Reinstall ESXi 5 after updates

Similar Questions

• I need to reinstall Lightroom plugins after updating Lightroom 5 to 6 of Lightroom?

  Hello

  I use Lightroom 5.6 and have several plug-ins installed. It's filters, Nik, Photomatix, DxO Optics Pro and DxO Point of view. I would switch to Lightroom 6 or creative cloud. The new version of Lightroom would automatically recognize and treat the plugins installation or I need to reinstall one by one?

  Thank you.

  AT

  When I moved from Lightroom 5 CC of Lightroom the Nik plug-ins were in place. I have a print utility provided with my printer that does not transfer automatically. But even if it was necessary was to copy the folder in the Lightroom 5 folder to the new folder Lightroom CC. I can't speak for all plug-ins because I don't use much.

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• After updating firefox, pages load correctly with windows 10

  Okay so after I upgraded to firefox with my windows 10 update, everything was fine. but lately I have had problems with some sites Web does not. so after updating firefox to its default settings, I uninstalled and reinstalled nothing works correctly in firefox. Since I did the update its maddening that nothing does not load. I have attached a picture of what look like my web pages. I tried to help, but everything is messed up on the pages. can someone help me with this?

  There are security software such as Avast and Kaspersky that intercepts secure connections and sends its own certificate.

  If you have Avast then try disabling the analysis of HTTPS in the Web Shield, Avast.

  • http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/
  • https://Forum.avast.com/index.php?topic=176073.0

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.
  Check which is the issuer of the certificate.
  If necessary, you can attach a screenshot that shows the display of the certificate.

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Firefox does not not on Windows 8.1 after update to 32.0

  For the last three versions 30.0 and 31.0 32.0 Firefox does not work after update on my laptop Windows 8.1. I tried Firefox reset State by default, uninstall and reinstall and reset my TCP/IP stack (which usually fixes the problem). I also went to Internet Options in IE 11 and unchecked the auto detect settings in the options of LAN connection and then checked again without success. I also have Chrome installed on my machine to check to see if it is in the browser or my internet connection.

  Internet Explorer 11 is the only browser that works so something seems to be wrong in Firefox.

  I discovered that my Norton Internet Security firewall blocking the new version of the program. Chrome has recently developed automatic updated also and I think too, it was blocked.

• Cannot open after update to v 30.0

  I run Windows 7 and cannot open Firefox after update to v 30.0. I uninstalled and reinstalled several times without success. I do, however, show: firefox.exe * 32 in the section of the Task Manager processes. No browser opens and the only way to "kill" for uninstalling I did was to "complete the process"; Right-click on the icon in the bark of the task and clicking the X did not a thing.

  Anyone else having this problem?

  It would open in safe mode, but when I tried several times, it will sometimes 2 or 3 tries to work, with each attempt showing the firefox.exe. * 32 under the Task Manager processes. I ended up resetting Firefox and it now opens normally - I have to rebuild my extension library, etc. Thanks a lot for your help! I really missed FF!

• After updating FF 30.0 - unable to process shipments on USPS. com after connecting usps acct

  I can't connect to my usps. com account, but after update to 30.0 FF, I am unable to process a shipment. I am able to enter all the info (sender/expedition/type/date/insurance pkg shipping address) and when I try to "add to cart" - I get shots back ask my delivery date. Any address including the shipping date or delivery that I use I use or what type of package selected - I am unable to deal with the shipment. I clear my cache on a regular basis. I could process a shipment today via (gasp) Safari. I, unfortunately, stayed on the phone with USPS. com t/s, but they could not provide advice other than to empty my cache. Any ideas?

  Mac OSX 10.9.3
  FF 30.0

  UPS ships a web form that you fill out, once connected to an acct? Short in Firefox form fill data, it looks like a conflict between the site / form & Fx 30. Not unusual.

  Fx start in safemode and try w/o addons, plugins. Arranges, you'll need to create the new profile & reinstall each, a couple at a time - check the operation of the site after each.

  If safe mode does NOT correct it, I would be completely uninstall Fx Control Panel, starting with the latest version from the list, then restart, then uninstall the next most recent, etc, restarting after each uninstall.

  Remove remaining program files Fx - all records of Fx.
  Reinstall a new copy of Fx 30. Before you install, close every single thing that you can, including any AV / FW - everything. Disconnect the web during installation.

• 10.11.5 update fails, the system crashes after update

  iMac 27 "end 2015, SST 1 GB, 32 GB of RAM

  After update 10.11.4 via App Store 11.5 system hangs on commissioning, all programs seem to have disappeared (they are still on the drive, but cannot be started). Tried to reinstall 11.4, works fine and all is well. Reinstall the update brings back the problem. Cannot start in safe mode. Tried to download the full OS x and install it, same problem as with the update. Not yet tried a clean install.

  someone has an idea to solve this?

  I have exactly the same problem. Unfortunately I do not have a Time Machine to return to backup.

• Firefox will not hold, but shows in the Task Manager, after updating graphics drivers from AMD 13.1.

