Regular expression help please. (extraction of a subset of the string between two markers)

Similar Questions

• RESOLVED: Understand regular expressions in search and replace - use it to replace everything between two comments

  I solved this by using the following regular expression in find DW and replace dialogue, it will be all the html on several lines between two specified comments:
  
  <!-NameofStartingComment--(.| \s)*?--NameofEndingComment-->)
  
  
  
  
  Hello
  
  I have structured my site in dreamweaver with each page between the comments section:
  
  <! - navBarStart - >
  HTML here
  <! - naveBarEnd - >
  
  I used this method because I wanted to be able to easily use the find and replace dialogue with regular expressions to update pieces of code throughout my site. However, I have real problems finding the correct regular expression to use.
  
  So in every page I have my <! - startHtmlSection - > <!-endHtmlSection-> between these two tags, I sometimes have different HTML. I want to find the regular expression I could use 'generic' of all the html to a find a replacement between two of my comments specified. Can anyone help? I googled and tried everything what is obvious (after you have selected the regular expressions in the find and Replace dialog) but DW never find the tags in the pages of sites.
  
  

  I solved this by using the following regular expression in find DW and replace dialogue, it will be all the html on several lines between two specified comments:

  Hello

  I have structured my site in dreamweaver with each page between the comments section:

  
  HTML here
  

  I used this method because I wanted to be able to easily use the find and replace dialogue with regular expressions to update pieces of code throughout my site. However, I have real problems finding the correct regular expression to use.

  So in every page I have my between these two tags, I sometimes have different HTML. I want to find the regular expression I could use 'generic' of all the html to a find a replacement between two of my comments specified. Can anyone help? I googled and tried everything what is obvious (after you have selected the regular expressions in the find and Replace dialog) but DW never find the tags in the pages of sites.

• A1 7 "help please. I want to calibrate the touch screen

  help please. I want to calibrate the touch screen and I get touch calibration failed. "my tablet is lenovo ideapad a1 7"

  Oppressed accidentally touch calibration and restart the Tablet, but it is now very sencible and just put my finger is selected. I can not hardly touch the screen

  Sorry for my English. am Latino

  
  

• Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  Downloaded Photoshop Elements, I thought, made me buy my code, then said that my code was not valid. Help, please. You want to use the product.

  you need a serial number and the installation file.

  the former, http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  the latest,

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• regular expression help

  Hello

  I have a string I want to use a regular expression to avoid a cascade of matching patterns, but I can't seem to make it work.

  The string:

  ^ XA ~ TA000 ~ JSN ^ LT0 ^ TEM ^ MNW ^ MTT ^ PON ^ PMN ^ LH20, 0 ^ JMA ^ PR4, 4 ^ MD0 ^ JUICE ^ LRN ^ CI0 ^ XZ
  ^ XA ^ LL0076
  ^ PW376
  ^ 25, 25 ^ FT25, 38 ^ BXN, 2, 200, 0, 0, 1
  ^ FH\ ^ FDP1000 ^ FS
  ↑ FT0, 56 ^ A0N, 20, 20 ^ FH\ ^ FDP1000 ^ FS
  ^ FT180, 65 ^ A0N, 42, 40 ^ FH\ ^ FD ^ FS
  ^ 25, 25 ^ FT150, 38 ^ BXN, 2, 200, 0, 0, 1
  ^ FH\ ^ FDP1001 ^ FS
  ↑ FT120, 56 ^ A0N, 20, 20 ^ FH\ ^ FDP1001 ^ FS
  ^ FT180, 65 ^ A0N, 42, 40 ^ FH\ ^ FD ^ FS
  ↑ PQ1, 0, 1, O ^ XZ

  I want to get out there is one instance of:

  P1000

  P1001

  In this example. The numbered part will be different for the other channels, like P4567, PA34554, etc. He will never vary from P or PA. The section number can be 4 or 5 digits.

  Each of these appear twice in the chain.

  The regular expression, I tried to use is:

  \^FD*\^FS

  and then I was going to eliminate duplicates.

  And now my brain doesn't give up.

  Tay

  This vi retrieves all P followed by numeric characters.  You need to change to include AP

  

• Help, please! Stop: c000021a {fatal error} the process windows logon system ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000)

  Hi, I really really need help. I have a Dell Optiplex 330 with windows xp pro. I tried to restore to an update of the service pack, and while he was complete I got this blue screen. I'm sure its a mistake with winlogon.exe. However, I don't know exactly what to do to repair or replace. I have my recovery disk. Help, please.

  I no longer need help. It took a little while, however, I was able to remedy. Yes! I'm not a computer expert or anything, but I've never needed the Geek Squad. However, I called almost done for this one. Laughing out loud. I'm so happy that I didn't have to reinstall the operating system. I have all my info. Yes! I keep large files so all my disks are always within reach. I was able to replace all bad files for registration through the recovery console.  Once you understand the computer language, the easier. There is hope. If someone needs information just ask.

