LaserJet Color MFP M175nw 100: Cannot reinstall the software to update driver (after having uninstalled by following the instructions on the support page)

Similar Questions

• HP LaserJet Color MFP M175nw 100 prints, but not scan

  This problem has just appeared out of nowhere the LaserJet printer prints (so it is connected), but when I run the HP basic digitization program, I get the error message that the scanner is not connected.  I rebooted and restarted the printer. Also, I downloaded and ran printing HP and doctor Scan. It detects the printer and the scanner as "installed", but when I ask him to communicate with the scanner, it is said that the "selected product is not conencted".  When I try printer (same ip address), it detects it and gives me the possibility of "Difficulty Printing" or "problem analysis". On the "difficulty of analysis", it says "establishing connection with Scanner", but loops back to the beginning of the process, without success.  Now, it will blow your mind, if I screen Win-8 Metro and run the HP and Capture digitization program, the scan works perfectly (Although this scan utility is more limited than the regular version of HP-Scan). So, here I am trying to solve a communication connection problem, when none really exists.  Has anyone ever seen this situation? Anyone got the answers?

  I fought this problem since I bought the color printer. I understand that the printer is discontinued. I love it, I have two, they work great, except for this problem.

  Now my conclusions and solution.

  After installing the software, it works fine. After a while it doesn't. Some software installed HP must be retired by anti-virus programs or gets too writes because he went, so that the scanner doesn't scan. I have yet to find what is happening to the scan software, but it disappears.

  My solution...  I remove all the software printer HP 100, including port data in the configuration of the printer. If you have installed several times, you will have a list of information about the printer port, remove it.

  I use their basic installation software. Usually always scan not scan. You must install it AGAIN, during the first installation. It works every time, until it disappears again.

  HP technical support has no idea on this issue. I spent more than seven hours talking to probably all the tech they have without success. Finally it me they would make me a 'deal' on a printer company.

  I would like to know if you find that zapped installs it HP. As far as I know is it disappears and the scanner no longer works.

  [email protected]

  Bob

• HP Laserjet Color mfp M175nw 100: How can I connect the router to secure network?

  How do you set the printer to connect to the network through a router password? Where would you want to enter the password?

  On page 43 of the technical reference software, it shows how to configure the wireless through the built-in Web server.

  This link also have other reference documents (manual, software reference technique, quick reference Guide and Setup Guide) that might be useful in the future.

• Print HP Laserjet Pro 100 Color MFP M175nw missing / disappeared along the axis of each page

  HP Laserjet Pro 100 Color MFP M175nw. operating on Windows 7 from my wireless laptop. Just bought this again a few days ago and every page of the printed word has about 20mm wide streak lack of feeling running down the Center. What can I do to fix this? I tried printing a page a couple of times of cleaning and the print quality too a few times Menu color grading, but that made no difference. I use a Premium quality paper for use of the laserjet printer. Could someone please let know me what I can do. Thank you in advance.

  Hi Watcher35,

  I see that the Laserjet Pro 100 ACM M175NW new is missing print in the middle of the pages, you ran cleaning and color calibration, but the issue is not resolved.

  This would be a specific example of the question: but with the 'Bb' would be completely missing?

  This HP document: solving Print quality problems can if you take some of the same steps you did already, I suggest you don't skip any step.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

  Kind regards

• TurboCAD Deluxe 15. impossible to find my new 100 HP Laserjet color MFP M175nw

  Hi, I have bought and installed my new HP Laserjet 100 color MFP M175nw but have found a problem with the printing of drawings in TurboCAD Deluxe 15.

  If I try and print a drawing to the printer icon, a warning of TurboCAD appears saying 'Please select a default printer for your system' and nothing is displayed.

  If I try to click on 'File' > 'Print' there is also nothing that passes.

  I have HPPSdr and that gives me no information. Can anyone help please since this is an important issue for me.

  Thank you very much

  Phil.

  Hi Phil,

  If you are able to print from other application programs then the question has with the autocad program. You want to call for help with this issue.

• 100 HP LaserJet color MFP M175nw

  Hi - happened to have the printer connected via ethernet to wifi; am able to print without problem; attempt to analysis of the results in the message "scanner communication cannot be established. Make sure that your product is under tension blabla. »

  Anyone have any good ideas?

  Mike

  Hi again - after using the utility and reinstall the hp software it works now. Thank you.

• HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

  HP LaserJet M2727 MFP Series PCL 6
  prints blank page before and after each document in all cases
  Does anyone else have this problem.

  It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

  See if they help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

  http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

• HP Laserjet Color MFP M175 100: Reset the web password Hp Laserjet 100 Color MFP M175nw

  Hi guys,.

  I need help, as I am not able to access my control panel of my 100 color of hp laserjet M175nw MFP printer wireless.  I recently picked up a new wireless router and unable to even log in the control panel to enter the parameters without news feed, I forgot the password I had set for the control panel during the initial installation and desperately need advice on how can I reset the password for this computer.

  Please help I have a printer which I am unable to use.

  Kind regards

  9japrinter

  Hi @9japrinter,.

  I see by your post that you need to reset the password for the printer. I can help you with this.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• 100 HP LaserJet color MFP M175nw stops responding

  I set up my printer for direct printing and printing in cloud and all was good. The printer is a little more than a month, bought new, not a refurb.

  then:

  (1) standby mode does not seem to awaken the printer when I sent something from home, so I have disabled all sleep modes.

  (2) black ink cartridge error (I wanted to give you all the details, but I'm sure that this is not an impact on the printer)

  (3) the wireless network, the printer is connected to stops working wireless and the blue light is flashing on the printer (wireless to the router is dead for all wireless devices)

  (4) at some point after all the above occurs, the printer stops responding. Nothing will be printed, I can't make a copy and all the buttons on the front panel do not respond, except for the input/output button that I need to turn it off and the fire back up and then I can printing/copying again.

  Thanks for any help, I hope that I have provided all the necessary information. It doesn't seem to be any specific length of time before the printer ends like this, but he does it for about a week and I'm just starting to write some info that I can just when and why he's doing this

  Thanks for the reply, this weekend I have reset the router, updated its firmware and set everything back to normal. All works well again.

  to answer a few questions in case anyone else gets on this post:

  (1) a PC XP and a laptop Mac 10.7 plug directly on the printer printing becomes necessary - usually used as a printer wireless for co-collegues/customers

  (2) I can't check the printer info now, but the router has an IP static 4

  (3) it is a linksys wrt54G v8

  (4) I don't remember do the update of the firmware for the printer after I had installed the unit earlier

  (5) printer is plugged directly into a wall outlet

  (6) Yes, power on the printer of recycling solves the problem temporarily. When I turn the printer back on, the printing start immediately.

  Thanks for your reply. Sorry I don't see the answer until I played with the router, but I lost the connection on my laptop via the same router so I thought that the question should be in the router. A reset is complete, update and reconfiguration has put me at how everything worked at my first installation of the printer. Thank you for your request

• HP LaserJet Pro MFP M125-M126: cannot set the default printer

  Hello

  We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,

  quick response is appreciated,

  Hi @darshan9 ,

  I see that you have problems affecting the default printer for users and you cannot print over the network.
  I'd love to help you.

  Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?

  You have administrative rights on the computer to make changes?

  What is the name and the product number of your printer? How can I find my model number or product number?

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  I suggest you to check if you have another account user or an administrative account.

  I also suggest to create a new user account and check if you are able to set the default printer.

  Create a user account. Create a user account.

  If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If there is anything else I can help you, let me know.

  Good day!
  Thank you.

• LaserJet color MFP M475dw 400: icons inside the entry door

  On the inside of the door on the right side is a "pictogram" or icon representative a procedure which I think is what for after changing toner cartridges. I don't understand what he tells me to do.

  This is what a person familiar with this "pictogram" which can describe what he tells me to do?

  Any help is greatly appreciated,

  Don

  Correct, shows where are the doors/opening, all directions.

• Cannot find the Support Page of 1301tx Pavilion G6

  I want to update the drivers of my laptop but I'm not able to find download driver page for HP Pavilion G6 1301tx. Above all, I would like to update its switchable graphics.

  Kindly help.. !!

  Thank you

  Hello

  Please use the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&product=5208101

  Kind regards.

• locking password for admin - LaserJet 100 color MFP M175nw

  Hello

  I just bought a 100 LaserJet color MFP M175nw. Went in the menu of the box tools and entered a password. The next thing that happened is that I can not connect because it says that the password is incorrect

  (Might have to do with my generated passwords and some characters is not allowed for the password (wouldn't be the first time, generally to get a new password is a matter of resetting is by mail).)

