Regarding on the Windows Recovery

Similar Questions

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• Re: How to access the Windows Recovery Console?

  How can I access the Windows Recovery Console. The State of KBs Microsoft it may be accessessed to start with the DVD of the OS. However, you provide OS DVD only Toshiba recovery disks. When I boot them it gives only the option to erase all data and restore the original state.

  I have a Toshiba Qosmio F10 running Windows 7 32 bit.

  The reason why I need the recovery console is due to a breakdown of chkdsk which results now it running whenever I start up and hanging each time. Other Articals MS say I can get out of this infinite loop by using the Windows Recovery Console.

  > I have a Toshiba Qosmio F10 Windows 7 32 bit.
  Are you sure you have Qosmio F10?

• The Internet is not accessible after the Windows Recovery virus eliminated

  Original title: Recovery Windows Virus eliminated but now no internet... what the

  I got the Windows Recovery virus and my son has deleted successfully and that he found all the files and I have the office back.  I can connect to the internet if I use another laptop but I can't connect using the infected computer.  I have contacted my provider, but they can help as I have connection so there is no problem.  I'm currently on a laptop, attached to my modem, so I know it's working.  When I use my computer and try to connect it comes up saying "Internet explorer cannot display the webpage".  There is an option to diagnose connection problems, but it does not work for me because I have a connection.  Y at - it is something I need to fix on my original computer to allow the signal through it to say: a registry or something.

  If you see stuff like this (after got rid of the malware):

  Internet Explorer cannot display this webpage
     
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and
  the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  Most home page
  systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the
  parameters of the system that is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings
  automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If that is fixed, follow these steps:

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties. In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties. Advanced. There should be a tab DNS. Please make sure that the following options are selected:

  Dash in add primary and connection specific dns suffixes and an add parents of the primary dns suffix suffixes and also a check tick to save these connections addresses in DNS.

  On the check tab VICTORIES which allow you to search LMHOSTS is checked and use the default setting for netbios. Now OK out of all these windows. If you have changed a
  These settings please let us know.

• Satellite C850-B734 - need to know how to go about the windows recovery

  I have a SATELLITE C850-B734

  I have some problems with my laptop recently and need to reinstall windows

  with my laptop brief, I was able to go into recovery mode where I can reinstall windows or repair only and it take me for an Assistant where I can change my reader sive and numbers etc...
  Inorder to access this wizard I had to Press f4 key at startup of device but tried with my toshiba satalite c850 I do not think the wizard

  for your information I have windows 8.1 and have all my HARD drive in one partition and want to add more partitions when I reinstall windows
  I looked in the settings to find that I can reinstall windows, but seems this isn't a recovery... because all the drivers and toshiba applications will be lost in the process and the Assistant told me that I have to manually reinstall if I have CDs for them that I don't have and don't want to go to the online search for drivers and stuff like that There must be an Assistant where I can reinstall windows and drivers for my device without much effort

  help will be appreciated... thx

  If you have not created some recovery discs/media in the past and that recovery of HARD drive option (link posted by Liam) does not work, then you have no other options except for the command the drive recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Recently lost data because of the "Windows Recovery" XP virus

  Greetings,
  I have recently all my data because of the virus: "Windows Recovery. When I go to start, programs. everything is gone, also no photos, videos or music. I tried to restore the system to a different date, but it won't let me.  Moreover, the basket is empty. I removed the virus using "Malwarebytes... but impossible to recover the files. Please, any advice >
  Eric

  Hi Tropicguy,

  Like JoseIbarra said, it could be that the virus has caused your folders/files/programs show hidden.  I suggest checking to see if they are there, after doing the following:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/WIN_FCAB_SHOW_FILE_EXTENSIONS.mspx?mfr=true

  I hope this helps!

