Registration of Notebook issue - Windows version has changed

Similar Questions

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• downloads window appearance has changed - how do I restore?

  Download window works OK when in full screen but when in a minimized window, the appearance has changed, so it is impossible to read what is there. How can I restore it to original settings?

  You have any addons/extensions that can style it somehow? Go in Addons > Extensions (and appearance), and watch well everything that can change the window display mode. Change the options accordingly.

• ORA-20505: error in DML - data in db Version has changed

  Hello
  Request Express 3.1.0.00.32
  I created a report and master detail in the sample Application on oracle.application.com. I get an error on my Master form when you click < Previous and Next >. I saw other problems of this kind in the forum, but it seems that everyone is a little different. Can someone help me with this error when you browse the next answer (s). Thanks in advance.
  
  ORA-20505: DML error: p_rowid = 6, p_alt_rowid CUSTOMER_ID =, p_rowid2 =, p_alt_rowid2 is. ORA-20503: current Version of the data in the database has changed since the user initiated the update process. current checksum = checksum of the "E9A08EDC02A82871E6865DB254B09ED2" = "39454529513F24BE60C167752BF71750."
  
  I created another page master detail and I don't have any errors when scrolling using the <>. This is a process that can be causing my error by using the page master original detail.
  

  DECLARE 
  CUSTOMER_ID VARCHAR(20);
  BEGIN
   SELECT CUSTOMER_ID INTO :P21_CUSTOMER_ID
   FROM DEMO_CUSTOMERS
   WHERE CUST_FIRST_NAME = :P21_CUST_FIRST_NAME;
  -- processing here
  EXCEPTION
    -- Catches all 'no data found' errors
     WHEN NO_DATA_FOUND THEN
       DBMS_OUTPUT.PUT_LINE
         ('No Data found for SEARCH on ' || CUSTOMER_ID);
  END;

  Published by: Charles was April 30, 2009 11:40

  Hi Charles,

  I had a look at your page 21.

  The problem was that the 'Values of Fetch 2' process was not conditioned and was running in the point of the process "on the load - before the Header." That meant he was running whenever the page is loaded. This process checks the value CUSTOMER_ID in P21_CUST_FIRST_NAME that, because the process of "search for the line...". "has not been performed at that time there (he turns"on the charge - after the Header"), will always return the same value CUSTOMER_ID from when the page was first loaded. The next/previous buttons, however, moved the front/rear P21_CUSTOMER_ID only one value (this became obvious when this field was changed from 'Hidden and protected' to 'Text'). Therefore, the data on the page was for "Albert" but was it to CUSTOMER_ID for any document was previous to the Albert one. Thus, moving next/previous always caused a mixture of real data.

  I changed the "Fetch values 2" process to depend on P21_CUSTOMER_ID is NULL. In this way, the CUSTOMER_ID value found ONLY by code when the page is loaded for the first time. Subsequently, it is controlled by the next/previous feature.

  Andy

• Appearance of Windows Vista has changed and looks like older versions

  I have no idea how the settings changed, but on my PC at home, a window Vista, the looks of gray appearance, as the older versions of Windows. How can I return records / other appearance of applications for return to the original format?

  Never mind. I just had to restart the computer, and then reopen the appearance settings.

• Photo Viewer Windows 7 has changed?

  Hello.  I use Windows 7 and noticed yesterday that when I open a picture by double clicking on it in a folder, it opens now differently from two days ago.  The difference is that the slideshow button which was located at the bottom of the screen in the Center no longer appears.  Previously, I could use this button to start a simple slideshow that would allow me to right click on the screen during the show and control the speed of the slide show.  Now, I can only start the slideshow by clicking on the slideshow icon in the lower right corner, or by clicking on the word slideshow in the upper left corner of the screen.  The problem is that this new method has eliminated the ability to control the speed of the slide show by clicking on the screen during the slide show.  I don't know how I accidentally changed this setting, but I would like to restore.  Please answer me to my e-mail sent, I want kept secret - thank you for the ideas, you might be able to provide!

  Steve 2002tii

  Hi Steve,.

  Thanks for posting your question in the Microsoft community

  I understand from the description of the question, you lost the slide show button in the Windows 7 photo viewer. I'll be happy to help you on this question.

  Let us try the following methods.

  Method 1: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: I suggest that you want to run system restore to the date it was working fine.

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  After trying the steps above suggested, giving us the results. If you are able to solve the problem. or know us additional troubleshooting results.

• Windows 7 has changed after the Automatic Updates - screen resolution may not change back

  Last night was automatic updates from Microsoft.  Today, the resolution of the screen and the icons are huge.   Tried to change the resolution of the screen through Control Panel but can not find the same as before.  I tried to adjust the zoom level on Chrome but now everything is long and lean.