  Anyone who is willing to tell me how to reset the unit? Also where can I find the serial number of the device? What is the small sticker under the scanner glass?

  Thanks in advance!

  Best regards.

  Sjoerd

  Solved with quick intervenience of HP telephone support team. EU to hold a few buttons and reset has been done. The most difficult thing was to find the serial number of the printer, it doesn't seem to be anywhere on the device (down, front, back, inside,...) Me that I still had the box where it is "also" printed on the chance.

  I also discovered what was wrong with the password. It does not longer then 16-character password and those that I pasted my password generator/Manager is 20 characters by default. For example, when you enter it symply ignored the finals four characters.

  Phone support credits for pick up the phone fast, also thanks to the technical support.

• LaserJet 100 color MFP M175nw wifi connection problem

  A few days ago I bought the new router Cisco RV 120W and 100 HP Laserjet color MFP M175nw and

  Hi yarzig

  I understand that you are unable to configure the wireless to the printer.

  Make sure that the computer is on the right side of the network.

  Unplug the ethernet cable from the printer.

  Restore the default settings of the printer.

  Arrow to restore default settings, ok ok, right on the selection of the printer setup button, arrow right in the service menu.

  Print a configuration report to check that there are no IP address and name of your network. (SSID)

  Go to the install button (key) on the printer, arrow to the reports on the right, select config report.

  Now, connect the ethernet cable from the printer to the router.

  Wait about 1 minute and print the configuration page to get the IP address.

  If you have an IP address valid address for the printer, try and access the web server integrated.
  
  Type the IP address into the internet address bar explore.
  
  
  
  If it loads the page from the network printer then the printer is on the network.

  Now, we can configure the wireless connection.

  Click on the tab of networking, on the left, select Wireless, fill in the information. Apply the settings, once you get a response back, and then disconnect the ethernet cable from the printer.

  Should get a solid blue light on the printer.

  Now, run the Add Printer Wizard.

  If you use Windows 7, go to start, devices and printers, add printer, go through the wizard. Should find the printer and install the driver. If not, go to add printer, select local, select Create a new port, click on menu drop-down and select TCP\IP, next, type the IP address of the printer. Continue the wizard.

  Make sure the printer is online.

  Test it wireless and see if you can now print.

  If you need assistance please provide the following so I can help you
  
  better.

  What operating system do you use?
  
  Here is a document to your operating system Windows.

  Is it a laptop or desktop?

  Is the computer wireless or wired to the router?

  What configuration of network do you have? (Modem/router/2 routers/booster/airport/switch)

• LaserJet 100 color MFP M175nw: Laserjet 100 color MFP M175nw will not connect wireless - used to work properly

  OK - I'm out of here.

  I've owned a Laserjet 100 color MFP M175nw for awhile, and it worked perfectly.

  Installed the software for 2 computers at home and everything worked well.

  Last week, I changed the password to my router for the home network.

  The printer showed as "offline".  I couldn't change the status.

  After much trying I totally uninstalled the software, deleted the printers on my PC and reinstalled.

  I run the installer - tell him I want to go and so that it can detect my wireless network settings.  (I also tried the option where I have to enter the information manually). All else fails.

  Setup starts and then asks me to install the USB cable.  I do that and the installation program is going very slowly (I mean it crawls along) and wrote "Product has been detected", "Waiting for installation of the product at the end. Then I get a big red 'X' and it is said that it took too long to run and a fatal error occurrred or he tells me that it cannot find a product to install.  If I run the installer and say USB only, it works very well.  Ugh.

  When I press the button on the front panel wireless and it flashes only and that's all.

  Here's what I did - full power / turn off the PC and the router.  Updated the firmware of the printer used the new installer (all from the HP website).  Tried it on 2 different PC to ensure that it was not isolated.

  The USB cable is good because after the failure, I can print via USB (I lost a forest to print the test pages).  Same PC and OS for both when I bought the printer.

  Ironically, I spent several years in this DOCUMENT, so it's not familiar works for me, just very frustrating!

  Well, I finally had it - realized that the WIFI adapter on the PC had to have the new password entered.

  It was step 1.  Step 2 followed another post where I attached the printer directly via ethernet to the router cable, and once the IP address appears in the menu of the printer, I entered on my browser and the name of the router is entered, pw and managed to turn off the wireless printer on.  Then, by running the installer worked like a charm.  Woo-Hoo