Replacement motherboard made me the Windows recovery error

Similar Questions

• Recovery disks won't be finished reinstalling attract the Windows recovery error

  I have a HP pc only to return some malware a few weeks. Tried to remove it and restart got the Startup Repair. Who ran, but received a message that the problem could not be resolved automatically. Tried several times but without success.

  Then I tried the system restore, which seemed to work. It should restart the process and I got a screen that says Windows Recovery error. Gave me a few options but also safe mode start Windows normally. If so start normally, just screen becomes black and hangs there. I tried in safe mode, a list of drivers starts, then stops at crcdisk.sys and I get a box that says that I can't get into safe mode because Windows has not finished the installation.

  Then I tried the HP recovery disks to restore the factory settings. Crossed reinstall it without problems and clicked on Finish to reboot and continue. It goes through the process some, restarts a few times and the final reboot immediately comes the same Windows error recovery screen. I tried several times and made sure the only cool things are the monitor, the keyboard, the mouse and the cord. I also tried to remove one of the memory two sticks and the sound card that is not the original. Memory sticks are original.

  I thought it was the failure of hard drive and bought a new one last nite and was installed. Ran the recovery disks appeared once again, as he worked but got the same error Windows Recovery screen after a reboot.

  Any ideas of what I can do? I can't go in safe mode at all.

  Thank you!

  Edit - I forgot to mention that I have managed to get into the manufacturers menu and delete the original hard drive and tried to do the reinstall, but got the same error.

  Fixed it got! Found the answer in another thread here. It's a problem witht Nvidia Geforce card I have and the DVI output. Think an update or something hit malware but all I had to do was remove the video card, plug a VGA instead of DVI cable and I was able to complete reinstall it! Everything works except the sound now. Trying to get that fixed and reinstall the video card later today.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Internet is not accessible after the Windows Recovery virus eliminated

  Original title: Recovery Windows Virus eliminated but now no internet... what the

  I got the Windows Recovery virus and my son has deleted successfully and that he found all the files and I have the office back.  I can connect to the internet if I use another laptop but I can't connect using the infected computer.  I have contacted my provider, but they can help as I have connection so there is no problem.  I'm currently on a laptop, attached to my modem, so I know it's working.  When I use my computer and try to connect it comes up saying "Internet explorer cannot display the webpage".  There is an option to diagnose connection problems, but it does not work for me because I have a connection.  Y at - it is something I need to fix on my original computer to allow the signal through it to say: a registry or something.

  If you see stuff like this (after got rid of the malware):

  Internet Explorer cannot display this webpage
     
  The most likely causes:
  You are not connected to the Internet.
  The Web site encounters problems.
  There could be a typing error in the address.

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
   
  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and
  the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  Most home page
  systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the
  parameters of the system that is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings
  automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If that is fixed, follow these steps:

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties. In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties. Advanced. There should be a tab DNS. Please make sure that the following options are selected:

  Dash in add primary and connection specific dns suffixes and an add parents of the primary dns suffix suffixes and also a check tick to save these connections addresses in DNS.

  On the check tab VICTORIES which allow you to search LMHOSTS is checked and use the default setting for netbios. Now OK out of all these windows. If you have changed a
  These settings please let us know.

• How do I start the Windows recovery environment (WinRE)?

  Hello

  I have PLUA1E Satellite Pro U200 - 02802QS with Vista Business 32 - bit and the WinRE partition.
  How do I start the Windows recovery environment (WinRE)?
  I mean what key should I press during the boot process for Windows re menu?

  In my Satellite Pro A300, the F8 key during startup will run the recovery of HARD drive partition.

  Hope it's the same on your.

  Or do you possibly mean the recovery of Vista Business environment. Accessible through the Control Panel, system image recovery?

  / Torbjörn

  Post edited by: ssstsg

• Re: How to access the Windows Recovery Console?

  How can I access the Windows Recovery Console. The State of KBs Microsoft it may be accessessed to start with the DVD of the OS. However, you provide OS DVD only Toshiba recovery disks. When I boot them it gives only the option to erase all data and restore the original state.

  I have a Toshiba Qosmio F10 running Windows 7 32 bit.

  The reason why I need the recovery console is due to a breakdown of chkdsk which results now it running whenever I start up and hanging each time. Other Articals MS say I can get out of this infinite loop by using the Windows Recovery Console.

  > I have a Toshiba Qosmio F10 Windows 7 32 bit.
  Are you sure you have Qosmio F10?

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  I get the Windows 0xc0000135 error when opening new tabs in Google Chrome. Help!