  Tried to do a system restore, but it has a red x next to it and will let me not turn it on.  How to restore my resolution wallpapers and icons to their previous size etc?

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• New update of Windows Vista has changed the display including the taskbar settings

  Last night, my computer is kept up-to-date on my computer that I did not authorize.  I am running a virus scan.  I do not notice any difference (in fact, the computer seems to work better), but the taskbar like Windows 98.  I spent under properties and tried to change the theme, but only classic Windows is available.  Please tell me how I can change my taskbar.  It is quite annoying.

  I also had this problem, the problem disappeared after a second reboot immediately after the update. I hope I could help

• Windows 7 has changed my location from network to network 2. I don't have it...

  Some how changed Windows my computer network he says now I'm on network 2. Now my Microsoft Media Center do not see my network HDhome Run tuner. How can I return this return to the original network?

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Windows updates has changed color and appearance of my taskbar.

  October 15, 2010, my laptop installed 9 updates up-to-date, I am running Vista to #6 with service pack 2, also Explorer 8.

  This has happened in the past and I'm back to a previous restore point.

  If anyone has reported this problem and update is the cause?

  If anyone has reported this problem and update is the cause?

  Install 1 update, followed by the next to see the update is the cause.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Windows Update has changed all my settings

  I use Vista professional in the United Kingdom.
  On the Windows automatic installation of todays updates (9 December 2009), I saw that all of my custom settings "disappeared" - including e-mail accounts, web browser, the place where all the documents, start menu, etc. !!

  I tried the system restore to go back to the time before the update, but it dose is not complete successfully, the message "unknown error."

  How can I uninstall the update or quickly return to my settings, please help.

  Hi Emyrshah,

  Welcome to the Microsoft Answers site.
  Try to do a restore Vista DVD system.
  To restore the system from DVD
   
  (i) to start the computer from the Windows installation disc
  (II) Windows will automatically run the disk is empty, and will load the files; This can take some time. Windows Vista Setup will begin charging.
  (III) now, select your language, time and currency Format installation, as well as the type of keyboard, once you are happy with the settings, click on 'NEXT' to continue.
  (IV) the next screen click 'Repair your computer' to continue. Windows will now search an Installations of Windows.
  (v) on the next screen select the operating system on which you want to do a repair. Select it, and then press 'NEXT' to continue
  (VI) you are in the menu "Recovery Options.
  (VII) in the "Recovery Options" menu select "SYSTEM RESTORE".
  (VIII) the menu "Restore files and settings" is displayed, click 'NEXT' to continue.
  Now in a 'Restore Points' selection select one that you want to restore too. Then click "NEXT" to continue. You are now given an option to restore the other disks as well as the operating system drive. If you have no problem with them, then just restore the main drive.
  (IX) now you need to confirm the restore point. Click "FINISH" to continue or "BACK" to select another drive or restore point. You are now prompted one last time to confirm that you want to continue. Click 'YES' to continue or 'NO' to select a different drive or restore point.
  (x) 'System Restore' will boot now.

  System Restore will now restore files, finalize the restoration.
  Once this done, tell whether she succeeded it, if so click "RESTART" to restart the computer, if it's not then try a different date.
  Once rebooted and you get on the desktop, you will receive a confirmation of the success of restorations. Click 'CLOSE' to continue.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of Windows Vista has changed format of tools/start bars.

  Updated Windows Vista installed today (Apr 28, 11). After restarting, the tools/start bar bar returned to the old gray Windows (classic?) format. I tried everything but can't retrieve the standard Vista graphics/format. The customization tool said that it is set to the Standard Format.  Antone have a response to that?  Thank you.

  Hi JohnMash,

  I suggest you follow the links provided and check if it helps.

  Why are some Visual elements will automatically turn off?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Solve problems with Windows Aero

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

• My function to create a folder in Windows Exp has changed to a Briefcase. help please

  I lost 6 hours of work trying to fix this and you can't do what I need to do until it is resolved.

  I can create is no longer a record.

  the only option I have is a case for sharing!

  Help, please.

  Hi Lanied,

  If I understand correctly, you cannot create new folders that you have only one option which is to create a portfolio.

  I suggest you follow the steps proposed by Linda Yan dated from on Monday, May 24, 2010 08:38 , the link given below.

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  After completing the methods suggested above, answer us with the State of the question.

• Mail of the window has changed

  Windows mail has changed recently. If I get an email with an attachment, there is no "paper clip" in the upper right corner. I must go to FILE then OPEN. Also the type of printing changed when there is FROM, TO and SUBJECT. It looks like something from an earlier version of windows. I have VISTA. Any ideas?

  "Recently that windows mail has changed."

  I noticed a different change: when the records are displayed as part of the screen now extends much further to the right, From/receipts/topic, section etc.  This change seems to have occurred in the last day or two.