Registry error indicates ChromeHTML should be ChromeSHMTL. What should I do?

Similar Questions

• Get performance and slow registry errors in Windows XP

  The artist slow system, application crashes, etc.

  * Original title - any information you can give me about the Windows XP registry errors? *

  Hello

  1. what questions do you have with the registry?
  2. meet you experience slow performance, the application crashes with Internet Explorer or use all the applications installed on Windows XP?
   
  Follow the steps mentioned below and check if that helps:

  Step 1: Check in SafeMode with network.
  Follow the link below to find out how to start your computer in safe mode with network.
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Step 2:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. click Start, click Run, type msconfig.exe Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

• I have more than 250 registry errors, what should I do?

  I did a scan of my registry and found that there are 257 errors here. What would you do? Would you use one of the registry cleaners from the net or what. I find that I cannot defragment because the process stops short, informing that the files are unreadable.

  I and many experts in these forums will tell you that the registry cleaners usually do more harm than good. They often claim that correct registry "errors" that simply did not matter. To try to resolve the 'mistakes' unimportant they can often cause havoc on the PC, causing either that it doesn't work properly or at all.

  Registry cleaners don't consider as a panacea for your computer problems. If you have a specific problem, are looking for a specific answer. People in these forums will be happy to help you.

  As for your question of defragmentation, try a disk check. See:

  Windows 7: http://windows.microsoft.com/en-GB/windows7/Check-a-drive-for-errors

  Vista: http://windows.microsoft.com/en-GB/windows-vista/Check-your-hard-disk-for-errors

  XP: http://support.microsoft.com/kb/315265 .

  Back up your data on a separate drive until you start as a precaution.

• Computer has been great, but now running slow, hot and almost 50% registry errors. What is going on?

  Computer will have 2 years in April.  Had no problems until last week when it crashed.   Could not get going by the restoration of the State of origin.  Now runs very slowly and has very high CPU usage.  Internet often stops.   Fan runs all the time, I think (tried air compressed for the first time and has not solve).  Discovered that I have registry errors almost 50%.  I tried CCleaner for free and did not help.  Any suggestions?

  Hello

  ·         Since when are you facing this problem?

  ·         Using internet connection wired or wireless?

  ·         What operating system is installed on your computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Install the latest drivers and check if the problem persists.

  Method 2:

  Run the troubleshooter for Internet connections and check if the problem persists:

  a. click the Start button, type "Troubleshooting" (without the quotes) in the Search box and then click Troubleshooting.

  b. click network and Internetand then click Internet Connections.

  Method 3:

  If the previous step fails, restart the computer in safe mode and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  You can also follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• What is the best way to correct the registry errors without the use of a registry cleaner in XP?

  I am sorry to raise this issue that so many people who have asked me.  I read pages and pages of discussions on the MS forum on this subject, and without exception, all the experts said Microsoft registry cleaners are completely unnecessary and that junk in the registers has no performance impact at all.  Instead, they say, to do x, y and z.  I am running Windows XP on my desk for five years, and gradually, he got so slow it's almost unbearable.  It takes 10-15 minutes just to start, and sometimes it takes 2 minutes or more just to open a window of browser (IE8) or go to the previous page by using the arrow to the left.  Before you tell me all the things it could be, please let me say that:

  1. my PC has not always been this slow!  It is getting worse.

  2. all my Windows software is up to date.  I have automatic updates on.

  3. I have a lot of disk space, almost 75% of free space on a hard drive of 80 GB.

  4. my PC is free of viruses, spyware and Trojans.  I have McAfee antivirus running and I also sometimes run Malwarebytes and Trojan Killer, because they always find things that don't have McAfee.

  5. I defragment my hard drive on a regular basis.

  6. I regularly delete all my temporary files by using the Windows Disk Cleanup utility.

  7. I have very little, if any "Add-ons".  No toolbar Yahoo or Google (or Bing!).

  8. I removed nearly every program that I start, so that they are not running in the background.

  9. I uninstalled all the programs that I don't use.

  However, I still have a slow ever-more computer.  Sometimes, when I see ads on TV to increase the speed of my PC, I download the 'free' software, and they claim to find hundreds or thousands of "registry errors.  When I look at the newspapers, I see many entries in registry for 'Netscape' and 'Google Earth', which I uninstalled years ago, as well as entries for the videos that I downloaded, seen once, and deleted a long time ago.