• Formula of FormCalc to make the difference between two time fields if they are populated - help please

  
  Hello

  I have a laptop (TotalTime1) which refers to two other cells in the updated hour-shaped (Start1 and 1 to finish).

  The formula below is intended to make the difference between the time of departure and of arrival if they are populated.

  I had to work unconditionally HasValue, but the formula was calculated when there is no value in the Start1 and Finish1 (due to the time format).

  This is the code I have, it is said that there is an error of almost the last line; I'm sorry if I'm posting this in the wrong way, I haven't posted on this forum before but this is:

  If (HasValue (Finish1) and HasValue (Start1)) then if (Time2Num (Start1.formattedValue, "HH: mm") < Time2Num (Finish1.formattedValue, "Hh: mm")) then Abs (Time2Num (Start1.formattedValue, "HH: mm")-Time2Num (Finish1.formattedValue, "HH: mm")) / (60 * 60 * 1000) another 24 - ABS (Time2Num (Finish1.formattedValue, "HH: mm")-Time2Num (Start1.formattedValue, "HH: mm")) / (60 * 60 * 1000) endif

  Any help would be appreciated.

  Cordially Fetachini

  you need an another endif at the end (you have nested statement and only 1 endif)

• MeetingPlace Express - help please?

  Hi all

  I'm a MPE installation planning and research to import users via a CSV file.

  Unfortunately, according to

  (http://www.cisco.com/en/US/partner/products/ps6533/products_administration_guide_chapter09186a00805edd00.html#wp1069753) it seems that you need software installed in order to know which column headers are required.

  Whoever MPE would be so kind as to either make an export and send me the CSV file (without course modules) or let me know which fields must be in it?

  Thank you very much

  Stuart

  Hi Stuart-

  I have attached the info export file for the profile header and the file group. Just rename the .txt .csv. Here are the procedures in case you don't have them - http://www.cisco.com/en/US/customer/products/ps6533/products_administration_guide_chapter09186a00805edd00.html

  Just curious. We don't create users in MeetingPlace Express, rather we use CallManager CCMUserids via LDAP configuration in MeetingPlace Express. When the user connects to MeetingPlace Express for the first time, the profile is created automatically. Here is the link - http://www.cisco.com/en/US/customer/products/ps6533/products_administration_guide_chapter09186a0080579c97.html

  Refer to the section "requirements for user authentication to an external Directory." It's so much easier :-)

  Ginger

• Regular expression help numbers

  Hello
  
  I want an exact match of 9 digits or 12 digits, my query should give "No Match found" because the input value is actually 10 digits
  
  Select case when regexp_like (regexp_replace (' 123 4567 890 ',' '), ' ^ ([0-9] {9}) |) () [0-9] {12}) $')
  then Match "found."
  another "No Match Found"
  end test
  Double;
  
  Need help, I have to do something about something very basic, bad.
  
  Kind regards
  Ash

  Remove the 2 brackets:

  SQL> select case when regexp_like(regexp_replace( ' 123 4567 890', ' ' ), '^([0-9]{9}|[0-9]{12})$')
    2  then 'Match Found'
    3  else 'No Match Found'
    4  end as test
    5  from dual;
  
  TEST
  --------------
  No Match Found
  
  SQL> select case when regexp_like(regexp_replace( ' 123 4567 89', ' ' ), '^([0-9]{9}|[0-9]{12})$')
    2  then 'Match Found'
    3  else 'No Match Found'
    4  end as test
    5  from dual;
  
  TEST
  --------------
  Match Found
  SQL> 
  

• I can't open the pictures and need help please with my Windows Vista and the WindowsLivePhotogallery error Code: 0x8007007e. Carole

  I have a Windows Vista laptop with many pictures.  I can not open the photos on my Windows Live Photo gallery and have received

  Error code: 0x8007007e.

  How this can be solved?

  Thank you.  Carole

  This forum is for Microsoft Security Essentials.

  Please go to the Windows Live forum to get help.

  http://windowslivehelp.com/

• Urgent help please! AJAX does not have the BB8900

  Hello world

  in a big trouble... I have developed a very simple web application using Java, Spring, and AJAX. Connection on the success page, a form appears when the user must fill out and save later.

  As a number of selection lists (list drop-down combobox) should be used. Some of them are disabled for the first time, by certain actions (for example a field filler text or by selecting another list), the lists must be activated and filled using AJAX to a servlet.

  This works with PC, iPhone, with HTC (IE, Firefox, Opera...). But in BB9000 emulator and a device BB8900 I faced with the following problems (although I have activated JavaScript):

  (1) text fields are enabled to disabled correctly, but drop-down lists are not disabled.

  (2) AJAX does not, for example, select a city leads AJAX to the streets of this city.

  (3) DOM does not work... for example a button, no news... elements are added to a table in the form.

  Please help since my deadline is coming and I'm short on time!