• Replacement motherboard made me the Windows recovery error

  The motherboard in my Gateway DX4710-05 gone bad and I replaced it with exactly the same as it was before (http://www.skyline-eng.com/index.cfm?fuseaction=product.display&product_ID=6835) when I turn on the PC it crosses the gateway logo screen when it gets to the Vista loading screen, it says that there is second environ.5 and then goes to the error screen recover Windows.  I have the option start windows normally or start the startup recovery. When I run the startup recovery it is said that it cannot correct errors automatically.  Here are some results of tests, I ran.

  Signature of the problem:
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  03:6 problem signature
  Signature of the 04:524296 problem
  Signature of the problem 05: NoRootCause
  Signature of the 06 problem: NoRootCause
  Signature of the problem 07:0
  Signature of issue 08: 1
  Signature of the problem 09: SystemRestore
  Signature of the problem 10:0
  OS version: 6.0.6000.2.0.0.256.1
  Locale ID: 1033

  Unspecified system configuration changes may have caused the problem.

  Help me please!  I really want to re - install windows.

  Thank you

  Travis

  http://support.gateway.com/support/default.aspx

  You will need to contact the gateway to this topic.

  You say EXACTLY same motherboard.

  Something is not, and the Vista of the existing bridge installation contains the drivers for the hardware of the old motherboard.

  See you soon.

  Mick Murphy - Microsoft partner

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• lost user account after using the windows recovery disk.

  Help, please. I turned on my computer and found that windows vista could not start due to a currupt file.

  I have tried rebooting several times without success and ended by using the samsung recovery disc to get windows vista to work.

  I had to create a new user account and have been able to find my original account on the C drive but don't know how to restore it so I don't have start with a new account from scratch.

  Any help is appreciated.

  Information, the original version of windows is now called windows.old and it is here that I want to use the user account.

  Hi Geek teenager,

  Surly there is a way to restore the user account that is sitting in windows.old on the C: drive, instead of having to reinstall all the programs that I never downloaded?

  Programs need to be reinstalled from the original media: CD, DVD, download, etc.

  You can recover data from the windows.old folder, but not programs.

  Set up a new account.

  http://support.Microsoft.com/kb/933209

  How to recover files from an earlier version of Windows in Windows Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Insert the Windows recovery or installation media to continue - Windows 8

  I tried to reset my Windows 8 Asus SonicMaster S300c for a few days. It was installed with a Windows 8 operating system and had been upgraded to Windows 8. 1. I tried to use the update, reset and various other techniques found on the web that offers workarounds for this situation.

  Having none of them does not work for me, I created an image of USB flash drive recovery, entered the box boot UEFI and loaded the prompt orders and formatted the disk C: (OS disk).  I do not touch or change hidden partitions.

  However, now that I'm booting from the disc Sandisk UEFI (my USB key), I get to the window 'Reset your PC' where he tells me to "insert the installer or Windows recovery media to continue.  Of course, I have my recovery media inserted, the system can choose from two places, the hidden or the USB drive.

  I tried to restore the USB key and the hidden partition and none worked.  What can I do to retrieve Windows 8/8.1 on my computer.  (And it is possible to install Windows 10 on this laptop?)

  I finally solve my problem.  I had to use a combination of various pages and links and articles help to help me sort.  Ranging from the Dism to using CDBurnerXP and RUFUS DiskPart.

  I wrote my experience with, hopefully sufficient instructions for a person to get there installed system.

  http://www.eightforums.com/installation-setup/72015-Windows-8-installation-various-errors.html#post529594

• No operating system on the Windows recovery disc

  I'm trying to troubleshoot an Unmountable_Boot_Volume error that crashes my computer while booting.

  When I boot from the Windows installation CD and select 'Repair', I am prompted to select the operating system, I want to fix it. However, no operating system are listed.

  The hard drive with Vista on it is recognized in the BIOS and is connected to the computer through SATA.

  Any help would be appreciated.

  Thank you

  A.J.

  Disconnect your SATA drive, re - connect. Make sure that the connection is all set up correctly.