  So, what's the problem?  If it's not related to my registry (which Trojan Killer says has more 6 000 entries!), what else could be?  I would appreciate greatly any advice you can give, because there are dozens of companies on their touting their registry cleaners and the uninstall (for a price) programs, and after reading reviews of the MS MVPs, I'm skeptical of their claims.  Thank you.  :)

  I can't disagree with a lot of things have already been said.

  I'm willing to accept that your machine does actually takes 10 to 15 minutes on the clock. It's completely absurd.

  Some people call your "Windows Rot" problem. Becomes just the slower windows over time. It is a collection of things that are happening in the background. Yes I believe that the register contributes. Using a registry cleaner is not a "magic" solution But it can help a little.

  The PC care program/process you described is above average.  I suggest you add CCleaner. Disk Cleanup is not bad, CCleaner is better, cleaning of other stuff which does not resemble the DC. It won't be a significant difference because disk space is not your problem, but it will help a little.

  'Play' with the registry is VERY risky. If you decide to go ahead, I would say that first make you a copy of the full image backup using a utility that can be started and run from a CD/DVD. Just in case the registry cleaner breaks of your machine.

  Registry cleaners is that they take a "best estimate" to what is no longer necessary. Sometimes they think wrong. And each vacuum cleaner will clean slightly different sets of places.  If the tool does not provide a way to back up the registry before you start cleaning, do not use it. He is not careful enough.

  If vacuuming offer 'levels' of cleaning, enjoy. Open for more aggressive cleaning, with resetting and long series of normal use between cleanings.

  You are looking for a tool which also makes registry "defragmentation". The registry is a database that get disorganized by additions and deletions. Defragmentation will be re - organize and get rid of a 'lost' space, making it the smallest file, afterwards faster to read.  It is not something you need to do frequently, but since you've never done it in 5 years, it would help, after cleaning registry.

  Another place to find CPU and RAM wasted resources is Windows Services. These are small programs that start at boot time. They run in the background and provide support services to all applications or specific applications.  Many applications services are running even though you don't really need them. You can find information on which you can set by Googling for 'Windows XP hardening'. There are a lot of sites with good information. They call it hardening because by disabling unnecessary stuff, you leave less possible openings for the "bad guys" to the attack.

  Ultimately, I think your best bet will simply bite the bullet and re - install windows and all your applications. It's the best way to restore your computer to almost any performance fees factory. (It is not exactly factory fresh because you need to add a ton of Windows updates).

  Before you re-install, do copy image 1 or more full backups. At least one must be done using a tool that will easily allow you to extract the files. You data backup files separately to make it easier to restore the reinstallation. IE, copy it to a USB key.

  Many "experts" actually expect to, and do, re - install windows every 6-12 months!  I think it's a bit exaggerated, but they swear by it.

  Once you do your re - install, create a copy of the magnified image
  Install a firewall application (before the windows updates)
  Once you do all updates of windows, create a copy of the magnified image
  After that you re-install all your apps, create another copy of the complete picture.

  In this way, in the future, you have more current points to restore your computer to. It will reduce the time you spend to get back to the current configuration.

  On a 5 year old XP machine, you have probably 512 MB - 1 GB of RAM. You might also consider taking in the shop (or DIY) and bump the RAM up to at least 2 GB or better still max out.  The current versions of the applications use much more memory than they did 5 years ago. Even XP will be since he has been seriously corrected since then.

• When I restart my computer, I get this message error loading C:\windows\pxtdmap.dll, what should I do?

  Error loading C:\windows\pxtdmap.dll, what should I do?

  Hi Nancy,.

  The error message says anything else? Just, based on

  "C:\windows\pxtdmap.dll", I am unable to find a possible solution.

