Reinstall the host character

Similar Questions

• License on the host character error

  Hello, I test the host character on my MAC preview and pops up the following error message:

  "Licensing failed because an active installation after effects CC 2015 could not be found. If please reinstall After Effects and launch it to sign in the creative cloud. »

  Already reinstalled After Effects and the problem persists, what should I do?

  

  This will help you to character animator license problem

• When the host character come out?

  When the host character come out? I very After Effects this week and were reported by Adobe personnel on a cat that AE contained host character - but it's not. Thank you.

  Soon.

  Mylenium

• Illustrator puppets to the host character - issue of stroke

  Only, I finished my puppet and imported into host character, but a problem with a stroke.

  Some features (one to be precise) is not resized like all other traits, and I do not know how to solve this problem.

  I am posting the screenshot just to be more clear that I can

  the 3 first screenshots are:

  view from the front in illustrator

  

  Left profile in illustrator

  

  Right profile in illustrator

  

  all strokes have the same weight and as I noticed they are automatically resized by the host of characters adobe.

  
  

  everything is ok on the main view (view from the front in character animator)

  

  
  

  but the stroke occurs I turn face (keyboard triggered)
  

  as you can see, it looks good with the exception of only one on the nose which is not resized.

  

  What should I do to fix this?
  pls don't tell me to extend to all the games on illustrator... I would like to avoid this...

  Sorry for my bad English, I'm not motherlanguage.

  Thank you

  Alberto

  OK, I found why I had this problem.
  The problem was on the contour options

  Each shot was
  

  with the exception of this single trait which has been
  

  then they looked basically the same, but they were not!

  Thanks anyway
  You can close this post!

  See you soon

• Is the host character included with a subscription to creative cloud?

  The icon "Ch" is not listed as a downloadable application on my computer?

  Ch is installed with After Effects.

  If you want to open Ch, go to the drop down file in After Effects

• character animation freeze on ' opening 'project host character.

  Whenever I have try and open the host character, it freezes with a transparent window on the top that says "opening"project host character. I tried to update, connection, disconnection, uninstalling and reinstalling. The same problem. I'm on a PC with an Nvidia graphics card.

  Turns out be the device we use, a playstation from Sony cam. We got another webcam, and it worked fine.

• Follow-up on host character of the face

  Instead of the automatic face tracking, select the hotspots? I have a beard, and he sends the crazy face tracking. Then I make the track just my eyes, eyebrows and lips points, down my chin also?

  Test us the algorithm of tracking of face with the beard, but if your beard is very epic and covers your facial features, it may indeed hurt.  Adobe After Effects has also built-in face tracking technology and can be used with pre-recorded images.  This would allow you to treat the source of the layer film and mask areas may struggle with, or use of other people's videos.  Face data followed in After Effects can be pasted into animation character as a registered pick, as if you have saved the data directly within the host of character.  More information and tutorials for the face of Adobe After Effects tracking feature can be found here:

  Use the Face Tracking in After Effects | Tutorials Adobe after effects CC

  And here:

  Face Tracking in After Effects

• For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder?

  For applications, hosted on a private server, users have to reinstall the application to see the updates to the App Builder? Let's say that I was updating a banner of right or a library style...

  If you change the .zip offline banner or a library style that is part of a .zip file that you specify in DPS App Builder, then Yes, you must change the app and make it available for users to update. But if you change the style of banner or library that is hosted on a server, the changes appear immediately without any modification to the application.

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• LabView RT versionconflict between the host and target

  Hello everyone,

  for my diploma, I work with a compact system in rio (cRIO-9074) with two I/O-modules. After some research, I created a small project which includes an fpga - and a host vi. I wanted to test my project, so I've compiled the fpga vi and you want to run the host-vi. But then I got an error that said that the versions of the software LabView real-time between the host PC and target (is the cRIO-controller meant?) are different.

  As a solution, I was told to check versions and reinstall the software Real Time using MAX. Now my problem is that I don't know where I can check the version and/or how I can solve the problem to get the project running.

  I added the errorwindow (in German) as an attachment.

  I hope you can help me.

  Better subject.