  It gets really annoying. The very first 2 or 3 times I opened a new tab, I get this error message and
  I have to close and open a new one until I get a tab that works. Anyone who can help is greatly appreciated.
  -Eric

  Hi EricKelso,

  The question you have posted is related to Google Chrome and would be better suited to the community of Google chrome. Please visit the link below to find a community that will support what ask you
  http://www.Google.com/support/forum/p/chrome

• Replaced motherboard on HP PC Windows Vista Home Premium (32 bit)

  On a HP Pavilion Media Center m8226x desktop PC is running OEM Windows Vista Home Premium (32 bit) version.  Replacing motherboard ASUS M2N68 - motherboard HP Narra2-GL8E 6150SE with a card mother MCP61PM-HM (Nettle2) due to the failure.  The two boards have same chipset and form factor.  Can I just replace the Board of Directors without having to reinstall windows?  Do I need to install new drivers?  I do not have a CD installation or installation key, Microsoft would provide a key if necessary?  Is there a link I can reference for replacement MB / install?

  Thanks for you help!

  HC

  You pay with the exchange for motherboards.

  1. you normally have to reinstall the OS after changing motherboards (different drivers)

  2 Microsoft won't provide a new product key.

  3. you can try explainging what you do.

  4. 'How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows recovery error, does not start in windows 7

  Description of the problem:

  "Windows error recovery" appears during the implementation with 2 options-

  (1) starting repair (recommended)

  (2) start Windows normally

  I can't access my desktop.

  • If I choose 'Launch Startup Repair', it goes to the screen next where I see "Windows is loading files...". ». He never goes beyond this screen.
  • If I choose 'Start normally', I never go beyond "starting Windows."

  I ran the diagnostics (Pre Boot system assessment build 4118) and got far: hard drive 0 - self test unsuccessful. Error code 2000-0142 status 79

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Insert the Windows recovery or installation media to continue - Windows 8

  I tried to reset my Windows 8 Asus SonicMaster S300c for a few days. It was installed with a Windows 8 operating system and had been upgraded to Windows 8. 1. I tried to use the update, reset and various other techniques found on the web that offers workarounds for this situation.

  Having none of them does not work for me, I created an image of USB flash drive recovery, entered the box boot UEFI and loaded the prompt orders and formatted the disk C: (OS disk).  I do not touch or change hidden partitions.

  However, now that I'm booting from the disc Sandisk UEFI (my USB key), I get to the window 'Reset your PC' where he tells me to "insert the installer or Windows recovery media to continue.  Of course, I have my recovery media inserted, the system can choose from two places, the hidden or the USB drive.

  I tried to restore the USB key and the hidden partition and none worked.  What can I do to retrieve Windows 8/8.1 on my computer.  (And it is possible to install Windows 10 on this laptop?)

  I finally solve my problem.  I had to use a combination of various pages and links and articles help to help me sort.  Ranging from the Dism to using CDBurnerXP and RUFUS DiskPart.

  I wrote my experience with, hopefully sufficient instructions for a person to get there installed system.

  http://www.eightforums.com/installation-setup/72015-Windows-8-installation-various-errors.html#post529594

• Satellite C850-B734 - need to know how to go about the windows recovery

  I have a SATELLITE C850-B734

  I have some problems with my laptop recently and need to reinstall windows

  with my laptop brief, I was able to go into recovery mode where I can reinstall windows or repair only and it take me for an Assistant where I can change my reader sive and numbers etc...
  Inorder to access this wizard I had to Press f4 key at startup of device but tried with my toshiba satalite c850 I do not think the wizard

  for your information I have windows 8.1 and have all my HARD drive in one partition and want to add more partitions when I reinstall windows
  I looked in the settings to find that I can reinstall windows, but seems this isn't a recovery... because all the drivers and toshiba applications will be lost in the process and the Assistant told me that I have to manually reinstall if I have CDs for them that I don't have and don't want to go to the online search for drivers and stuff like that There must be an Assistant where I can reinstall windows and drivers for my device without much effort

  help will be appreciated... thx

  If you have not created some recovery discs/media in the past and that recovery of HARD drive option (link posted by Liam) does not work, then you have no other options except for the command the drive recovery from here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Replacement motherboard broken after the expiration of the warranty.

  Hi, I'm going to buy a T450s next week and I'll buy a warranty 2 year Onsite & accidental.

  I wonder what it would take to replace a motherboard, after the expiration of the warranty. The reason why I bring

  in question is that a key is required to replace a motherboard and update the news cards mothers series etc..

  I did some research and the best way to save and restore this information is to connect directly to the eeprom

  and manually read/write, it...

• does anyone know how to fix the window with error code 80080005 updates

  can someone tell me where to go to get what I need to fix it is error 80080005

  Windows operating system?

  Windows XP perhaps-

  You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site
  http://support.Microsoft.com/kb/910337
  Windows could not start the service on the local computer's Background Intelligent Transfer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service particular-2147467243 error code. (0 x 80080005)
  error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then clickOK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and clickOK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  Or Maybe Vista:

  0 x 80080005 implies that Microsoft Installer is not configured correctly or it may have malfunctioned.

  Run the Startup Repair tool by using the Windows Vista installation disc

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to fix Windows Vista using Startup Repair automatically
  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Startup Repair frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Maybe Windows 7 .
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.