  The error message contains more information or could look you in your system event viewer to see if there is a more detailed error message there?
  http://support.Microsoft.com/kb/308427
  It would also be possible to use the system restore utility to restore your computer to a time where you did not receive this error?
  http://support.Microsoft.com/kb/306084

• No history except the 2 update, I installed last night. What is a registry error?.

  When I go to windows update it tells me that no update was already installed. The update history page is white, except for the 2 updates, I installed last night. Update said earlier I have all the updates that are installed and there is no new update. I went to the windows update log in windows system 32 file and it lists all of my updates to the current, but will not display the update on the page history. I have hundreds of updates in the win sys. 32 journal update. This me puzzled because I'm savy on most windows problems, or, at least so far, I was able to fix most of the windows over the years since 2007. Am running Win Vista Home Service Pak 2 and all the other stuff seems to be ok except windows update. No history except the 2 update, I installed last night. Microsoft security essentials courses and a fix windows 3.5 way way back.  What is a registry error?.

  Original title: update windows

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  that includes "0x8024402C".

• Impossible to install Lotus SmartSuite 9.8.2, access to system registry error and should then stop error.

  Original title: loading lotus smartsuite in windows 7

  Loading lotus smartsuite 9.8.2 in windows 7 I get the error message ' access to system registry error and should then quiting error. "

  Hello

  The problem is specific to the application?

  If the problem is specific to Lotus SmartSuite 9.8.2 I'd contact the IBM Lotus SmartSuite support for assistance. Consult the following link:

  http://www-947.IBM.com/support/entry/portal/overview/software/Lotus/Lotus_SmartSuite

• Hi, I can not update my photoshop, I cc 2015, it indicates an error U44M1P7, I don't know what to do, can anyone help me?

  I have the cc 2015, it indicates an error U44M1P7, I don't know what to do, can anyone help me?

  "Installation failed" error U44M1P7 with Adobe Creative Cloud or updates of Adobe Creative Suite 6

• I installed my own copy of Lightroom 5 to 5.7. Now all files I try to develop gives me a message "there was an error working with this photo. What should I do?

  I installed my own copy of Lightroom 5 to 5.7. Now all files I try to develop gives me a message "there was an error working with this photo. What should I do?

  Thanks Tanuj

  My fault. I restarted my computer and everything is still OK

  Thanks again

  Paul

• Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent, Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. BU

  Hello. I bought the cc (2014), updated to the cc (2015). I continued to pay. but I can't update. It gives an error that does not license! What should I do? urgent.

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I got the error message error video compilation that follows? What should I do

  I got the error message error video compilation that follows? What should I do

  Export with the SOUL. Open Preview and watch the encoding until it fails.

  This is the place on the timeline, you need to fix.

• Cannot install the security update. Received error Code 0 x 643. What is it? What should I do?

  Attempted to install

  Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353).

  Not successful installation: received error code 0 x 643.  What is the problem?  Where can I find information to solve this problem?

  Thank you.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Use the foregoing as guides to solve the problem.

  If necessary:

  Click on the following link to download the .NET Framework cleanup tool:

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  You can use this to check what versions are actually installed on your computer:

  The user guide for the .NET framework installation check tool
  http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

• What are the registry errors and are they more than a gadget?

  I hava a 2 year, HP laptop, XP Professional.  I get the e-mail promising fix registry errors and make my computer faster and more efficiant - it seems a bit "drasggy", these products work? Is there a free source for the same thing?  Thank you very much.

  Registry cleaners fix errors without importance offering significant benefits and this can create unsolvable system, errors that cannot be solved by reinstalling Windows and all that cause.

• I can't send mail errors come to the top, but what are they abd that should I go?

  Every time I try and send an email from windows live, a box pops up saying error that I don't know what they are, or who to ask.

  Hello

  E-mail for Windows Live Mail are questions in different Forums to them.

  Here is a link to Windows Live Mail portal. There is a list of Forums on the right side for you to repost in:

  http://windowslivehelp.com/product.aspx?ProductID=15

  See you soon.