Photo Viewer Windows 7 has changed?

Similar Questions

• Location of data by default Windows Update has changed and needs to be repaired.

  Original title: PROBLEMS WITH WINDOWS UPDATE LOCATION DATA; I have a windows vista IE 8 32 and 64-bit system.

  I can't get my windows update to automatically update. I used the "fix it" tool Microsoft and he finds issues and some fixed (as windows update components), but it wouldn't fix the other issue. It is said that the location of the default data Windows Update has changed and it needs to be repaired. The "fix it" tool would not fix it so I don't know what to do. There, any help would be greatly appreciated. Thank you.

  Hello

  Did you of recent changes to the computer that caused the problem?

  Method 1:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: We can use approach 50 / 50 to narrow down the root cause of the problem.

  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It will be useful.

• Photo Viewer Windows 7 causes my computer to freeze brand-new

  I just bought a Toshiba Portege R705 this week.  I uploaded 10 photos in the photo library, but when I open them with Windows Photo Viewer, the program has stopped responding and the computer crashes.  I tried to end the program with the Task Manager, but it does not work yet.  The only way to get the computer to respond is through a difficult stop (hitting the power button).    The problem has happened about a dozen times.

  When I opened the same pictures with Windows Media Center, everything works fine.

  I'm running the 64-bit operating system.

  Any idea what's going on here?

  Hello

  Follow the steps below:

  Method 1: Perform a system (SFC) scan files Checker

   

  SFC toolscans system files and replaces incorrect versions of system files by using the correct versions.

  Learn How to use the tool File Checker system to resolve missing or corrupted on Windows Vista or Windows 7 system files

   

  Method 2:

   

  Start the computer in a clean boot state and check if the problem persists.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

  In addition, Open event viewer and check if there is no meaningful error messages and codes related to the issue.

  What are the information contained in the logs of the event (Event Viewer)?

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen.

  Upgrade of Windows 8 has changed my graphics card driver, & now I get vertical bars on the screen, sometimes flashing. It is sometimes difficult to use the screen, especially when it has a dark background. It is a HP Desktop quad core with card Nvidia GEForce 9600.  I tried to roll back the driver, but that didn't help. I assume that the driver I need is no longer available. I also went to Nvidia to try to find a better driver that would eliminate this problem, but no luck.  Before, this came with an update on Vista, & I could correct in the way to roll back the driver. Any help would be appreciated.

  Go to www.nvidia.com and download the WHQL 306,97 drivers updated successfully.

  With the installation of Windows 8, Microsoft provides only the "bare" minimum drivers in order to complete the installation of Windows.

• Windows photo viewer - unknown error has occurred

  original title: windows photo viewer

  I use windows 7, 32 bit, Viewer photos and receive frequent and "an unknown error has occurred" when you try to rotate the images.

  Is there a patch or a fix for this annoying problem?  Many users complained about this problem, but I don't see a solution.
  Thank you

  Right-click on the file and click Open with,

  Click on the painting,

  See if you can rotate the file there.

• How to configure Photo Viewer Windows as a program by default when viewing photos

  Using the default windows photo viewer

  My pictures are being opened in internet explore. I want to open with the windows photo viewer. I tried "open with...". "and select Photo Viewer. However it is not. I however it manifests when I right click and select Preview. I don't want to do this every time see a picture well.

  So, what can I do?

  Hi PFollansbee,

  It seems that the file association to open the images has been changed on your computer. I suggest you to set as default Photo Viewer to access photos on your computer and check if that helps you solve the problem.

  Try the steps below; It could help us solve the problem.

  1. open default programs by clicking the Start button.

  2. click on Control Panel, and then click default programs.

  3. set your default programs. This option allows to choose the programs that Windows uses by default.

  4. Select Windows Photo Viewer in the list and click Set this program as default.

  5. try to access photo and check if it opens with the Windows Photo Viewer.

  Also access the link below to find out how to define and modify your default programs.

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photo Viewer Windows will not start

  My windows photo viewer has recently given the error code that it wouldn't start.  I tried to solve the problem by running the sfc/scannow.  The result: protection of resources Windows found corrupt files but was unable to remedy.   The viewer still does not start.  I Systime of operating disk that accompanies it by computer, but there is a warning on the disc, saying that the resettlement will erase all data and files from the hard drive.  All of the suggestions.
  Another photo program stopped working as well as the windows photo viewer.

  We will see if there is a problem with your file system.

  Go to start / accessories / Control Panel and right click on command prompt and click Run as administrator.

  Type sfc/scannow (Note space is inmportant) and enter and let it run.  It will scan and fix some of your system files.  If all goes well it will finish without error (let us know if it ends with errors, it cannot be resolved) then try your programs and see if they work now.

  If this does not work, try a repair/upgrade to systems level by bootiing on your CD of the OS.  Here is a link to some pointers on how to do it: http://www.vistax64.com/tutorials/88236-repair-install-vista.html. If you have SP2 installed on your system, you must first uninstall it for this process to work (and then download and reinstall when it's done). It is a much more complete repair process the command sfc (and may take a few moments).  Then again your programs.  If you have still the problem is probably with the program and not with Vista - and we can work on solutions so that if it becomes necessary (or refer you to another Vista forum that specializes in installation programs).