  Schu3

  MAX is measurement and Automation explore National Instruments.  Open, then expand "remote systems".  You should see your cRIO system.  Expand and you will see 'software' in the list.  Right-click on it and choose to install the software.  That will open a window that will allow you to select what software and what version to install on the cRIO.  Install the version of LabVIEW that matches the one that you use for development.

• LaserJet M1536dnf: Impossible to change the host name on HP LJ M1536dnf

  Hi everyone;

  I'm changing the host name on our printer that is currently Imprimante1 that's not what I'm looking for (I have no idea how it was change or not at all).

  I tried to access the printer via IP in a browser (tried Chrome, IE and Edge) still occur. I see the host name to the title of the network, however, I am not able to change it.

  I also thought I might be able to install the software and use the Toolbox, except that during the installation, the Toolbox links are created in the start menu, but it is never installed (confirmed uninstall reinstall twice)

  So yes, here it is...

  Anyone have any ideas on the issue?

  See you soon,.

  Do not know your printer exactly, but on most of these when you go to the web page, you must go to networking and you will need to go in which change you the method of how it gets ip address or an ip.  On this screen will be the ability to set the IP in a manual address and the area that contains the host name you should be able to click on it and change the name.

• When I turn on my Lexmark printer, I get a message saying that the host process (Rundll32) windows has stoped working

  I had trouble trying to use the system scan on my Lexmark printer. I have uninstalled & reinstalled the all-in-one Lexmark & now I get a message saying windows (Rundll32) host process has stoped working. Please can you help solve this problem.

  Concerning

  P. J.

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to contact Lexmark printer and check.

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

• 'The host 'POP3' could not be found. Check that you have entered the server name correctly. »

  Original title: "e-mail mistakes".

  Recently, we lost all of our information on our laptop and have had to reinstall Windows and unfortunately we lost data, emails etc.

  We are still after the reinstallation, this error to come (see below) when e-mail messages are downloaded.  Don't know what to do at this point, really need help.

  The host 'POP3' could not be found. Please check that you have entered the server name correctly.
  Account: 'POP3 (1)', server: 'POP3', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

  "Trust" has written in the new message: * e-mail address is removed from the privacy... *

  Hi Bruce, I'm setting up account e-mail again, as for the mail server, in my opinion, bigpond is our mail server.

  I found a better link for you:

  http://BigPond.custhelp.com/app/answers/detail/A_ID/12611/kW/Windows%20Mail/SNO/1

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Connectivity problem of virtual machines the host is rebooted.

  We restarted our esxi host and after reboot, we receive questions, with the connectivity of virtual machines hosted on that particular esxi only.

  The problem is that some virtual machines communicate on the network and some are not.

  There are two hosts in the cluster, if move us the virtual machines on another host, virtual machines are running well.

  The host has the same configuration with respect to the physical networking and configuration of virtual networking is concerned.

  ESXi version: 4.1

  You mentioned that host network configuration and good host network configuration problem is the same.

  Issues appeared after reboot the host, and until the battery has been replaced.

  I guess that something is wrong at the physical end itself.

  Is that possible, that you can stop the host again and obtain reinstalled network and power it turn it on again and test it.

  Because when the battery change is done server is put out of the rack, so I'm assuming that n/w card were not seated correctly. I have faced this kind of problem once and I did the same thing and things worked well for me.

• vCenter vCSA unit lost, how to install a new one to take control of the host?

  Hello

  Due to a disk failure, I lost the VCSA control 2 guests. Now I manage the VMs entering each host separately.

  The backup did not work, so I want to reinstall VCSA 5.1 again.

  I read that the first step is to "unpin" the hosts of the VCSA.

  Is there a procedure for this operation? I want to reinstall and take control of the hosts and their virtual machines.

  Will this affect virtual machines running settings? new device "reads" the current configuration?

  I supported the VCSA configuration, but I think that it is not reliable because this time we made changes directly to the guests.

  Thanks in advance

  given that the old vCenter isn't available.

  and as you said that you are able to connect directly to the two hosts, so there is no locking mode either. nothing should be done 'Dismantling' part of it.

  Just prepare your new VCSA, connection inside once the configuration is successful using the vi client or web, create new data Center virtual

  and start adding hosts, the two hosts will be added without problem.

  New VC will be able to reset the account vpxuser password as part of the welcome add treat yourself.