Reinstall the software of F4400

Similar Questions

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• My battery drains quickly, even with all closed applications.  Tried to reinstall the software, that it recharges, completely let die battery then full recharge.could would be a bad battery?

  Battery drains quickly, even with all closed applications.  Tried to reinstall the software, restart hard, even by putting

  profiles to return to factory settings.  I might just have a bad battery?

  Try several batteries, saving tips. First thing I would try is background App Refresh function.

  Battery Saving Tips for your beloved iPhone

• Reinstalling the software on DV4-1028us after Win8 Vista upgrade

  If I upgrade a DV4-1028us my wife from Vista to Win 8, will I still be able to access the recovery partition to reinstall the software?

  Hi jcmclean,

  It depends on how you upgrade.  I'd take a glance at this document before the upgrade, which should answer other questions you may have as well.

  Remember, more than likely HP does not go to the material support for W8 on any system purchased before October 1, 2011.  Most of the pilots of W7 works in W8, but not sure about Vista.

  You can run the software from the upgrade wizard, which will scan your PC and report on what is currently installed on your PC is compatible with the W8.

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  I hope this helps.

• Cannot find "automatic detection" to reinstall the software pre-installed on my desktop after installing win7

  I did a full install of win7 from vista on my hp Pavilion a6250z desktop which has deleted my preinstalled software that came with the computer.  They told me to go to hp and run detection system to reinstall the software, but after a lot of research were not able to find auto-detection. Any ideas on where should I look for?  Thank you!

  What we call "automatic detection" can be found HERE. The only thing he finds some drivers and install some software updates for your original Vista. HP no longer provides the software pre-installed on their Web site.

  My experience is that if you have created your HP recovery disks when you got the computer or just before you did a clean install of Windows 7, you should be able to find most of the original software on the discs. Insert the HP recovery disc in the DVD drive and navigate to the folder "HP". In this folder should be a file 'Drvr' and a file 'Apps '. You should be able to find the software preinstalled in the "Apps" folder Note that some programs may not work correctly because they were not designed to be used with Windows 7.

  Frank

• Can not reinstall the software on g85 all in a reinstallation of printerwhen g85

  While trying to reinstall the software, I received a message 'Cannot start' Java Virtual Machine cannot be loaded. Class not registered. Therefore the program does not install.

  Reinstalled again and this has worked, sorry

• LaserJet Color MFP M175nw 100: Cannot reinstall the software to update driver (after having uninstalled by following the instructions on the support page)

  My ability to scan stopped initially with the ADF (ADF) and then altogether.  I downloaded the new drivers and uninstalled my current (using HP Unistaller) HP software according to the instructions on the support page.

  Now, I can not reinstall the software (the installation hangs on the verification stage) so I can't hope to upgrade the driver.

  Hi @kbsmcd,

  I can help you install the software and solve the original problem that you experienced when you try to scan from the document feeder. Complete the following steps in the order I present them in and let me know the results of your efforts:

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

  Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
  program error
  necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
  Already uninstalled and re-installed the software manufacturer labels several times. No luck.

  It seems it all started to go wrong after your update of Safari went wong:

  http://www.Apple.com/support/Safari/

  Link above is for Support of Safari.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know your Label program Vista compatibility.

  Check if your program is Vista Compatible:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  Try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Impossible to reinstall the software

  Hello everyone

  (Finally, the labels on the site appear in French, but as I see discussions in English, I guess I have to publish in English?)

  I bought my k610im four and a half years, and it worked pretty well.

  Just, one day, I forgot back to the Welcome screen, while itself has not locked by the keyboard.

  As I took my handkerchief, which selected games and hold the C button. The game I played more often has been removed.

  I talked about this in a forum, I suggested to reinstall the software with PC Companion.

  Who has deleted all the games.

  Then I got a link to download the game, but this link was not working from the PC, I would have had to refrain from using my phone a month integer.

  Later, I found games to download, in the form of jar files and install via MyPhoneExplorer.

  Well, some of these games went very well.

  But apparently one of them was exactly what he claimed to be: now, my phone got used to turn off at any time without any warning. Most of the time it stops after the video output display, so it is clear the battery does not seem to be the problem (which can happen half an hour after I fully charge the battery), but once I saw the phone turned off with black screen, just instantly in a list.

  I presume that the relocation of the PC Companion software can be a solution to this problem?

  But it doesn't seem to be willing to do. It takes a minute to prepare the PC, the other to check the phone, and then three seconds after the beginning of the update, says there is no updates to install. It is quite strange, because right after that opening PC Companion with the phone plugged in, I was proposed to update from version to R1JC002 R1CB001. The link to repair the phone was no more successful. Can I assume that an update is available for a k610 is OK for a k610im?

  I also tried Update_Service_Setup - 2.11.10.7.exe, but also, he told me that my phone was already at day and last point.

  Well, is there still something to do? This phone is most useful on that power off.

  Oh and by the way, do you know an antivirus that can analyze the jar files to install on such a phone?

  So I think that the only option to update or reinstall the phone would be that it be reviewed in a repair center. See if the repair tech can reinstall using their tools.

  Contact local support for more information on local repair centers.

  http://www.sonyericsson.com/CWS/corporate/common/contact/phonelist

• Log after you reinstall the software

  Hello

  My phone (compact Z5) restarted itself sometimes without reason.

  I decided to reinstall the software based on the information that I found in the internet.

  Everything was fine until the Google account verification.

  I have not used a single Google account on my phone, which is also last synchronized account.

  The problem is phone said: "he is not one of this account of phone users.

  Any advise on this?

  Thank you.

  To be honest I don't know, I haven't met this scenario before. I could test it, but in the end you would find the answer before that I would.

  Since you have changed the password for your Google account, I think it is very likely that your device is under the locking of 72 hours and you should be able to hopefully unlock after that that period of time. If you are not able to do so, you will need to send the appliance to one of our authorized service centers. If Yes, contact your team of Local support for more information on how to proceed.

  Be sure to keep us updated on this subject!

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

• I had bought photoshop CS5, and installed on a PC. He blew, normal a thunderstorm. Comment to reinstall the software on my new PC

  Hello

  I had bought photoshop CS5, and installed on a PC.

  He blew, normal a thunderstorm.

  Comment to reinstall the software on my new PC.

  Of course, I have the activation key,

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".