  Good luck. I hope this helps.

• Error when you try to view the image with Microsoft Photo Viewer: COM Surrogate has stopped working

  When I try to post a picture (JPG) with Microsoft Photo Viewer, I get "COM Surrogate has stopped working"

  I don't have Nero or DivX installed, which is what all the forums seem to indicate the cause of the problem.

  Can you suggest anything?

  http://www.howtogeek.com/HOWTO/Windows-Vista/fix-for-COM-surrogate-has-stopped-working-error-in-Vista/

  The above information on the problem is explained in the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Some JPG files in Photo Viewer Windows crushed to a fine line

  Hello. I just bought a new Dell XPS8000 with Windows 7 Home Premium 64 bit preinstalled system.   When I saw the files using the Windows Photo Viewer, they are crushed to a horizontal line about 5 pixels thick.

  Exactly as described here, in fact:

  http://Forum.NotebookReview.com/showthread.php?t=444102

  
  

  Anyone know a solution?

  
  

  The computer has an nVidia GeForce GTS240 graphics card.

  
  

  Thank you.

  Hi Willm25,

  (1) the issue is only with JPG format files?

  (2) was - it the same way since the installation of Windows 7 or has she started towards the end?

  3) saying: "some files using the viewer of picture Windows they are crushed down to a horizontal line about 5 pixels thick" you mean that the issue is not with all the images in JPG format also?

  Not sure of what exactly is causing the problem. Now I would say allowing you to run a file system (CFS) Checker scan and see if it finds corrupted files.

  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  http://support.Microsoft.com/kb/929833

  Let us know if that fixes the problem or to further support on the issue.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photo Viewer Windows showing as negative images and then print negatives

  Hello

  When I right-click on a JPEG file to print from the Windows, the preview of the image photo viewer appears as a negative, and that's how we print.  It is irrelevant, I'm trying to print on printer.

  I searched everywhere for a solution, someone came across it, and do you know how to fix it?

  Thank you!

  Not certain it's the same problem, but I can reproduce a similar effect as follows:

  Once the "print images" window with the overview is displayed, click [options] (lower-right). Click on "color management". Click [Advanced] tab. make sure that the settings are correct.

  For example, by changing "Device Profile' to 'Agfa Swop Standard', I can get an effect similar to the one you describe.

  Whatever it is, it may be useful to check the parameters on this page. Mine are all listed as "System default (xxxxx)" where xxxxx varies according to the category.

  Not sure, but it could be useful.

  If this isn't the case, after return and someone may have a better suggestion.

• Is there any photo reliable consultation programs, Photo Viewer Windows will not show photos

  IS THERE A FREE UPDATE OF THE WINDOWS PHOTO VIEWER, IT DOES NOT SHOW MY DIGITAL PHOTOS. ARE THERE OTHER PROGRAMS TO LOOK AT A PICTURE WHICH WILL RECOGNIZE ALL FORMATS OF PICTURES? ANY HELP WOULD BE APPRECIATED. IT IS A PERSISTENT PROBLEM. Thank you.

  Did you installed Windows Live Photo Gallery?

  It supports several formats, including RAW files.

  Windows Photo Gallery has native metadata management and tagging support and the Windows Imaging Component being extensible, it can organize and see any image format for which a third party WIC codec is installed. By default, it can view the images JPEG, BMP, PNG, TIFF and HD Photo , so that video

  http://Windows.Microsoft.com/en-us/Windows-Live/Photo-Gallery-get-started

• downloads window appearance has changed - how do I restore?

  Download window works OK when in full screen but when in a minimized window, the appearance has changed, so it is impossible to read what is there. How can I restore it to original settings?

  You have any addons/extensions that can style it somehow? Go in Addons > Extensions (and appearance), and watch well everything that can change the window display mode. Change the options accordingly.

• Photo folder "Windows explorer has encountered a problem and needs to restart" and I cannot access any of my photos.

  Windows Vista and, recently, I scanned a few photos and now my pictures folder won't open and gives me an error "Windows explorer has encountered a problem and needs to restart" and I can't access any of my photos.

  Hi LuiMTX,
  

  This problem is only limited to the pictures folder?

  Method 1: Let flow the fixit available in the link below and then check

  Windows Photo and slideshow problems
  http://support.Microsoft.com/GP/windows_photo_and_slideshow_diag/en-us?EntryPoint=lightbox

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the File System Check
  ER tool to troubleshoot system missing or corrupt files on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• rotation buttons can be selected in my photo viewer Windows

  Rotation of photos
  My rotation buttons can be selected in my photo viewer program Windows.  They are not selected.  Any suggestions?  Not download correctly?

  Right-click in the photo on the page of thumbnails and rotate.

  Otherwise, right-click and select properties and look for problems of permissions with your username.

• How can I removed the Photo Viewer window, also I have my Gif. go to my pictures?

  I have Firefox Windows 7,

  I would look at the settings of firefox with downloads of this nature.

  Or enter manually the where you want them to go every time.

  Windows Photo Viewer is not listed in uninstall a program or windows updates or turn on or off windows features.