Registration of trade mark

Similar Questions

• Is it possible to cascade two systems of Community trade marks?

  Hi have the following installed:

  * Manager CTS

  * CUCM

  * 1 x CTMS in South Africa

  * 1 x CTMS in Ghana

  Is it possible to cascade two systems of Community trade marks so that all devices in Ghana connects to the a Community trade mark and all appliances in South Africa to join the South African CTMS and then connect the two systems of Community trade marks between them?

  Hello.

  Yes it is possible,

  Please take a look at this link

  http://www.Cisco.com/en/us/docs/Telepresence/multipoint_switch/1_9/design/guide/nwmp_preface.html

  Marius

• Short Oracle ATG Web trade mark

  Hi all

  I use Oracle ATG Web trade 11.1 and I installed short inexperienced Manager. I was wondering is it possible, perhaps composing ATG that allow querying records short? I want to extract records as JSON in some business logic component. Does anyone know how can I do this?

  Hello

  It is something like this (just an example):

  ENEConnection connection = new HttpENEConnection (MDEX_HOST, MDEX_PORT);

  Query UrlENEQuery = new UrlENEQuery ("", "UTF - 8");

  query.setNavNumERecs (100);

  here to set any other desired params

  ENEQueryResults resultQuery = connection.query (query); run the query

  With this code, you can start your development.

  It will be useful.

• Community trade mark as well as TMS in a demo

  Hi all

  We followed demo in our office:

  CUCM 8.6.2 <->SIP trunk to VCS 7.02

  CTS1300

  TSM 13.1.2

  C Codec

  Of MXP

  1.5 CTM (will be updated at the latest)

  Is it possible to us in a CTM 1.8 with TMS 13.X DemoLab?

  I have now run successfully TMS with CUCM with the BBFRR (on the CTS also on the Codecs it) works very well, very well.

  Any input appreciated.

  Thank you.

  Best regards

  Georg

  Hi, George,

  As long as you have CTS-Manager and TMS manage planning meeting for the different endpoints, which should work.

  CTS - Man 1.8 will be able to discover endpoints that you saved to CUCM 8.6.2, and you can manually add those that are registered in the VCS; but remember to avoid setting up 1 end point that will be managed by the CTS - Man and MSDS.

  Kind regards

  Johan

• I'll try to find the right program for my project, I just invented it a design with the United States Patent Office and I need my logo in order to obtain a trade-mark. Two things I have to add this logo on the product I have on my computer and I need to b

  I need a program that allows me to design my Logo, also the product that I invented, I need to be able to put the logo on what I have in my computer. The logo is the overlap of 2 letters which I have on my computer and the word of this logo at the back of my product. I don't know what program would help me to do so. I was thinking about the color of cs6 Adobe illustrator, but not sure.

  Hi Chicky,

  Looking at your statement, Illustrator should be the best program to work with, if you need to be a vector art, otherwise you can use Photoshop as well. Please see the links below for some basics of Illustrator:

  Tutorials Illustrator CC | Learn how to use Illustrator CC

  Illustrator tutorials | Lynda.com

  How to design a crest logo | Adobe Illustrator CC tutorials

  Kind regards

  OM

• Registration of razor marks (cs4)

  I was wondering if there was anyway to display a text file or an xml file that lists the time of each razor cutting in a sequence. In my business, we need to bind the medical readings to Visual stimuli, and it takes a long time to record the start and end of each segment by hand. Is there a way to automate that CS4?

  Impossible to resist play: the works of the edl.  It will give you the timecode source and output and sequence timecode.  You can open in excel and take what you want.

  You can also select each clip on the timeline, create a subset, and then select all in the bin of project and export a list of orders (capture).  What gives only the time codes of the source clip.

• Error of registration marks

  Hi all

  Have a book A5 page size which must be printed at a professional printer, with registration marks.

  I select an option for the registration of marks, but when the book is printed the error message of "check marks will not fit on printed paper" appears. When you look at the information in the user guide, it is mentioned that there are cases in which the printed page should be scaled down, so that the registration of the marks must appear on the page. This will scale everything, which would be a problematic solution. How do you define a page size that takes into account the marks?

  This document is created at the FM of 7.2 (Windows XP), distilled with Acrobat professional 7.0.

  Thanks a lot for the tips on this issue.

  Donna

  Have a book A5 page size which must be printed at a professional printer, with registration marks. I select an option for the registration of marks, but when the book is printed the error message of "check marks will not fit on printed paper" appears.

  What is the flow of the print job, and more specifically, what page size you set in the "printer setup"?

  When rendering to PS or PDF with regs, I suspect that the size of the logical paper must be set larger than the page size of the FM document.

  How much more, I don't remember not to have needed to do this in the past 10 years.

