Registration key for the new installation of Windows 8

Similar Questions

• Portege Z930 - 14 X - need key for the new installation of Windows 7

  Hello

  our company bought a Toshiba Portege Z930 - 14 X, and it is necessary to do a clean install of Windows 7.

  Unfortunately there is no key working Windows 7 can be found anywhere on the unit.
  I read the installation key, but the key is not supposed to be activated, so does not work for a clean install.

  There is usually a sticker of license at the bottom of the device, but this laptop has nothing.

  So, where can I find this Windows 7 key?

  Kind regards
  GSUs

  > Unfortunately there is no key working Windows 7 can be found anywhere on the unit.

  If you want to use a clean Windows system, you must purchase the MS Windows disk containing the serial key.
  Toshiba laptops are preinstalled with Toshiba image containing the OEM version of the Windows system and drivers. This image is already enabled. The series key isn t necessary.

• key Windows 8 for the new installation on windows 8.1

  Hello

  Anyway we can use key windows 8 to install windws 8.1 fees

  Thank you

  Hi Imran,

  You can't use the product key Windows 8 If you perform a new installation of Windows 8.1. The recommended method is to install Windows 8 and upgrade to Windows 8.1 by store. You can use the upgrade product key to Windows 8.1.

  For more information, see this article.

  Updated to Windows 8.1 : FAQ

  http://Windows.Microsoft.com/en-AU/Windows-8/upgrade-to-Windows-8

  Hope this information helps. Response with status so that we can help you.

• News of connection fails for the new installation of Windows 7

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  Try to reinstall Windows and configure the account again, and after reaching the office, create a backup account.

  In addition, for security reasons, enable the administrator account.

  Reinstall Windows 7:

  Using the recovery partition to reinstall Windows 7

  Step 1

  Restart the ThinkCentre and repeatedly press the "F11" key like start the computer to the top.

  Step 2

  Watch a message on reboot telling you press F11 to access the product recovery program. Quickly, press the "F11" key when you see the message. If you do not see the message, you do not have a recovery partition on your hard drive and must instead use recovery discs. Once you enter the recovery mode, either by pressing 'F11' or booting from a recovery disk, the ThinkCentre shows main recovery screen.

  Step 3

  Follow the prompts to choose your recovery options. Use the settings by default unless you want to customize the recovery. You can choose options such as full recovery ',' "Content factory" or "Restore my hard drive to the original state of the plant," according to the particular ThinkCentre model.

  Step 4

  Insert new disks when you are prompted if you restore DVDs.

  Step 5

  Click 'Yes' when prompted to restart the computer. From this point, the recovery process is completely automatic. Your computer restarts several times, and the whole process takes sseveral minutes or more. Once installation is complete, Windows displays the configuration for a new user screen, as if the computer comes out of the box.

  Step 6

  Complete the installation of Windows by entering in your language, regional settings, network settings and the Windows user name. You may also enter your Windows product key, which is on the DVD provided with the system, or on a sticker on the computer.

  --------------------------

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  Create an extra account:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Activate the administrator account:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

• Don't know password for the new installation of Windows 7 Ultimate on VmWare Fusion

  I bought Windows 7 Ultimate 64 bit and installed on my MAC OS X machine in VmWare Fusion of an image file provided by the seller of Windows 7.  However, when I start the merger, there is a 'user' set up account, and it asks for a password. Typing in anything doesn't work, or 'guest', 'user' or 'password '.  So I can't past the login screen.

  What can I do?

  That was my mistake, and I 'found' the password trying my MAC password.  This was extracted automatically, or if I entered during installation without remembering, I don't know.  In all cases, it is resolved.

  I can't mark my own reply as 'Reply', nor can I delete this question :-(

• Activate email for the new installation of windows 7 Home premium software

  (1) install windows 7 premium homw today. Not have an e-mail software included.

  (2) computer is a laptop HP G70 - 467 CL

  (3) my internet provider Comcast - my eamil address is * address email is removed from the privacy *

  (4) my phone number is 904 284-8546

  (5) need help to hang internet and email services

  You can download free Windows Live Mail software or third party alternative:

  Windows Essentials - download Windows Live Essentials

  How to Setup accounts in Windows Live Mail : Notebooks.com

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My C:\ Total size of the disk was 1 TB, I shrunk it once, may I take part in the new installation of windows without losing my files that are on my other partitions?

  My current C:\ Size of the drive is 500 GB (I shrunk it once).

  Thanks for help.

