Registration of multiple layers

Similar Questions

• straighten multiple layers at once with the ruler tool

  Is it possible to use the ruler tool and straighten multiple layers that require the same correction in both?

  One or both them and make all at once.

  

• drag multiple layers from one document to another

  When I drag multiple layers from one document to another, now the keys ctrl-shift-alt (that is placed exactly in the same place) Photoshop changes the selected layers. He eithers add a leyer or just pass.

  He wants me to drag a segment of the leyer where there is 'information' or pixels.

  I drag in the document itself, not the layerpanel.

  In previous versions, it wasn't like that.

  Sometimes there is a very little information or pixels in a layer. This is way hard to aim straight for photoshop to do what I want it to do.

  I don't know if it's done on purpose or it is a very annoying bug.

  Photoshop 20151114.r.301x64

  win10 64-bit x 64-proc

  Intel i7 - 4770 s 3.1 GHz

  24 GB RAM

  SSD

  Well, it is quit interesting: while we are working on this problem, I advised a new update for photoshop: some problems occurred with the last update.

  I was working with 20151114.r.301

  And now I have the 20151209.r.327 version (which comes in fact in a few minutes ago)

  I tried the same thing as above and now my problem with the sliding of the layers went!

  So it was a bug. Nothing to do with the settings or anything.

• Can someone tell me how to show/hide multiple layers at the same time?

  Hello

  Can someone show me how to make more than one layer visible or invisible, without having to click on each separate layer? -J' have more than 100 layers in a drawing, and it is very tedious to have to click on each individual layer to hide it or show it. I just started using Photoshop elements 13, on an iMac

  Thanks for any advice.

  You can Option , click on the eye next to the thumbnail icon of the layer to hide all selected layers, but.

  Option , click New to display all layers.

  Order click to change the visibility of the selected layer switch

  To hide multiple layers, select the layers, right-click on one of the eyes, and click hide this layer

  Repeat to repeat the visible layers.

  You can also click on one of the eyes and then drag down or to hide layers and invert to make the visible layers.

• Hide multiple layers in 3D?

  I have a comp which is essentially a map projection with several slices of an old photo of a House stuck on images of the House that I filmed.  I used tracker camera 3D NULL values to place them in space.  Does make sense so far?   But now, I have a problem where I would hide all the layers at the same time pen out and do consider smooth on the edges.  For some reason, the mask sticks just the images I shot initially and layers in 3D.  Tracker mask is good except that you cannot change the path at all once it is followed because it uses data points to mask path as Tracker mask points.

  I tried precomping, but he has not made a difference.  Which means, I precomped all layers and then tried to mask/feather as a single unit.  Did not work.

  My goal is to have a mask to stick at home and have the kind of mask of morph in the clip.  The rest of the project to the other shots was easy.  Only, I had a photograph for each shot.  I have followed 3D clip, is a null value, which is attached to a point of Tracker, copied the position that NULL to the photo and then adjusted the picture up to what he did.  It works like a charm.  But, when I take a model of pre of several layers that something goes wrong.

  Is there anything I can try?   Check out the photos.  The photo of the top is one I'm trying to figure. It's a glidecam turned the cap towards the House.  The 3D tracker works very well on images for all the clips.  The bottom two are pans simple tripod.  When the camera moves essentially, the mask turns and changes shape in a sort of bio of passage.  I want to achieve for the top of the master page.

  Thank you!!

  

  

  

  Here's what you have to do. First of all, make sure that you do not have the Ray-traced rendering engine turned on. Second, your multiple layers composing them. Third transformation of the collapse. Fourth, add a new layer 3D by using a solid red or blue with the screen blend mode and position this layer so that it will cover the whole value demo. Gold and this is the reason for the screen blend mode, use the tool pen to draw your mask on the layer, and then set the layer as a track matte for the demo. animate the matte and you're done.

• How to brush across multiple layers

  Good afternoon

  I have several layers that are all the same size I want to use a brush everywhere at the same time - and yet whenever I select several layers the brush and pen tool me don't give a sign of «» Anyone know an easy solution? I just want to sign my name through several images at once - I'm guessing a bit like a watermark. With the help of CS6 creative cloud on Windows.

  Hello! Solution of Howard, I would add that it is not possible, as you have noticed, to apply a brush stroke to multiple layers.

  You can use the keys ALT + [shortcut key to go to the next layer to the bottom of the stack.

  If you have too many documents, the creation of an action can be a way forward.

  (I guess you stacked layers in the same document, to be able to export to a gallery?)

