Registration form of timesheet that auto-remplit the date ranges?

Similar Questions

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.

• On the date ranges in search of oracle forms

  I use service number, name, type person and date as search criteria in the custom form ranges.
  When I enter the employee number, press the search button, I get the exact info in the block of result.
  Result block contains
  name of the employee, personid, emp numbed, org, start_date.
  Similarly when I enter the employee number, dept, I get the correct values.
  My question is, when I enter the date range. IAM unable to filter the data.
  When I enter START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') where block clause in the result. I had data for the range of dates also.
  
  If I give condition in where clause results take so long when I search with the name of the employee, number, dept, person type.
  
  If I have a query with the date, the persormance is good.
  
  Think you know everything, how it prevents START_DATE between nvl(:BLOCKNAME.) Start_date, 1 January 1901 ') and nvl(:BLOCKNAME.) End_date, 31-DEC-4712') when look us with the employee's name, number, dept, person type.

  So leave the WHERE clause of your empty block and put something like the following in your search button:

  IF    :BLOCK.START_DATE IS NOT NULL
     OR :BLOCK.END_DATE IS NOT NULL THEN
    SET_BLOCK_PROPERTY('YOURBLOCK', ONETIME_WHERE, 'START_DATE between nvl(:BLOCKNAME.START_DATE,TO_DATE(''01-JAN-1901'', ''DD-MON-YYYY'')) and nvl(:BLOCKNAME.END_DATE,TO_DATE(''31-DEC-4712'', ''DD-MON-YYYY''))');
  END IF;
  

• SUM (case use this structure to get average values on the date range

  I use:
  
  Oracle SQL Developer (3.0.04) build hand - 04.34 Oracle Database 11 g Enterprise Edition 11.2.0.1.0 - 64 bit Production
  
  How do we use the function sum with a structure of matter inside.
  
  so I gave that looks like have an ID, date and value. I'm looking to get the day 7 medium for the date range of 04/01/2013 to 20/04/2013
  

  with t as (
  select 1 ID_Key,to_date('4/1/2013','mm-dd-yyyy') date_val, 10 Value_num from dual union all
  select 1 ID_key,to_date('4/2/2013','mm-dd-yyyy'), 15 from dual union all
  select 1 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 20 from dual union all
  select 1 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/8/2013','mm-dd-yyyy'), 12 from dual union all
  select 1 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 8 from dual union all
  select 1 ID_key,to_date('4/10/2013','mm-dd-yyyy'), 6 from dual union all
  select 1 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 10 from dual union all
  select 1 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/14/2013','mm-dd-yyyy'), 0 from dual union all
  select 1 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 10 from dual union all
  select 1 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 5 from dual union all
  select 1 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 2 from dual union all
  select 1 ID_key,to_date('4/20/2013','mm-dd-yyyy'), 3 from dual union all
  select 2 ID_key,to_date('4/3/2013','mm-dd-yyyy'), 12 from dual union all
  select 2 ID_key,to_date('4/5/2013','mm-dd-yyyy'), 15 from dual union all
  select 2 ID_key,to_date('4/6/2013','mm-dd-yyyy'), 5 from dual union all
  select 2 ID_key,to_date('4/7/2013','mm-dd-yyyy'), 7 from dual union all
  select 2 ID_key,to_date('4/9/2013','mm-dd-yyyy'), 10 from dual union all
  select 2 ID_key,to_date('4/11/2013','mm-dd-yyyy'), 5 from dual union all
  select 2 ID_key,to_date('4/12/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/13/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/15/2013','mm-dd-yyyy'), 6 from dual union all
  select 2 ID_key,to_date('4/16/2013','mm-dd-yyyy'), 8 from dual union all
  select 2 ID_key,to_date('4/17/2013','mm-dd-yyyy'), 0 from dual union all
  select 2 ID_key,to_date('4/18/2013','mm-dd-yyyy'), 10 from dual union all
  select 2 ID_key,to_date('4/19/2013','mm-dd-yyyy'), 5 from dual
  )

  * Please let me know if the table does not load.
  