  Kind regards

  Hello

  Strangely, I could make it work 'more or less' in the Simulator and the BB 8900 device. Worked on the version used:

  strlist.options[strlist.options.length] = new Option("Text 1", "Value 1");
  

  ??? I had to disable the javascript first, clear the cache, close the browser, reopen, enable javascript, and re-run the web application. Since there is no Javascript errors when you fill out the lists, DOM works very well.

  I couldn't make the dropdowns 'disabled', however, the list object is set to true 'deactivated' property until the debugger showed? Somehow, I can live with that for a while :-)

  Thank you all for...

• Help, please! Photoshop CS5 AND all THE OTHER PROGRAMS to CRASH!

  Hello

  So I have CS5 Adobe Creative Suite full on my iMac. I bought all of the programs in 2010 and the new iMac in 2015. Since I upgraded my iMac to the new OS (first Yosemite, then El Capitan) all my CS5 programs is high gel (aka crash) and I have to force quit them or manually shuts down my computer, or it will run smoothly, but when I go to exit the program, a window will appear saying that the program was forced to leave because he crashed (which obviously isn't the case).

  Why is this happening?

  I'm sure it's just a matter of my programs up to date are not enough to work with the newer operating system out there currently, which means I probably need to buy CS6, or unfortunately, I will have to pay monthly for these programs with this new creative cloud bs, but I wanted to check with others who know better, then I have.

  Someone please help! I tried to call Adobe and Apple about this but no answer or Apple puts all the blame on Adobe.

  I AM NOT happy that Adobe has NO phone or chat support with their technical team, so hopefully someone here will know what to do.

  Thank you

  Zach

  Hello Zach,

  Being in the Photoshop community, could you please post the report of accident for Photoshop here?

  Regarding the compatibility of Cs5 on OS X 10.11, see the Suite CS5 in OSX 10.11 El Capitan (Beta or future)

  See also El Capitan compatible with Adobe CS5? Apple Support communities

  Kind regards

  Assani

• Help, please! I can't select the shape I drew with the pentool again... I have the selected layer, but there is no sign of my new shape in my path Panel?  I have been sitting here for days literally and simply cannot make it appear the race that I created

  HI - can help I'm going crazy! !

  I drew a shape with the tool pen (which took me Age..) and I go back an image that I imported, I cannot select once again it.  I can see it in red, but I'm not able to select once again it.  I have the selected layer, but there is no sign of it in my Panel of traces at all.  I tried clicking on the direct Selection tool (about 100 times), I tried the Brush tool.  I've tried everything.  The same thing happened to me the other day...    Please can someone help!  Tania

  It's the plug technique on the subject:

  Using Photoshop | Manage paths

  It contains this point under manage paths:

  When using a shape or pen tool to create a work path, the new path appears as the work path in the tracks Panel. The work path is temporary; You must save it to avoid losing its contents.

  OK, the red, you mentioned is a Stoke you added. Then quick mask is not involved.

• Help please! I can't use the copy & paste!

  I just installed all my windows updates, and now I'm able to copy and paste anything in a word-processing document.  I get the message:
  "The information you copied exceed the size limit for pasting in text processing. Try to reduce the size of the size of your selection and ten copy and paste again. »
  Please could someone shed some light on this? Thanks in advance!

  There is a new bug in the system.

  Work around:
  Try to paste the unformatted text.
  (

  Edition > paste special... > as: [unformatted text] |) [OK])
  ||

• Help please! BACS4 can't find the local host on a brand new PER710

  Hello

  We just bought three servers Dell PowerEdge R710's in order to accommodate a Hyper-V virtual computer on each.

  We try to use BACS4 for ports network team together, say two for the virtual machine and two for the host operating system. However, BACS4 cannot access the BCM5709C Broadcom. He started with an empty node of the hosts. If you attempt to add a host using 'localhost' is an error immediately:

  "Cannot connect to host: localhost." Please check the network communication. »

  The program also fails to connect when I try to use 127.0.0.1: 1, IP address of the server and the name of the server. All these answers are answered, however.

  The possibility of discovering the hosts can't find something or the other.

  We have not much at all with the server other than to join her for our domain, allowing the DRC, installation of updates Windows, Symantec Endpoint Protection, and the Hyper-V role.

  It seems to me that the software BACS4 has been incorrectly installed or is not compatible with the network adapter installed on the server. I saw a few people on the forums of Broadcom, suffering the same thing but with no real explanation for the cause of this error.

  Anyone here had any experience of it and the best way to fix it?

  Thank you

  Paul Collin

  Sorry, I realized I probably put this on the wrong forum. I also managed to solve the problem by installing the latest version of the Broadcom management programs on the site of Broadcom. (v15.0.15.1 worked for me. v15.0.14.1 was the offending version that came with the server.)

  My apologies for the hassle! Feel free to delete this thread unless it is of some use also.

  Thank you

  Paul