  See the following topics:

  http://notebooks.com/2011/02/25/how-to-create-a-simple-partition-in-Windows-7-quick-tip/

• my windows 7 ultimate product id is-00426-292-0000007-85734(please give me my product key for the successful activation of windows)

  my windows 7 ultimate product id is-00426-292-0000007-85734(please give me my product key for the successful activation of windows)

  your product key will be on your COA, proof of license label, or if a download in your email.

  the product id you have posted is for default key Windows Ultimate uses when no key is entered during installation and cannot be enabled.

• the product keys for the new beta out yet

  Cannot find product keys for the new beta version of xbox. they don't give any more?

  Hello
   
  I suggest you to contact Xbox Support
  http://support.Xbox.com/en-us/contact-us
  See also:
  http://support.Xbox.com/en-us/
   
  Hope the information is useful.

• Need hardware for the new installation of R12 (12.1) under Linux

  Cheap DBA
  
  Kindly advice me the hardware, CPU and memmory for the following specifications for the new installation.
  
  100 users.
  
  500 GB Production database
  Application of Production of 500GB
  500 GB of Test instance.
  
  Linux operating system.
  
  Oracle R12 Application application (12.1)
  
  No configuration RAC and DR.
  
  
  Best regards
  SG.

  PGO

  Please visit the links referenced in this thread.

  Sizing
  Re: sizing...

  Kind regards
  Hussein

• How can I connect the new installation of Windows 7 for the user profiles on a separate drive har?

  Original title: connect Windows 7 to the output of user profiles?

  I want to reinstall Windows

  My user profiles are on a separate HARD disk
  Is it possible to connect the new install of Win 7 to these existing profiles
  Or I'll create all new profiles and just move all the files manually?

  You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.

• Logical disk partition not recognized in the New Installation of Windows

  Hello.  I would appreciate someone to give me any advice.  I don't know if the problem I encounter is an oversight on my part, but it was not something that I anticipated.

  To give a bit of background, until last week, I was running a Windows 7 system on my computer which included three hard drives (4 TB, 2 TB, and a smaller disk).  The 4 TB drive included my boot drive with Windows on a partition of 2 TB and then the unallocated space has been transformed into a new partition in disk management, received the drive letter G and was used for long term backup of data.

  Since then, I built a new computer and installed a new version of Windows 7 on a small SSD.  During this process, I have not all disks connected to the machine (except the DVD player) so that there is no possibility of installation of Windows, do something for these readers I didn't (I got burned by this time long ago when you reinstall Windows 95, which makes me just feel old).  After the whole installation process was performed and the new version of Windows has been working well, I opened the machine and plugged the drive 4 TB and 2 TB, assuming that Windows did not recognize them when I started.

  When I started in Windows, Windows does indeed recognize the two drives and assign drive letters.  But in the case of the car of 4 TB, he acknowledges that the partition containing my old boot drive.  No drive letter is assigned to the secondary partition.  When I go to disk management, it shows all of the remaining spaces as unallocated space, but seems not yet quite recognize space completely in the way he would if I'd created directly.  For example, if I right click in that box, I don't get the normal options to create a new Simple Volume.  Everything on this menu is grayed out except properties and help.

  So I guess I have two questions.  (Leaving aside the possibility of a hardware problem), was I wrong to assume that a hard drive divided into two partitions could be transferred from a Windows machine to another?  I honestly thought that no matter where no matter what Windows 7 machine would recognize the two drives, but maybe I'm missing something fundamental.

  Two and more important still, there advice for access to the data on this drive?

  Hello

  A problem that could happen is that the disk partition has security setting so that the profile of the user that created it would be able to access it, and seeing that you are trying to access from a new profile may not not allow you to access

  To access these files, you can try to boot from the old hard drive manually to change the setting of the partition or simply manually move the files and delete the partition.

  To start from the old disk hard restart have the hard drive is plugged in, restart the computer and while it is booting F12 key to select the boot device, after that, select the old hard disk and access them normally.

  hope this has helped.

• After the new installation of windows installation

  Hello

  My computer has receantly had virus problems and I want to do a new installation of windows.  After I do this can I reinstall my copy of creative suite and use the code provided to or he'll tell me its already in use since technically, I did use it once already?  If Yes is it possible around it?  I really don't want to drop $800 again just to reload windows on my computer.

  Thanks for any help!

  Disable your existing installation of Creative Suite for free activation.

  Open any application e.g. Photoshop then help > Deactivate. That will disable the entire suite.

  Reinstall Windows.

  Reinstall the Creative Suite and it reactivates during installation.