  I would get the average of 7 days, as long as there is date for the rank of enough previous dates, is it not, then it returns a null value.
  
  the results should look like this

  ID_Key      date_val     Value_num     7Day_Avg     7Day_Avg2
  1     4/1/2013     10          null          null
  1     4/2/2013     15          null          null
  1     4/3/2013     20          null          null
  1     4/5/2013     0          null          null
  1     4/8/2013     12          6.71          11.75
  1     4/9/2013     8          5.71          10.00
  1     4/10/2013     6          3.71          6.50
  1     4/12/2013     10          5.14          9.00
  1     4/13/2013     0          5.14          7.20
  1     4/14/2013     0          5.14          6.00
  1     4/15/2013     10          4.86          5.67
  1     4/16/2013     5          4.42          5.17
  1     4/17/2013     2          3.85          4.50
  1     4/20/2013     3          2.86          4.00
  2     4/3/2013     12          null          null
  2     4/5/2013     15          null          null
  2     4/6/2013     5          null          null
  2     4/7/2013     7          5.57          9.75
  2     4/9/2013     10          7.00          9.80
  2     4/11/2013     5          6.00          8.40
  2     4/12/2013     0          3.86          5.40
  2     4/13/2013     0          3.14          4.40
  2     4/15/2013     6          3.00          4.20
  2     4/16/2013     8          2.71          3.80
  2     4/17/2013     0          2.71          3.17
  2     4/18/2013     10          3.43          4.00
  2     4/19/2013     5          4.14          4.83

  As you can see, there are gaps in the dates, the value is then processed by zeros for the 7Day_Avg and then ignored for the 7Day_Avg2 (not counted in the number of days on average do to no valu_num line)
  I tried something like this at first, but becomes "missing keyword" error

  select
  t.*/,
  sum(
        case 
          when date_val between :day2 - 6 and :day2
          then value_num between date_val - 6 and date_val
          else null
          end
          )
          as 7Day_avg
  
  form t

  Should I have the structure outside the sum function?
  
  Any thoughts?
  
  Published by: 1004407 on June 7, 2013 11:06

  Hello

  If you want to calculate the average of the last 7 days, including the current day, then then RANGE should be 6 PRIOR, not 7.

  Try this:

  WITH got_min_date_val AS

  (

  SELECT id_key, date_val, value_num

  MIN (date_val) compared to (AS min_date_val)

  T

  WHERE the date_val BETWEEN TO_DATE (April 1, 2013 ', "dd-mm-yyyy")

  AND TO_DATE (April 20, 2013 ', "dd-mm-yyyy")

  )

  SELECT id_key, date_val, value_num

  CASE

  WHEN date_val > = min_date_val + 6

  THEN SUM (value_num) OVER (PARTITION BY id_key

  ORDER BY date_val

  PRIOR TO TIER 6

  )

  / 7

  END AS avg_7_day

  CASE

  WHEN date_val > = min_date_val + 6

  THEN AVG (value_num) OVER (PARTITION BY id_key

  ORDER BY date_val

  PRIOR TO TIER 6

  )

  END AS avg_7_day_2

  OF got_min_date_val

  ORDER BY id_key

  date_val

  ;

  Output:

