RegSvr32 error code appears when I start Windows 7, 64-bit version
This is the second time that I posted the problem as he took the time to see where the error occurred. After testing, it was found that the pop up error code would be almost every time that the computer had been turned off and restarted.
Is the error code appeared: "RegSvr32. Module: 'C:\Users\Jim\App.Data\Local\GjpgPack\instrument.dll' could not be loaded. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files. The specified module could not be found. »
I would like to know how to solve this problem and if this error code is an indication that my hard drive which is about to fail. The computer was functioning normally.
Appreciate any help you can give me. Jim
Is the error code appeared: "RegSvr32. Module: 'C:\Users\Jim\App.Data\Local\GjpgPack\instrument.dll' could not be loaded. Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files. The specified module could not be found. »
Use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
If you look at it, it should be under this yellow color
Yellow color
In case if you can't find using the above methods, it might be under
taskschedule ===>Scheduler task library. If found delete the entry for the Task Scheduler Library .dll file
Tags: Windows
Similar Questions
-
My MS DTCconsole program stopped on my computer, and this error message appears when I start my Windows Vista 64 Ultimate edition. Can anyone help? Yiannis54.
Hello
The exact error message would have been very useful because it may be Malware.
It may be a legitimate program.
http://support.Microsoft.com/kb/174381
http://www.fileinspect.com/FileInfo/MSDTC-exe/
Would that be it: "MSDTC Console?
And can be malicious:
http://www.bleepingcomputer.com/startups/MSDTC.exe-15826.html
It can be a boot entry remains of this Malware.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after the scan post back or if it was malware take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
Windows update 80070246 error code appears when you try to update
Above the week windows latest update update fails and displays the error code 80070246
Any suggestions how I can fix this problem in Vista.
Thank you.
Twiggo
Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/9478210 X 80070246 - ERROR_ILLEGAL_CHARACTER
An invalid character was encountered.Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0 x 80070246.
http://support.Microsoft.com/kb/942968 -
52D error code appears when you try to install windows updates
Error Code 52D and it will not install my update
Reset Windows Update components:
http://support.Microsoft.com/kb/971058Otherwise, go to the Download Center microsoft and download the manual to install the update package using the number of the update and install it on the computer.
-
Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.
"enginemanses" wrote in message News: ec6aa35b-f44e-4514-8f56-25c025c76ebd...Running XP SP3 tries to install Microsoft.NET Framework 1.1 Service Pack 1 update it still not and I get the error 0x66A code. Could not find an explanation anywhere for this error code.
http://support.Microsoft.com/kb/923100 can help - even if the error code is different.
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
I get the error code 80070005 when you download Windows updates
Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005
When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB
Hello
1. what day you're talking about?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Step 1: Put the computer to boot.
Click on the link below
http://support.Microsoft.com/kb/929135
NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)
Step 2: Download and install updates from Microsoft Download Center manually.
a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.
d. When you are prompted, click open to install the update.
Microsoft Download Center
http://www.Microsoft.com/download/en/default.aspx
Method 2:
Run the Microsoft Fixit from the link below.
http://support.Microsoft.com/mats/windows_update/
Method 3:
Reset components from Windows Update from the link below.
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/971058
Method 4:
Follow the steps from the link below.
-
Getting error code 2146827859 when you use Windows Update
Running XP64 Pro. Windows Update > Message that IE32 must be open > process then runs receive error box showing "error code 2146827859 reinstalled IE8 (64) - but this has not fixed an error message."
Hello
The equivalent of 2146827859 is 0x800A01AD error code.
Perrform no the link mentioned below and see if it helps.
Note: "Check the title that reads" 0x800A01AD error code '
Hope this information helps.
-
How to fix error code 8024402F when upgrading from windows
When I update my windows vista, an error occurs saying code 8024402F Windows Update encountered an unknown error.
Could someone please tell me what is the problem and please tell me the steps of how to fix this.
If it has to do with a router, please tell me how to solve this problem with the router.Thank you
2. Windows Update, error 80244016, 8024402f or c80003fa
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80244016-8024402f-or-c80003fa -
error code 57 when executing that Windows update
I get the error code 57 and the 8024200d error code when you try to run Windows update
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d
If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error.Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
http://support.Microsoft.com/kb/947821If it's office updates maybe try to install office with the installation media updates in the installation drive.
-
How to tackle with error code 80004002 when I use Windows Update?
A message tells me that Windows Update was unable to update my computer. I go to Windows Update and I get the error code mentioned in my question. This code is not listed in the possible remedies.
Hello
Method 1:
Run the Microsoft fixit from the link below.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
Method 2:Follow the steps from the link below.
Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»
http://support.Microsoft.com/kb/956708
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7
-
Tecra S5-10 X: message always appears when I start Windows
I just just finished the whole upward to a + toshiba tecra s5 - 10 x + laptop.
