Reinstall drive won't start no-Satellite L10

Similar Questions

• M30X bios does not detect the hard drive, won't start HD

  Can someone help me in this problem.

  My satellite m30x hard drive won't boot, rather trying to boot from the network.

  Tried to load the installer by default, and Hd will not appear on the settings

  tried original reistal toshiba software CD and the message that no target disk appears

  Is this really a hardware problem, some conection fisical damaged, or is it a bios problem

  Thanks in advance for some light on this problem

  My M30x has the same problem. I just used 2 months.

  I sent it to the repair center as I was told to do, because it has guaranteed.

  I'm still waiting for a response from them. I don't know what caused it.

• Re: Bios won't start on Satellite P300

  Hi, on my Satellite P300 does not start Bios.
  How can I restore factory settings?

  Hello

  I m afraid. I put t understand what you mean exactly
  You are not able to access the BIOS?

  You want to reinstall the OS and want to set the laptop to factory settings?

  If Yes, then try to boot from the DVD of recovery (if created).
  If you have n t try a recovery DVDs start the installation from the HARD disk.
  The new laptops HARD drive recovery and you should be able to reinstall the OS by pressing the F8 key-> choosing fix my computer-> Toshiba Recovery

  This should launch the installation of the HARD disk

  Check

• Windows vista completely crushed hard drive won't start after installing the packs of services and internet explorer 9

  Thought I did my brother a favor so that he was at work and installed service Pack 1 & 2 on its 32-bit vista operating system, and then installed internet explorer 9 and it crashed the entire operating system nothing work, hard drive, monitor, mouse nothing. I hope this isn't a hardware problem which needs the advice of experts, the guilty feeling like I had left him only someone help with this can not start even to the bone g .thanks

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• Need Driver wireless Vista for my Satellite L10 151

  Is there anyway to know what driver I need for vista 32 bit. I've already upgraded to Vista!

  Help, please
  :)

  Hello

  I checked the Toshiba download under http://eu.computers.toshiba-europe.com page > support & downloads. Select your laptop model and you will find all the drivers for Vista 32 bit. WLAN driver is also there.

• Windows 7 won't start on Satellite L650

  Hey,.

  I went to turn on my laptop this afternoon and windows does not start. I get the loading screen animation, but nothing happens. When I restart, I get the option to repair windows - but when I go in, all I get is a black screen with a white cursor.

  I tried the following:
  -Switch on my computer and now the F8 - nothing happens, I just get to the screen asking me to repair windows or start normally
  -Engraving of windows Recovery Center 7 on a CD and it works - nothing happens, black screen with white cursor
  -Turn on the computer while pressing the 0 to get to the system recovery - again, nothing happens. The black screen, white cursor.

  It is only 3 months old so it is still under warranty, but I prefer not to have to take it to a service center because I need for work, and I can't do without it for more than a few days.

  Any help or advice would be appreciated!

  Thank you

  > I guess now, my question is - why is this happen?
  Who knows things boyfriend arrive simply because on no apparent reason
  But although it works again

• HP Pavilion DM4-3105tx: HP Pavilion DM4-3105tx after the upgrade to 1 TB HARD drive won't start not and cannot get into the bios

  Hi all, just need help on my portable DM4 after replace 1TBHDD and unable to start and enter the bios.

  Help, please.

  Thank you & appreciated

  

• Satellite P300-156 won't start or by MAIL

  Hello

  I have a Satellite P300-156 I bought a few months as damaged. The screen has been damaged and the case slightly cracked. I replaced the screen and hard drive and main card seems to have no physical damage. I've been running this system for 3 months now without any problem but, today, for some reason, it won't start or even POST. It powers on and the CPU fan starts to turn then stops and does nothing. No display (I tried external). CD player works. No beeps.

  I tried reinstalling RAM even open completely and reinstalling all connections, nothing done. Does anyone have an idea what component is gone? (CPU/GPU/RAM)

  Any help would be greatly appreciated

  Thank you

  Did you update the BIOS or something?
  For me, this is a normal behavior when the BIOS chip is faulty.

• Satellite L10 DVD Super Multi Drive - E/s of entry Error Message

  Does anyone know why, when I try to play a CD or CD-ROM, I get a box saying i/o error of entry?
  I have a Satellite L10 with a DVD super multi drive. It can read DVDs and DVD ROM

  I thought maybe it was a cable connected the drive itself, but if it's that I need how out of the car and how to support.

  I tried updating the driver and uninstall it then reinstall the drive, but I still have the same problem.
  Cannot use the accompanying software as is all the cd.

  Please can someone help me.
  Thank you

  Hello

  In most cases the entrance of e/s, error message is related to a hardware malfunction (CD/DVD drive).
  The readers of the lens laser can not calibrate properly and therefore it can not read the CD inserted.
  These errors are not uncommon and occur mostly after a long period of use due to a material stressed.

  But let's check the last possibility of solution;
  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Then, restart the computer and check if it of possible to read CDs.

• Satellite L10 151 does not load XP or drive recovery

  Hello

  I have a model of Satellite L10-151, and he won windows load t. Whenever I have try and run it, it says operating system not found. When I put the Toshiba recovery disks in that came with the laptop and I also bought a windows XP disk this load t won either.
  I also took the hard drive and put one in and it works fine it should be the hard drive but don't don t no what than the other.

  I also tried to install windows 7 that doesn t work either: s

  Help, please? The HARD drive has everything on it.

  Hello

  > I also pulled out the hard drive and put one in and it works fine it should be the hard drive but don't don t no what than the other.

  You can enter the BIOS (f2) to check if the hard drive recognized? It seems that your hard drive is fine, but it may be something wrong with the motherboard connectors.

• 'Bad Machine' error when I start the recovery on Satellite L10 media

  Hello...

  I have a Toshiba Satellite L10-103 and I want to make the recovery, since I have constant errors and my wireless does not work.

  When I put on CD, everything is ok, I press F12 and get the choice when I want to access computer. I select the CD/DVD drive. That produces the recovery starts and I get this error message:

  "Wrong Machine! This software is designed for personal computers TOSHIBA '

  What's wrong with it?

  Hello

  Are you sure that the recovery CD you are using is designed for Satellite L10 - 103 to 110%?
  Please check this!

  But if you use the same recovery CD that came with the laptop, and you still get the same error message, then the false DMI information that is stored on the motherboard might be responsible for this error message and might prevent to recover.

  This can occur if the motherboard has been replaced and that the technician has not updated the DMI string.

• Satellite L500D won't start

  Hello

  My Toshiba Satellite L500D won't start.

  When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

  I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

  I hope someone can point me in the right direction

  Buddy

  Hello

  Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
  It will be interesting to know what you did with your computer laptop last days.
  Have you installed some day or anything that may be responsible for the issue described?

  Update the BIOS maybe?

• Satellite L30 PSL33E won't start at all - the LED blinks 6 times

  Hello

  My poor mother is quite upset! Its Satellite L30 PSL33E just died.

  It completely off and now won't start at all.
  Orange light flashes six times when you press the power button.
  No hard drive, fan, screen or any other noise / activity.

  She tried without the battery.

  A kind of hardware failure, I guess.

  Any ideas what this blink code means?

  Thanks in advance,
  D.

  I put t know what the code means, but you can read it. short means 0 and 1 long

  In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
  Why?

  because what is really hard to fix a motherboard for laptop very s.
  It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

  I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(