  ID_KEY DATE_VAL VALUE_NUM AVG_7_DAY AVG_7_DAY_2

  ---------- --------- ---------- ---------- ------------

  1 1 APRIL 13 10

  1 2 APRIL 13 15

  1 APRIL 3, 13 20

  1 5 APRIL 13 0

  1 APRIL 8, 13 12 6.71 11.75

  1 APRIL 9, 13 8 5.71 10.00

  1 APRIL 10 13 6 3.71 6.50

  1 12 APRIL 13 10 5.14 9,00

  1 13 APRIL 13 0 5,14 7.20

  1 14 APRIL 13 0 5,14 6.00

  1 15 APRIL 13 10 4.86 5.67

  1 16 APRIL 13 5 4.43 5.17

  1 APRIL 17, 13 2 3.86 4.50

  1 APRIL 20, 13 3 2.86 4.00

  2 APRIL 3, 13 12

  2 5 APRIL 13 15

  2 6 APRIL 13 5

  2 7 APRIL 13 7 5.57 9.75

  2 9 APRIL 13 10 7,00 9.80

  2 11 APRIL 13 5 6.00 8.40

  2 12 APRIL 13 0 3.86 5.40

  2 13 APRIL 13 0 3.14 4.40

  2 15 APRIL 13 6 3.00 4.20

  2 16 APRIL 13 8 2.71 3.80

  2 17 APRIL 13 0 2.71 3.17

  2 18 APRIL 13 10 3.43 4.00

  2 APRIL 19, 13 5 4.14 4,83

  Post edited by: FrankKulash

  Sorry; I wanted to respond to OP, not Greg

• How to pass the date range as in URL filter go

  Hello
  
  I am trying to build a Url go that has two filters, date range & text. I built the url below, but he continues to throw an error. The url is not from the date max and the app starts following error:
  
  Error: Status: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46048] Month DateTime value 0 0000-00-00 is off limits. (HY000)
  
  Go to Url: https:companyUrl? GB & Options = rfd & Path = / shared/CompanyID/link & P0 = 2 & P1 = eq & P2=CustomObject4.%22Indexed%20Pick%201%22 & P3 = Leasing & bet = P4 & P5 = ""-CustomObject4 Custom Attributes '. " ZDate_26 & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'
  
  
  Please suggest.
  
  Thank you
  Kiran.

  It seems that you convert the data type of char to date in the URL, I don't think that this is possible.
  Your code is like
  & P6 = 2 + Date % 20'2014-08-01'+ day % 20'2014-12-31'

  It suppose to be & P6 = 2 + 2014-08-01 + 2014-12-31

  I suggest doing the formatting for this filed using column properties and try.

  Hope this help, pls mark if yes ;)

• Get number of records in the date range - IDE: PLSQL Developer

  I want to count the number of records of members who register within a date range specified, based on effective and expiration dates and their "elg_code". I posted the SQL code for some examples of data. What I would like to see returned is in three columns of the counties where the eff_date date_exp members fall within the date range specified by the SQL and have an Elg_code of ' ' (space).
  
  So what I would like is all members with elg_code ' ' where he eff_dt and exp_dt range is April 2012, 2012 MAY & JUN 2012. Thus, according to data from the sample I posted, Mark, where his elg_code record is ' ', his eff_dt is 01/01/2011 and April 2012 (30/04/2012) is his exp_dt. Range of the brand statement may 2012, but not MAY or JUNE of 2012. Marty would tally for the APR and MAY because his eff_dt is before MAY 2012 and his exp to MAY 2012. etc...
  
  According to the data below, the results should resemble:
  
  APR MAY JUN
  4-3-2
  
  APR should have FRANK, MARK, MARTY, MARY.
  MAY should have FRANK, MARTY, MARY
  JUN should have FRANK and MARIE
  
  NOAM and JOHN should not appear as his records with elg_code ' ' have no documents eff_dt and exp_dt which are April-June 2012.
  
  So what I tried without success as it appears that I have a kind of Cartesian question (?), is:
  
  Select count (m1.mbr_name) APR,
  Count (m2.mbr_name) MAY,
  Count (m3.mbr_name) JUN
  mbr2 M1,
  mbr2 m2,
  mbr2 m3
  "where m1.eff_dt < ' 01 - may - 2012"
  "and m1.exp_dt > ' 01-Apr-2012.
  and m1.elg_code = ' '
  "and m2.eff_dt < 1 June 2012"
  "and m2.exp_dt > ' 01 - may - 2012"
  and m2.elg_code = ' '
  "and m3.eff_dt < 1 July 2012"
  "and m3.exp_dt > 1 June 2012"
  and m3.elg_code = ' '
  
  
  Here's the DML
  
  Thanks for any help!
  