• Copy multiple layers

  Hello

  I'm a newbie using Illustrator CS4.  I have a work plan that is full of graphics on multiple layers.  All I want to do is make a copy of this work plan, but maintain all layers.  However, when I copy and paste all the layers on a white work surface, then all of the graphics are pasted into a single layer.  Help, please?

  Thank you!

  In the flyout (top-right) of the new document layer panel, make sure that layers of dough remembers is checked.

• Change the multiple layers at the same time

  Hi all
  Is it possible to change the position of the multiple layers at the same time? that is to say: I've got a slideshow made with several layers (probably about 60) while back and now I need to re use it in a different size (smaller). When I just resize the document, my slide is no longer in the center of it and is bigger. I would like to: 1. change its position within the document. 2 reduce entire layer together. If 2 is not possible, fine, but to me, there may be a way to change its position. Thank you much for the help!

  If you look at the area where Flash displays your frames per second is a small button (it looks like 2 boxes blu - ish overlapping). It is the button "edit multiple layers. Once you press this, you will see a marker on your time line asking you to select the images to change. Stretch this segment to cover all the images you want to include in your editing - lock all layers you want to include in your installation. Then, you can press Ctrl + a to 'select all' - this will only select executives in "onion" and unlocked frames - from there, any changes will not affect what is selected. You have to play with how it works because it can be a little difficult to understand (when it comes to points of alignment and balance, etc.). I would like to make a copy of your flash document to test this point until understand you before you start your original edition.

• Fiducial features added to multiple layers

  Hi all

  I try to make a 3D topographic map and have been roadblocked by the Illustrator! (check out this link to see what I mean map Topo cut laser wooden A Portland, ME |) The Shamblog)

  The difference between my card and related is that I have hundreds of layers and one is 10.

  I have all the layers tangled in illustrator, but when I export the DXF all get mixed together in the CAD file. Because it would take me weeks to separate all the layers in CAD I decided to take the option two, which exports a layer at a time.

  
  The problem with this is when importing in Solidworks the layers automatically will not align and the eye is almost impossible which leaves me with option three. Export a layer at a time with four identical characteristics (i.e. small circles in the corners) which will be used for alignment and scaling once imported into the CAD program.

  The question I have is how can I add these benchmark characteristics for all my layers?

  Alternative ideas would be appreciated as well!

  Best,

  Pat

  The question I have is how can I add these benchmark characteristics for all my layers?

  Assuming that:

  • Each Cup is a single object (not several individual trajectories resembling a single object)
  • Each Cup path resides on its own layer
  • All the layers containing the cut paths are adjacent in the stacking order

  This could be fully automated with a few lines of JavaScript. But before that, you can record an Action (macro) to replicate a registration mark in the same position on each layer:

  1. Place on the lower layer.
  2. Draw a registration mark. (For example, a small square in the upper left corner, beyond the limits of all the cut paths)
  3. Edition > copy
  4. Actions palette: new Action. Start recording.
  5. Select > next object above
  6. Edition > paste in front
  7. Actions palette: stop recording
  8. Scripts palette: activate the Mode button
  9. Range of action: click on the recorded your Action button, once for each remaining layer. Whenever you click the contents of the Clipboard (the registration mark you copied at the beginning) is glued in front (so on the same layer as) each of the paths of cutting.

  In the receive routine (assuming you need to re - assemble the cutting paths in the record), align all objects imported at the top left.

  JET

• How to select multiple layers in photoshop via a script

  Is there a way to select multiple Photoshop layers via a script without using the listener script? I am

  looking everywhere in the API, but I'm not able to find anything. Maybe im just not true, please help!

  Select more than one layer requires the action handler code. the DOM can not do and is slower anyway. If you use scriptlistener works, here's what you should go with.

• How to export multiple layers to separate PDF files?

  I just upgraded from Mavericks to Yosemite and all my CC Adobe until 2015. So far I love it, but I have a nagging problem: export layers to separate PDF files.

  My file has 38 layers, each of them must be separated in PDF format, so I use the script that is embedded in SaveDocsAsPDFs. The first time I run it, it ends up split on most files, but not all, so I thought I'd run it once again: no chance. Whenever I run the present, he eventually put all the active layers in a pdf from single page instead of save them as individual PDF files. I've spent the better part of two hours online hunting and are all I can find third-party scripts that actually do what I need, rather than use the builtin scripts.

  Is there a way someone can help me with this problem? I'll have much, much more files like that and I would use the original if possible script. It is everything on a Mac. Specs below.