  If possible, connect the SATA drive to another PC (only if possible) and check for the presence of the IDF.

  Then run the Startup Repair.

  Also consider a check disk running.

  Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.

• Having difficulty to remove the Windows Recovery Console

  I followed the instructions on how to do it, but the cmdcons folder could not be deleted. Some files are in use? I installed the recovery yesterday with "Combo Fix" console after having a suspected virus. I wish to remove the console now but could not get the deleted file.

  I followed the instructions on how to do it, but the cmdcons folder could not be deleted. Some files are in use? I installed the recovery yesterday with "Combo Fix" console after having a suspected virus. I wish to remove the console now but could not get the deleted file.

  I recommend that you do not delete it. Recovery Console can be very helpful in situations where you have errors in the file. It works essentially as a back-up allows to replace the files and fix some errors. You can change the amount of time boot options at startup, which speeds up the overall starting your computer. I have mine at 5 seconds. I know what I want to do before I turn on the computer and therefore do not need the options for the default value of 30 seconds.

  I know there are a lot of forums tech that allows you to install Combo instruct. Personally I would never put that on my computer. I've seen too many problems to evolve from it in the past.

  Kind regards

  Joel

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• With regard to the Creat recovery media

  P.Name: HP pavilion dm4-3050us Entertainment PC

  OS Win 7 Home premium 64-bit

  My problem is:

  I bought a brand new HP, the name is over the top, and when I went to restore media (4 CD DVD)

  I've done disc 1 and the next full recovery of the disk (2) data, but the action that has controlled is not complete after that

  I'm dealing with this Message (try again) and when I insert a new disk it will start recovery disc 2 because it is incomplete

  Hope helps

  I've never done any changes befor this action

  The quality of recordable media may just need to be moved up a notch. Here's a pretty good classified by quality DVD media list.

• Message in the Windows Recovery Console

  When I get on the C driveI fixmbr will get the message "computer seems to have a MBR atypical or invalid.»
  Fix MBR can damage your partition tables if you proceed. This could cause all partitions on the current hard disk to become inaccessible. I ran fixboot, but this message persists with fixmbr. I had a nasty malware attack and analyses and fixboot seemed to help but this still happens. Is there a danger here? PC does not start correctly. Under XP Home HP desktop computer.

  Hi Walter Hardison,.
   
  -The fixmbr command works correctly?
   
  The fixmbr command causes this error message to display on your computer every time that you run the command, regardless of the State of the Master Boot Record (MBR).

  After running the command fixmbr , your computer displays or not the command worked properly. If the command was successful, your computer displays the following message:

   
  New to writing on the physical disk's master boot record
  \Device\Harddisk0\Partition0.
  The new master boot record has been written successfully.
   
  If you receive this message, you can ignore the error message you mentioned.

• Bootcamp error: "the startup disk cannot be partitioned or restored to a single partition" and Windows recovery partitions

  I have Setup with Bootcamp Windows 8 and then upgrade to Windows 8.1, and then upgrade to Windows 10.

  When I want to restart the training camp that I got the error message: "the startup disk cannot be partitioned or restored to a single partition.

  According to this page, it is because of Windows recovery partitions added during the 8 to 8.1 migration and 8.1 to 10.

  I check with diskutil and I found 2 partitions of Windows Recovery:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 419,4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 79.1 GB disk0s4

  5: Windows Recovery 471.9 MB disk0s5

  6: Windows Recovery 472,9 MB disk0s6

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 419,0 disk1

  Logical volume on disk0s2

  C961E459-1E0D-4060-A467-3B4A705264AA

  Unencrypted

  I tried to delete the Windows Recovery 2 partitions with disk utility tools but the button "-" to remove them were leaving is disabled.

  Is it a good idea to remove these partitions? If yes how?

  1. What is the year/model of your Mac?

  2. you are trying to install a new copy of the W10 or remove the existing installation?

  3. do you have the W8 or installation/upgrade W8.1 had problems before the upgrade of the W10?