• Problems with the registration of the CTM to CTSMan

  Hi all

  Is there a constraint of time return on registration of a CTMS to CTSMan.  We have 2 CTMS on Slough, United Kingdom and the other in Ohio, United States.  Our CTSMan is also in Slough.  The Ohio CTMS base seems to be okay at the beginning, but then the errors appear where CTSMan said Community trade marks could not authenticate.   The credentials are correct, so my suspicion is that CTSMan expects that there will be a recognition of the Ohio CTMS fast he is received (the round trip time is 109ms)

  What sounds right?  What is the recommended method to resolve this problem?

  Sincerely, Glen

  Hi Glen:

  If 109ms is RTT of the Ohio CTMS CTM in Slough, which should be good.  Finally, I checked the default deadline for registration was two seconds.

  In your CTS-Manager, you have your servers of CTM is entered with the IP address or host name?  CTS-Manager/CMTS is configured with specific DNS servers?  CTS-Manager/CTMS versions (I assume you're in 1.7 or 1.8 on both)?

  A more common cause of what you describe is lack of DNS. Make sure you have your DNS servers configured to solve for the CTM in Ohio, in addition to the MLC to Slough.  Periodic audits are are on the Community trade mark and of Community trade marks.  It is in Chapter 8 of our of CTS-Manager Install/Admin guide:

  http://www.Cisco.com/en/us/partner/docs/Telepresence/cts_manager/1_7/Admin/ctm_instalCTS_M.html

  You can issue "utils network host" from the CLI of the CTS Manager, and "utils network host the CLI of CTM to see if either fail to solve.»

  "Configuration of DNS for before name resolution is required for CTS-Manager and all servers configured in the CTS Manager.  All server names can be resolved by the DNS of CTS-Manager and CTS-Manager server name can be resolved by DNS to all other servers. »

  Also, make sure that the appropriate ports are open between the CTMs and CTM (if the servers are secure and it is a new installation, I would definitely check this). Here is the list of ports:

  http://www.Cisco.com/en/us/partner/docs/Telepresence/security_solutions/ctss_app_a.html

  If neither of the above seem to be the issue, then a TAC case may be a good idea, so we can take a look.

  HTH-

  Tina

• Dynamic Mark® registered

  I am trying to add a registered trade mark (circle around a r) in a dynamic text file. I use Flash 8 but am publish for Flash 7. I tried just doing the key command and also by typing in the html code for the trademark of r, but nothing is working.
  
  I'm new to text dynmaic areas so any help would be greatly appreciated.
  
  Thank you!

  Thank you, Tom!

  As long as all glyphs are embedded, the code works great.

• Employee free registration benefits through self-service

  Hi, please help me with this. When an employee enlisted in benefits through Self Service during the open registration period, is the registration method always registered as 'E' for explicit as opposed to a ' for the default value in the table BEN_PRTT_ENRT_RSLT_F in the ENRT_MTHD_CD column? Any help is appreciated.
  
  Thanks, Naveen Gagadam.

  Hi Mary,

  Yes, registration method is described as "E" every time unless registration is automatic for which he will be 'A' or default for which it will be done "."

  Note that D does not mean that the choice was a default choice (which also means) but that registration was created by the default registration process.

  Ex: Medical - only employee is a default choice for all employees.

  Employee A going on self-service and fits in all the plans of his choice but chooses to keep MEDICAL - employee only. The registration method is marked as 'E' E

  B the employee never goes to self-service. The default registration process affects the default choice MEDICAL - used only to the employee. The registration method is marked has '

  hope that helps.

  Kind regards.

• How to create a service mark in Dreamweaver?

  I need to create a service mark in Dreamweaver. I checked on the basis of knowledge and character cards I could find only to copyrights, TM and trade-mark.
  
  If it is not a keyboard shortcut, how do you create in Dreamweaver? I tried the tag < sup >, which is used for the aforementioned characters.
  
  Any suggestions? Advice? Tips? :^))

  I think that you might forget the closing tag. It should look like this: ^SM

• BRANDING: Dynamically change the icon of the Application and App images

  I want to be able to my trade mark application such that the icon of the application depends on the Registrant and/or some download settings - and thus limit the build that I maintain in a single generation.

  For example, someone downloads the application of a link to company X, so that when it is installed on their smartphone there the icon title and app for company X.  The icon and title vary according to the download (perhaps through the query string values).

  Is this even possible, and if not is - can anyone think of another approach?  An idea I had was to have the user to enter a record value which would cause then a different resource file take effect, but do not know how is there to take to do this.

  Take a look at 'net.rim.blackberry.api.homescreen.HomeScreen', he could not do what you want, but it can change the icons and the names of your application.

• Good afternoon. Please tell me if firefox for windows phone?

  Good afternoon. Please tell me if firefox for windows phone?