  Mac Pro

  Quad-Core Intel Xeon

  3.2 GHz

  32 GB

  The SaveDocsAsPDFs allows to save multiple documents open simultaneously in artificial intelligence to separate files. He doesn't have layers in separate documents. You can use one of the scripts that you got to do what you want.

• Copy and paste multiple layers (with objects) of one movieclip to another

  Hey guys,.

  I'm really frustrated with myself because I believe that this should be easy.

  But I was stuck for centuries, hopefully you guys could help out me.

  I try to copy the images of 6 different layers and objects (action script, own movements tween, buttons, graphic elements) of one movieclip to another. But as soon as I did this, everyhting seems to have shifted and if I try to reposition elements in the new clip, it seems that I must repeat after each keyframe for each layer.

  So my question is

  Is a. possible to duplicate a clip, but give it an instance name (a completely new movieclip with the same frames and layers in the same position as the previous)?

  B. How can I move multiple objects through the layers and keyframes?

  I hope that makes sense.

  Thanks in advance for your help.

  M.

  A. you can create a movieclip instances just by dragging the movieclip on the stage and with actionscript library (if the movieclip is exported for actionscript).  all instances of movieclips created in this way will be identical.

  You can also right-click on a clip from the library and click on duplicate movieclip and then change the duplicated movieclip.  instances created of the split movieclip and original movieclip can be different.

  B. I do not understand your question.  I understand (I think) your problem.  to copy specific layers/frames, just shift-mousedown and drag through all layers and images you need.  Don't be shy on the inclusion of the layers and or framework you can remove the latter.  then paste it in a new movieclip.  remove the layers that you don't want.  If you remove all executives of other layers, you must remove the frame of all layers or you will have problems as you described.

• How to get the multiple layers of data

  Hello

  I imported two jpg files into a single composition. Please follow this procedure...

  1 created a composition, say his name testCompo

  2 imported a file1.jpg in the file-> Import-> file draft

  3 imported a file2.jpg in the file-> Import-> file draft

  4. drag the two files, file1.jpg and file2.jpg, in the testCompo

  Now, I have two layers (it is file1.jpg and nested are file2.jpg) in my testCompo. How can I get the information in pixels or pixel data of the

  the two images (IE, I mean layers).

  I knew that params [0]-> u.ld is the first data layer in

  () EntryPointFunc
  PF_Cmd cmd,
  PF_InData * in_data,
  PF_OutData * out_data,.
  PF_ParamDef * params [],.
  PF_LayerDef * output,
  void * extra)

  So what about other data layer? Then, finally how can we get the multiple images/layers data in AE?

  Thanks in advance!

  It's the thing.

  You must have a param layer (let's say it's param number 3).

  Use this param to select any layer of the model.

  Now you checkout param 3.

  what you get is a paramDef structure containing the pixels of the layer 3 Advanced param to.

  you will find this information at:

  paramDef-> u.ld.data (or something close to that. I do not have in front of me)

  This way the jpg1 affect can get jpg2 pixels and jpg3. any layer in the comp.

• Excess of text with multiple layers

  I'm creating a bilingual brochure in InDesign with three layers; German, English and a layer of the image. German and English layers consist only of text boxes. When you view the document in InDesign with each of the three visible layers, some text boxes are the two texts are each on the others and others that one of the text boxes, then the other zone of the other layer text either invisible or packed off the page. This means that when I export it as a PDF file, certain parts of one of the layers of language do not exist. InDesign was told in these places, I have overset text I need to fix. I need the text to inflict on one another, however, so that the two versions are the same.

  Is could someone please tell me what I could do here? I would be very grateful for any help.

  Thank you

  I guess, there is dressing applied on some of the blocks of text.
  Turn off wrapping of text for all text frames and that there should be no problem to export in PDF format with all the layers and objects remain in place.

  Kind regards
  Uwe

• Copy and paste multiple objects in Illustrator to Photoshop in the form of multiple layers

  I am working on an application and will stick in hundreds of groups from Illustrator to Photoshop.

  Is there a way I could select all in my Illustrator file and when I paste it into Photoshop it sticks each object as its own layer (I need it to stay Smart Objects).

  Here is a picture of what I'm working on: http://i.imgur.com/bSn7Qew.png

  Each number is a group of several objects and I'd love to be able to copy all and paste into Photoshop as 100 layers rather copy and paste each number one by one.

  In Illustrator make each unique in a compound shape. (use the menu in the pathfinder for this Panel.

  Then export a PSD in Illustrator using editable character maximum. The forms will then form layers in Photoshop.