  
  create table mbr2 (mbr_name varchar (10), varchar (1) grpid eff_dt date, date of exp_dt elg_code varchar (1))
  Commit
  
  insert into mbr2 values ('BRAND', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (April 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('BRAND', 'A', to_date (May 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('MARTY', 'A', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (May 31, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARTY', 'A', to_date (June 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), 'C')
  
  insert into mbr2 values ('FRANK', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('FRANK', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('MARY', 'B', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (June 30, 2012 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('MARY', 'B', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ('JOHN', 'C', to_date (January 1, 2011 ',' DD-MM-YYYY '), to_date (July 1, 2011 ',' DD-MM-YYYY '), ' ')
  insert into mbr2 values ('JOHN', 'C', to_date (July 1, 2011 ',' DD-MM-YYYY '), to_date (1 January 2012 ',' DD-MM-YYYY ""), 'C')
  
  insert into mbr2 values ("NOAM" 'd', to_date (July 1, 2012 ',' DD-MM-YYYY '), to_date (31 December 2013 ',' DD-MM-YYYY '), ' ' ")
  
  Commit

  This gives you a report for the current month and the two front. Column header must be adjusted ;-)

  select
    count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), -1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -2)
    then 1
    end) April
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 0)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), -1)
    then 1
    end) May
  , count(
    case
    when
      eff_dt < add_months(trunc(sysdate,'MM'), 1)
      and
      exp_dt >= add_months(trunc(sysdate,'MM'), 0)
    then 1
    end) June
  from mbr2
  where
  elg_code = ' '
  and
  eff_dt < add_months(trunc(sysdate,'MM'), 1)
  and
  exp_dt >= add_months(trunc(sysdate,'MM'), -2)
  
  APRIL     MAY     JUNE
  4     3     2
  

• That really means the vertical range? And the gain factor?

  The NI PXI-5102 digitizer: that means vertical range really means, it is the range of voltage of the signal to be measured or the signal to the ADC input terminal?

  How to control the gain of the digitizer? And what are the factors that can affect the gain?

  The portrait is located between the valid entries range of the digitizer on that channel.  If you set the interval to a value that is not valid, it will be converted to the next highest value.  This is the way you control the gain of the digitizer.  It is easier to define the vertical range on the maximum expected range of your input signal and allow the driver to NO-SCOPE compel the beach to the next highest value.  This allows you to use your code effectively with more than one type of digitizer (5102 and 5112).  For example, you know that your input signal has a range of 3 v (+/-1.5V).  Set the vertical range at 3.  OR-SCOPE that will force to 10V, the next beach valid more high for the 5102.  You can find the valid vertical beaches for your device in the folder of Documentation OR-SCOPE in your Start menu or online.

  Mitigation on your scope probe will affect the vertical range of the device.  If you have a 10 X probe and defined the vertical range to 10, the actual vertical scale will be 1.  You can have NO-SCOPE figure that out for you by setting the mitigation of the probe with vertical Configuration.

  More information on the routes of entry, and gains are available in NO-SCOPE help about using vertical configuration.

• To ignore the date ranges that overlap

  Hi guys,.

  I have the tables below

  Periods

  START_DATE	END_DATE	ID
  30-SEP-05	13 OCTOBER 05	1
  12 OCTOBER 05	14 NOVEMBER 05	2
  15 NOVEMBER 05	15 DECEMBER 05	3

  T1

  DAT_COL	ID	AMOUNT
  11 OCTOBER 05	1	10
  12 OCTOBER 05	1	10
  16 NOVEMBER 05	1	10

  I need to ignore the remaining date range if it overlaps when comparing dat_col from T1 between the dates of beginning and end of periods table. Always need to consider the first periods

  output something like this

  ID	ID_1	START_DATE	END_DATE	DAT_COL
  1	1	30-SEP-05	13 OCTOBER 05	11 OCTOBER 05
  1	1	30-SEP-05	13 OCTOBER 05	12 OCTOBER 05
  1	3	15 NOVEMBER 05	15 DECEMBER 05	16 NOVEMBER 05

