?
  
  using a procedure or an sql query?
  
  Thanks in advance,
  SriGP.

  Once the process is completed, or not, you can see the status by calling:

  UAS (your_OWF_shema) .wf_engine. ItemStatus()

• Account that a single email can be activated at the same time?

  Hello

  I have two e-mail accounts on the Mail for some time (virginmedia.com and outlook.com). Today, for some reason any Mail keeps asking for the password of the email blank and does not seem to recognize the password (which works fine if I connect on the Virgin account from the internet). Then also the following error message appears "only an e-mail account can be activated at the same time. «The «[email protected] e-mail account activation will disable "... @outlook.com" on this Mas.» How can I solve this?

  Thank you

  10.11.5 OS / iMac (mid-2010)

  You will need at least one of the accounts remove and recreate it in the Internet accounts preferences panel. You can do this without losing all the messages, provided that the account is IMAP or Exchange, and if you store sent messages on the server. Back up all data before making any changes.

• compaction of disk space is removing the last 6 months of emails and put them in the trash. He has never done this before.

  When I compact my disk space, it deletes all previous 6 months emails in the trash. He's never done this before and has since a few months I do not more. all compact space solutions without losing everything?

  Compaction doesn't send your mail in the trash. Those are backup files in case something like this happens.

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.

  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  About file Corruption:
  http://www.Microsoft.com/Windows/IE/community/columns/filecorruption.mspx

  Recovery methods:

  If you use XP/SP2 or SP3, and are fully patched, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.

  To restore a folder bak on the message store folder, first find the location of the message store.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.

  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.

  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.

  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.

  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.

  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:

  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx

  And see:
  http://www.oehelp.com/OETips.aspx#4

  A general warning to help avoid this in the future:

  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Tecra 8100 - does not start and no activity on the screen

  Hello

  My Tecra 8100 not start or take me to the BIOS Setup. It lights up, swirls the hard drive, but there is no activity on the display. The only way I can get something on the screen is turning with the F12 key when I get the 'ready for the update of the BIOS. Place the BIOS update diskette in the drive "... message. So I tried the traditional method of updating the BIOS, found on the Toshiba site, but nothing helped. The machine seems to read the disk (that contains the downloaded BIOS) but does nothing. It is just there for centuries, with the disk light.

  The last two days I have trawled thro much views and even took the whole machine goes to check the connections loose, but I found no answer yet.

  Can someone out there please help?

  Thank you very much

  Hello Rory

  I did the BIOS to be updated several times, but I've never seen this message at startup upward. You did it the traditional method as described in the document which you will find under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07?

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

  I have a tab page where I got 3 different reports REPORT_A (classic), REPORT_B (interactive) and REPORT_C (CLASSIC) in alphabetical order. I have a page to reset pagination process that will always draw (without condition) when you visit the page with the tab.

  
  Reset pagination process that exists in the front scene of the header is set to fire but not to reset the interactive report. It affects the subsequent classic report REPORT_C as well. The REPORT_A would be reset paging very well since it exists before the interactive report. Is this a bug in apex?

  I created an application of demonstration of test with specific steps to reproduce the problem. The steps are on the demo site itself.

  http://Apex.Oracle.com/pls/Apex/f?p=56638
  SUP: testuser
  P: password

  Apex Version: 4.2.4.00.08

  In my real application I wish a dropdownlist control on the page based on which I would like to filter the data. The dropdownlist control will have a corresponding branch of after-submit who will absolutely perfect pagination to reset & RIR. But when we visit Web site by tab the above problem would break the page.

  I tried the solutions like gReport.search ('SEARCH') but that will only set the interactive report, not the classic REPORT_C. It's just a hack anyway.

  Any ideas. ?

  Hello

  Create before that the process header on page 12 that calls APEX_UTIL. IR_RESET

  Kind regards
  Jari

• On the process flow

  Hi all
  
  Is it possible to call a procedure on a package via a process flow module?
  
  thkx

  Yes

  Directly drag it from the Explorer where the function or procedure.

  See you soon
  Katia

• X 1 carbon (3443CTO) startup white screen and no activity after the ACHI BIOS compatibility

  Hello world

  I have a X 1 3443CTO of carbon and it works well.

  Last night, everything was ok and I went into the BIOS and changed compatibility AHCI (don't ask me why, I was doing some tests), then I went "exit and save changes" (on the last page of the BIOS). As soon as I press the screen freezes y enter (as opposed to restart)

  Because that's where I hold the power button and it stop.

  Then I turn it on again, but now, here's the problem:

  (1) the computer turns on, keyboard backlight flash on a second (normal)

  (2) screen remains blank (no, it isn't the defective backlight)

  (3) power light starts up (normal)

  (4) no sign of activities no button, no beep

  I don't know what the problem is, but he believes it is due to the BIOS setting I did that caused the problem. Someone please help me solve this problem (urgent)?

  Thank you very much!!!

  John

  If it's your last day of the guarantee, then it is better to do it through warranty repair.

• File, edit and help menus in the process of disappearance

  When starting Adobe Reader 10.1.4 everything looks normal as shown below.

  http://i.imgur.com/ucLKz.PNG

  After about 2 to 4 seconds the file, editing and help menus disappear suddenly, looking like that.

  http://i.imgur.com/t3LRo.PNG

  This occurs for each open PDF and happens even if the player is opened by itself without a PDF file. I tried uninstalling and reinstalling but the problem persists. The Help menu is usable long barely enough to perform a repair installation, but it does not help. F9 do not bring them back. The system is Windows 7 64-bit. Any ideas on how to solve this problem?

  Check the JavaScript file to see if you the other files that the *. BIN file.  If you do, then move the extras out of the JavaScripts folder and restart Adobe Reader.

• When 29 of Firefox is closed, it remains active in the process even if there are any open windows. So I have to use the application management processes.

  OS-Windows 7 Home Edition
  When I close Firefox 29 (just installed) the firefox.exe * 32 process remains active and I have to close the Task Manager.
  Otherwise, when I try to run it again I get the message:
  "Firefox is already running but is not responding do not." To open a new window, you must first close... »

  Not this problem with the previous version 28

  Concerning
  Riccardo

  Mozilla publishes the 29.0.1 as a Firefox 29 update tomorrow to alleviate some of the most commonly reported problems here on the forum. You want to get this upgrade by going to

  

  > Help > about Firefox and can be upgraded there.

• My email and Forum Microsoft have the same password and change the other!

  I recently spent the e-mail providers. I use a Hotmail e-mail based under its name and nothing else than problems, had nearly three times a week that something happens again. Three days ago, I tried to connect to the Microsoft Forums. It does not accept my password, so I created a new. Later, I tried to download my e-mail, the password was not accepted. An hour or later with the help of Technical Support of my email provider, I have returned my original password which was accepted.  Later or the next day I wanted access to the Forum of MSFT, but yet again, the password was rejected. I entered the email password and voila, it opened. I now have my e-mail, Forums of MSFT and Windows Live all with the same password. I use Office 2007 and Windows XP Pro. I'm afraid that this many programs with my word of one happening is very dangerous and fear the worst. I use Outlook as my e-mail program

  Can someone help me please here: will I pass to my previous email provider?   E-mail providers out there among the greatest how use a Hotmail based email service or Internet? are they the same? Thank you very much for your help! HDScala

  There are services out there e-mail providers that do not rely on Hotmail?

  A lot.  The Yahoo and Google offer free e-mail services.  Others exist as well. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.