Whenever I start windows the following message is displayed:
"Your computer is now ready to use. Please restart once to make sure that all parameters are correctly applied"
This message comes from a * toshiba guest window * and the only option that provides is "restart".
I usually turn this message by pressing alt + F4.
Could someone help me with this problem?
I got Laura for some help of toshiba in Greece and they suggested that I should format the laptop and re-install the product CD.
Thank you in advance!
In my opinion, this message appears because some applications settings have been modified and the changes are available after the reboot again.
But he s strange that this message appears every time after reboot new. It should not appear every time!How did you install the operating system?
Have you used the Toshiba Recovery CD? If this is not the case, this!Install the OS from the recovery CD and everything will work properly!
-
error code 80080005 when signing into Windows Live Messenger
I tried so many times, installation and reinstallation of Windows Live Messenger, but it seems that it is for me the same error code: 80080005... pls reply me as soon as possible... Thank you
Hi Castor2,
Since you are facing problems with Windows Live Messenger, you can post the question in the Windows Live Forum for assistance:
http://windowslivehelp.com/searchresults.aspx?query=error%20Code%2080080005%20&ProductID=2
Hope this information is useful.
-
It appears at the start of Windows XP:
[. ShellClassInfo] LocalizedResourceName=@%SystemRoot%\system32\shell32.dll,-21787
What should I do to fix the problem?
Found the answer: http://support.microsoft.com/default.aspx?scid=330132
-
I have a question that my computer is in danger. MS Fix - It was no help. I use Norton Security Suite, 'no problem' found. Try System File checker (SFC) tool system, unable to find amd or problem. I'm NOT an IT professional. Tried to clean boot, but all messages status did not help the. Thank you for your help.
Thanks Gerry, I am afraid that answer with your useful offer was beyond my capabilities, but has been informative.
I bailed out and contacted Microsoft Support, (first Phillipines to help Support level., then the India after "escalation of the problem on the technical level of two Support" this necessary pay for this help.) First of all, I have identified my several attempts to fix this next recommendations Microsoft Help searching for the various questions. It didn't work, but their identification has moved forward the process with Technical Support. Assistance remotely with them has accelerated the process, and the technician has also not had luck with some of these steps and tried a Reboot own without luck. Eventually, he used my installation for Win7Pro disk and performed a repair installation. This... Finally... was able to correct the problem, and update works now. Technician time total estimated at 1.5 hours, my time of 6 hours, including brief journal - for periodic sequential update facilities after the repair facility. I have now also now have one year of technical support and got some other goodies from Microsoft Access, (WiFi, Skype, 365, etc..)
I would like to know what percentage of others, following the advice of Microsoft Help, had a bit of luck fixing this error code. It would be nice if there was a "fix" seconded to Microsoft. Win7 is very stable and I want to use it for a while. Thank you once again.
-
What does the error code 80080005 when update of Windows Vista?
Just installed a new hard drive and the need to run the Windows Vista update, but the error message above is displayed. I did a complete analysis of the Virus and no known viruses have been detected.
0 X 80080005 CO_E_SERVER_EXEC_FAILURE
BITS service could not be startedFirst of all, make sure that no proxy server is causing this issue.
Click on the round to start, in the search field type cmd
Right click on cmd.exe and select "Run as Administrator". Accept the UAC prompt.At the prompt, enter the following command exactly as written including spaces and press enter
netsh winhttp see power of Attorney
If this message appears, type exit, and then press enter
Direct access
If a proxy is listed, then type the following and press enter
netsh winhttp reset proxy
Then type in the output, press ENTER to close the command prompt.
See if the system can update now.UTC/GMT is 18:28 Thursday, September 6, 2012Jose Antonio Ponton Posada CEO
Maybe you are looking for
-
Satellite A300 - order of installation of drivers for Windows 7
I installed Windows 7 ultimate on my laptop Satellite A300 - 1 5. I downloaded all the drivers for Windows 7 and I have a backup drivers in Windows Vista. * You can tell me please what order of drivers should I install? * (windows now works perfectly
-
Hi all I hope someone can help me. I hit a snag in my application programming. I have a table size 2D 8 x 20. These data, I need to display it in a multicolumn listbox. But I don't want to show all the data. From the user Panel will make the choice a
-
Hello: I am trying to write a code that works with other data in NTSF streams. Similar to this Microsoft makes This example . The attached VI is a simple example of code - open the second stream "metadata" and write something. However, open them VI L
-
I'm trying to update my itunes and it does not open because I don't have the quick time, well, when I try to download quicktime at the end it says there was an error, I have insufficient permission to C:/file...etc. Then he said: to make sure that I
-
For some reason, everything on my screen has increased in size. Start bar to toolbars of background etc. It is very annoying and I want so he can return to the normal size. How to make? [Windows Vista Home Premium 64-bit]