  I use query

  Select a.id, b.id, b.start_date, b.end_Date, a.DAT_COL from T1 a, (select id, start_date, end_date periods) b

  where a.dat_col between b.start_Date and b.end_Date

  Group of a.id, b.id, b.start_date, b.end_Date, a.dat_col

  order of b.start_date;

  ID	ID_1	START_DATE	END_DATE	DAT_COL
  1	1	30-SEP-05	13 OCTOBER 05	11 OCTOBER 05
  1	1	30-SEP-05	13 OCTOBER 05	12 OCTOBER 05
  1	2	12 OCTOBER 05	14 NOVEMBER 05	12 OCTOBER 05
  1	3	15 NOVEMBER 05	15 DECEMBER 05	16 NOVEMBER 05

  Test case:

  CREATE TABLE 'PERIODS '.

  ("START_DATE" DATE,

  "END_DATE" DATE,

  'ID '.

  ) ;

  Insert into periods (start_date, end_date, ID) values (to_date('30-SEP-05','DD-MON-RR'),to_date('13-OCT-05','DD-MON-RR'),1);

  Insert into periods (start_date, end_date, ID) values (to_date('12-OCT-05','DD-MON-RR'),to_date('14-NOV-05','DD-MON-RR'),2);

  Insert into periods (start_date, end_date, ID) values (to_date('15-NOV-05','DD-MON-RR'),to_date('15-DEC-05','DD-MON-RR'),3);

  Insert into T1 (DAT_COL, ID) values (to_date('11-OCT-05','DD-MON-RR'), 1);

  Insert into T1 (DAT_COL, ID) values (to_date('12-OCT-05','DD-MON-RR'), 1);

  Insert into T1 (DAT_COL, ID) values (to_date('16-NOV-05','DD-MON-RR'), 1);

  CREATE TABLE 'T1 '.

  (DATE OF THE 'DAT_COL',

  'ID '.

  );

  Hello

  If you really want to use something close to what you posted, then you can do it like this:

  WITH got_r_num AS

  (

  SELECT a.id

  b.id AS id_1

  b.start_date

  b.end_date

  a.dat_col

  , ROW_NUMBER () OVER (PARTITION BY a.id, a.dat_col)

  ORDER BY b.start_date, b.end_date

  ) AS r_num

  FROM one t1

  ,         (

  SELECT id, start_date, end_date

  Periods

  ) b

  WHERE a.dat_col BETWEEN b.start_date

  AND b.end_date

  GROUP BY a.id, b.end_date, a.dat_col, b.start_date and b.id

  )

  SELECT id, id_1, start_date, end_date, dat_col

  OF got_r_num

  WHERE r_num = 1

  ORDER BY start_date

  ;

  Note that the WITH clause, that's essentially what you posted in your first post (with the added r_num column) and the main request is essentially the same as in response #1.

  But why would you do something like that?  View online or GROUP BY allows all.  If you remove them, you get the #1 response solution.

• How to calculate the periods that overlap between two or more given the date range?

  Hi all

  If there are several durations then how we can calculate the period of time that overlap between these times.

  For example: for 3 time periods. 03/12/2015-16/08/2015, 05/01/2015 to 31/07/2015 and the 06/09/2015 to 30/11/2015, how the overlap period can be calculated?

  There are many potential unknowns in your question.  For example, you want to count any overlap at all?  If two dates overlap, what matters?  Overlap - each of them?

  In any case, here is a solution that counts how many periods are overlapping in any point in time...  She, of course, using temporal logic.  You can then use ValueAt(), WhenLast(), WhenNext(), etc. as appropriate.

  Assume that your model has a child entity called 'the period' with name 'all time periods' relationship and basic attributes 'start date of the period of time' and 'date of end of period of time'.