  Hello

  After update for drivers AMD 13.1 on my 5770, Firefox will not launch; It doesn't, however, appears in the Task Manager. I want to emphasize that it will boot into Windows safe mode; When I opened it in safe mode, I used this time to deactivate all plugins, modules, extensions and created a new profile. This did not help. I also tried launching Firefox in its safe mode and had no luck with that either.

  I encountered this problem once before, when trying to upgrade to an earlier version. I think I was moving from 12.1 to 12.4, but I'm not 100% sure of that. In the end, my solution was then to retrograde back to my previous driver. The steps mentioned in the previous paragraph has not helped at that time, not do a complete reinstall.

  experience of 15 years, and that computer repair baffled me.

  Thanks to all those who might be able to help.

  Eventually the relevant specifications.
  Windows 7 Ultimate x 64
  AMD Phenom II x 4
  Ram 6BG
  Chart AMD 5770, running catalyst 13.1

  See here

  • https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• After update to FF12 - use of the cpu, slower and unresponsible

  Nothing new - he had year ago and I couldn't fix it. Now, the issue is back. Firefox after about 10-20 minutes starts to work slow awfuly. Like, goes to a small number of new tabs makes good unresposnible a few seconds, the browser does not respond to what that it either, typing is 'invislbe' and only appears after a few seconds, then there frozen again for a while, as all scripts on the newly opened site needs good two seconds for himself. At that time, the uses of FF upward at more than 25% of my CPU (AMD Phenom 955 BE - 4 hearts, 3.2 GHz with 8 GB DDR3 RAM). And it also affects the whole system - everything is "stuttering" FF is doing. And it appeared that after the upgrade of FF11 to FF12 - similar thing that's happened in the last year, when I had to completely re - install the whole browser after update. And now, I'm new here, too tired to even think of clear all, completely new installation FF and import all the stuff.

  I tried to reinstall soft, started in Mode safe mode with disabled modules (same thing, after some time, the "suttering" occurs), clear memory cache, re - install Java (which seemed to help a little). Any ideas what the hell is wrong? I don't want to create a new profile and move everything - I want my current profile over to work as it should. I'm really tired of who - I am also using Opera and Chrome (I am a developer web, so I need them), but I like FF the more, but with this problem occurring over and over again after a while, I really think to give up Firefox.

  My problems were related to the addon of all in a sidebar. Which have been set by the last update.

• I can't delete cookies after update from version 9.0.1, also the opening, I have 2 new cookie files that disappear at the close of FF.

  I have uninstalled/reinstalled 9.0.1, is the same thing. Check my profile, cookies.sqlite is if FF is closed or uninstalled. When installed and opened, I have 2 new files, wal - cookies.sqlite and cookies.sqlite - shm, as well as of cookies.sqlite. Is this the reason why I can't delete cookies? Also, I and enabled AdBlock Plus and the navigation of private life. After update, I can't post anything in support of FF (this is my 4th attempt, Safari finally used to post) and files under Tools, as clear history are accessible, I shouldn't have a history to remove.

  (1st edition)
  Ok. I reinstalled FF 9.0.1 Safari, but not directly from Mozilla. I used CNet, now things work as they should. I have no cookies listed, except those I want. Private browsing does not work correctly. However, I still have these 2 additional cookie files; -wal-shm.

  (2nd edition)
  I spoke too soon. After accessing sites that I frequent, the 'ad' cookies are back (adbright, realmedia, 247realmedia) and cookies from the site are eliminated, only not here, spent. Now I can't connect to anything and am back to Safari to access the Support Forum of FF. Have I not a bug? Someone please help, I'm desperate, I hate IE, Safari, Chrome, etc. They have neither the level of ad and pop elimination - up that Firefox has; and they don't have the level of customization that Firefox has. 2 additional cookie - wal-shm files, are always there when FF is open and disappeared again the closure of FF. One last thing, I noticed, I have a request of support for Chrome file in my library. The cookie file Chrome could interfere with the FF cookies? I do not think, I have Safari, as well, and no browser has ever interfaced with each other before.

  (3rd edition)
  I have uninstalled/reinstalled FF, all my modules and also tried to delete the cookies.sqlite document in the FF profile file, nothing happens. I counted, there are 14 sites listed in preferences > privacy > pane show Cookies (no pun intended) and they are all sites of "ad". These sites are also listed as sites blocked in Adblock Plus. Until a person pick up, I give up, I don't know what else to do. He there was that the only time that cookies were gone pane show Cookies, every other time I have uninstalled/reinstalled anything, they were still there. So, until someone can help me, I'm stuck. The only thing I did is removed altogether-profile file. It's the last thing I want to do, unless I can save my favorites somewhere to return after reinstalling. If this is not corrected in the next few days, I can just try, too.

  I think I solved my problem. I activated the safemode, then activated each Add on, one at a time, reboot FF between each activation. I don't have the add-on TACO. I hope this is the end. Thank you for your response. I appreciate it.

  Little puzzle, this particular post was not the first in which I posted this question. However, it is the only one that I thought was actually posted on the forum. The first two attempts, I thought had not displayed. Today, there are all the posts with the same problem. So, I really thank Mozilla for their patience and all the people who have taken the time to read this and the other two positions. I apologize for the repeated messages. I really didn't know that they had been posted because I couldn't find their afterwords to edit with my attempts to fix this problem.