  No, there is no development in this direction - when everything is available on WP who is called "Firefox" then it is not genuine and probably a trade mark infringement which must be reported to https://www.mozilla.org/about/legal/fraud-report/

• How can I set up access on iPhone os 9.2.1, 6 more

  Any help with this would be appreciated. Thank you.

  Ask Siri or the voice command to dial a contact?

  http://help.Apple.com/iPhone/9/#/iph3c993cbc

  ...

  Use Siri or voice command. Press and hold down the Home button, say "call" or "dial" and then say the name or number. You can add 'at home', 'work', or 'mobile '. See trade mark applications and voice control. For example:

  "Mobile call from Emily.

  "Call the fire department.

  "Remember this number."

  When the voice dial a number, speak each digit separately - for example, "four five five, five, five...". "For this area code 800 to the United States, you can say"eight hundred. »

• My LEGO is flat...

  attempt to create LEGO-dust or sort of LEGO explosion.

  The brick is made in one minute (see preview screen Center), but when I do the group a cell particle is "flat":

  

  Although 3D, looks like it turns only around an axis... (??)

  tried various settings - no hope.

  Someone at - it advice?

  Sorry, but the way that you set it to the top will not work.  The 3D groups used as source for the cell particles get flattened, it has always been thus.

  By example, if you have 3 circles separated on Z in a 3D group and create a transmitter out of this group, the source of the cells still gets flattened, you don't actually have a particle composed of 3 circles of offset. You get a particle of cells that are flat, but the transmitter can project them in 3D space. For text 3D, if you use the object text 3D (single layer) as the source it will provide no flattened in the transmitter.

  That said, there is an "easy way" to do this and hard a way. First of all easy:

  1. set up your "Trade marked building block" in a group and Center it in the group.

  2 animate the rotation on two of the chains of the Group (X / Y for example).  I used the behavior of rate with slightly different values.

  3 export this output as a movie, and then import it into the movement.

  4. use the film as the source of the issuer. Make sure that the random boot image is checked in the settings of the transmitter.

  -You may need to adjust the rotation speed. I used this method to create particles of blood cells in the past and it worked fine.

  Pros: Simple configuration works in most cases. Faster and better performance.

  Disadvantages: Not true 3D, you must perform a new rendering of the sources of the cell if you need to change the items.

  90% of the time that this method will be good enough.

  Here's the hard, but it has limits (I'll get to those).

  1. in a new group, create your basic "box" using text in 3D. Using the commands to set layer transformation origin (Center of the world) on XYZ, is visually very well.

  2. based on the Properties tab, move the anchor point for the box originally as well. Check the position of the top, front and one side. You can reduce the opacity to see the grid in 3D.

  3. now, create a new text layer object to be the 'peg '.

  4. use the rotation settings in the appearance tab text to get the ankle facing the correct direction, associated with the box.

  5. move the layer 'peg' in the right position related to the area using the 3D transformation controls.

  6. once in place, select the layer and again move the anchor point toward the center of the world.

  You have now two objects which will have all created transformations effectively from the same point. The shared location of anchor is essential to make it work.

  7. Select the first box and create a 3D with that issuer.

  8 copy the random start in the control of the cell value. You will need it for each post.

  9. drag the layer peg on the transmitter, which will create a new cell.

  10. glue the random seed value in the box, the cell in peg.

  Here is where I would test the basic settings.

  IMPORTANT: THE VALUES IN CELL OR CHANGES NECESSARY TO EVERY CELL AND MATCH FOR ALL THE CELLS IN THE TRANSMITTER.

  For each cell in the change in the rate of birth to something low (I used 2) so you can see what is happening.  Reading and verification of the animation. If everything is configured correctly (original anchor point points are at 0,0,0 in the values of the world, random seed for the match of cells) that you will have the pegs that stick to the boxes.  If things don't stick you probalby have problems with the anchor positions (they do not match) or values of cells.

  Once you have set up the first peg and know that it works, you can add extra pegs by using the previous steps.  Then check that the anchors are centred and correspond to cell values. for each cell in the transmitter.

  So here are the limits.

  • Easy to break delicate installation (but not too bad).
  • If you wish the transmitter to turn cells, they will turn only on a single axis (z).  You can work around that, by linking the rigging the rotation of text object layer together values and then animate these on another axis, as Y.  However, this will affect all cells in the transmitter, so things a still fairly uniform.  To work around this problem, you can duplicate the text layers, create an another particle emitter with a few shifts (birth rate, direction of rotation, speed). When played together, they will look more random.

  Again, the most important thing to get this second method works is paired things (anchor points, the layer changes, cell parameters). Knowledge of the rigging/link can help.  FWIW, this configuration can also be much more intensive treatment depending on the purpose of text how he takes and create the number of particles, your mileage may vary (this is why there is the easy way).

  Good luck!