  In your example:

  an entity should have the time period start date = 03/12/2015 and the date of end of period of time = 16/08/2015

  another entity might have the time period start date = 01/05/2015 and the date of end of period of time = 31/07/2015

  another entity might have the time period start date = 06/09/2015 and the date of end of period of time = 30/11/2015

  To find the number of overlapping over time, we want to count or entities that have an active period, so the rule is perhaps the sum:

  the number of overlapping = the number of all the periods for which it is true that the time period is active

  How do we know a time is active?  This is the time logic comes in.  He is active on or after the start date or no later than the end date:

  the time period is active if

  TemporalOnOrAfter (the date of beginning of period of time) and

  TemporalOnOrBefore (date of end of period of time)

  That's all.  Now, you can perform a temporal visualization of the 'number of overlapping' and you'll see it rise and fall over time.  As a reference, he said that the number of overlapping = 3.0 from 06/09/2015 across 31/07/2015.

  I hope this helps.  You can use the same model to count periods of time functions, but you end up having to use the most logical date.  You of course can count the total number of entities and compare this number of overlap over time to see if they overlap, but I digress...

• Form of customization: how to access the data of another form

  Hi all
  
  I need to customize the form end job and for a condition, I need to use the Probation_Period_End_Date (: ASSGT.) D_DATE_PROBATION_END) which is available in the form of assignment.
  
  Any idea how can I use this whiout any function of writing database?
  
  
  Thank you
  Avinash

  Hello Avinash,

  You can use the query directly in the customization of form as Conditions
  Select date_probation_end in the per_assignments_x where person_id =: PERIOD_OF_SERVICE. PERSON_ID

  and put in your state of health as if you want to post Probation date of end is less then sysdate then in State in as.

  TRUNC (SYSDATE)< (select="" trunc(date_probation_end)="" from="" per_assignments_x="" where="" person_id="">
  define the error message.

  Kind regards
  Saurabh

• Auto generate the data field item2

  I have fields in my application
  
  If I select the Item1 number it will automatically give me the value in Item2 refers to this item1 can you please answer on that

  Hello

  It is necessary to a column of data for the updated item in the record.

  As long as you set the value everytime the page loads, you can change the value of the Source used for: only when the current value in session state is zero

  Then create a calculation for your page, your page that runs "before the header" that executes your SQL code

  Andy

• How to display only those items that are in the date

  Hello
  
  I have a new database and events for a nursery for children site I am building. I have no problem out of the news that I thought... but I'm having a problem with the events.
  
  I want to display only events that are dated. If the events that took place are no longer displayed. I don't want to delete events though, as I need to archive them.
  
  I have a date field in the table that is in the following DD MMM YYYY format (example: October 27, 2006).
  
  Is there a query I can do to select only events that have not occurred yet?
  
  Thank you

  This will give you the only current day events. Of course like Dan said that the dates must be stored in the field date.

  I'll call you datasource as "yourdatasource".
  Call your table as "yourtable.
  and by calling the column with the date as «DateColumn» field

  
  
  
  SELECT * from yourtable
  WHERE DateColumn = #dateob #.
  
  
  Then out it where you want...
  .....

• Get the date range min/max for consecutive events.

  Hi all...

  I am fairly new to the programming of the DB and is working on some examples I picked up a few places. The database version is 10g R2.

  I would like to configure the data here and I can explain my requirement.

  create table table_1
  (product_id varchar2(25),
  region_id  number,
  event_id number
  event_date date,
  event_status number(1))
  /
  
  
  

  Now the data because it is->

  insert into table_1 values ('Prod-1',10, null, to_date('01-feb-2014','dd-mon-yyyy'),null)
  /
  insert into table_1 values('Prod-1',10, 1001, to_date('10-mar-2014','dd-mon-yyyy'), 1)
  /
  insert into table_1 values('Prod-1',10, 1001, to_date('20-mar-2014','dd-mon-yyyy'), 3)
  /
  insert into table_1 values('Prod-1',10,1002, to_date('01-apr-2014','dd-mon-yyyy'), 1)
  /
  insert into table_1 values('Prod-1',10, 1002, to_date('10-apr-2014','dd-mon-yyyy'), 3)
  /
  commit
  /
  
  
  
  

  If the table now contains the following data

  select * from table_1; 
  
  
  

  PRODUCT_ID REGION_ID EVENT ID EVENT_DAT EVENT_STATUS

  ------------------------- ---------- -------- --------- ------------

  Prod-1 10 1 February 14

  Prod-1 10 1001 10 March 14 1

  Prod-1 10 1001 20 March 14 3

  Prod-1 10 1002 1 April 14 1

  Prod-1 10 1002 April 10, 14 3

  Now, the condition is as follows:

  Above is the dates start and end for the tests on a product in a given region. The event_status column indicates the dates of beginning and end. Event_status = 1, for the date of beginning and the event_status = 3 of the end date.

  A new event is now coming from March 21 and ending on March 31.

  The power required is a product identifier / region; If there are events that are ending and then count the days, for example, 1001 to end on March 20, but now the new event begins on 21 March... and the new event ends on 31 March and event 1002 begins 01 - Apr... and so on.

  The output required for this is as follows:

  PRODUCT_ID REGION_ID EVENT_MIN_DATE EVENT_MAX_DATE

  ------------------------- ---------- -------------- --------------

  Prod-1 10 10 14 March 10 April 14

  The output should give a product identifier / region, when events are immediately after the other, out the min date of beginning and end of max for all these manifestations of "back to back".

  Now I wrote the code for this, but it goes into a purely 'loop' for application in PLSQL... But my head tells me that if the results are correct. the PLSQL implementation is not the most efficient and effective way.

  Can someone help me to form the query? I tried to use functions analytical min/max but it gives me the start and end dates back even if my events are not "back to back" or previous/succeed each other... so my query result is not quite correct.

  Am reading on the TYPE clause but would be grateful if someone could help me with this query... or any other form better to implement this event so PLSQL can be used. The database version is 10g R2.

  Thank you

  K

  PS - The number of such events back to back is limited to 4 and the events could be created in any order. But if someone could help me with the scenario above; am sure I could make a request addressed to any change in the order. :-)

  No this isn't a recursive with clause, perhaps the UNION ALL you got confused. She will work with 10g.

  Since there are 2 tables that you said, the block all_data brings together only the lines of the two tables. table_1 start_date and end_date are built from the event_status (where the max in group by).

• The smart Albums based on the date range cause app Crash Photos

  While I'm setting up a new Smart Album based on day of photos between 12/01/2015 and 31/12/2015 the Photos app closes with a crash. Cannot set the second date (the end date for this album). However, I can easily create a new Smart Album for next month (01/01/2016 and 01/31/2016). I create smart Albums, because the new Photos app does not like the old iPhoto does with my Photos from the photo gallery.

  How can I solve this? I don't have an album of December...? !

  You are in an area where the date format is different from the United States?  Earlier this year, we have seen small business issues have reported that rules for smart albums date range do not work with the primary language set to French or German.

  Try to change the primary system language to English with an English date format. Photos could be trying to read the 12/31/2015 as the 12th day of the month 31.

  Or use a different date based on 'before' rule and after.

  

• Synchronization of calendar to blackBerry Smartphones. first of all to synchronize all elements, then the date range, then all the items; all previous deleted items

  I work IT at my company.  My colleague got a blackberry storm.  We hung up and synced Outlook 2007 for the Blackberry.  Everything went correctly.

  Initially, we had the synchronization schedule "all items". But after watching the parameters, we decided to only synchronize a range of dates.  We sync'd, but we didn't know that the blackberry removes anything outside the range of dates.  Rather than just update everything that falls in the range of dates.

  For us he returned to "all items".  The Blackberry now tells Outlook to delete all the entries outside the range of dates.

  HELP I'M SCREWED!  My colleague schedule is all messed up.  Can recover it software Blackberry, all these deleted items?

  Or should I go to my backup and recover all its information?  I can do it, but that requires a lot more work.

  If there is another position that helps out, please please direct me to it.  I'll keep looking...

  Scott

  Well.  It becomes a problem. But first my solution:

  I went to a backup and restore of the mailbox.  Appointments in the calendar have been copied in the calendar and sync whalla, it's done.

  If this topic is made, however the problem is not.  The storm Blackebery was still deleting old appointments.  Then I learned about '' go go = Forever. ''

  We'll see how it goes.