Same router on 2 laptops different connection speed / 1's butt 48, it is vwhy 54

Similar Questions

• JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

  I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

  Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

• Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

  I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

  Hello

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  
  

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Low Internet speeds on HP Pro Book compared to my other Samsung laptop using the same router

  My brand new HP Probook s 4340 crashed after 6 months and had to be sent back to Poland to the hard drive needs to be replaced.

  Since she came back, I noticed that when I use websites with graphics (sites of airlines, in particular) the speed upload and download is VERY slow and I can hear the roar of the laptop and work hard. I now tried another laptop at home with the same router and it works very well - so it is clearly my HP laptop or maybe I've got a virus on it - not sure.

  Please could someone give me some ideas to check and try.

  It is still under warranty and I don't want to have to send it back without a laptop for 2 weeks and lost all my data once more. Thank you.

  Check the advanced settings in Google chrome. Can help reset the default browser settings.

  

• laptop to connect wirelessly with the printer new router is installed cannot be obtained

  the printer is a hp3050A J611

  Hello

  1. What operating system work?
  2. What exactly happens when you try to connect to wireless printer? You get the error message?
  3. What is the brand and model of the router?

  Try to connect the printer directly to the computer and see if that helps.

  Try adding Assistant printer on the laptop and check if the printer can be added. Consult the mentioned below to the links for the same thing.

  Install a printer

  Install a printer on a home network

  Please come back with more information so that we can help you better.

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• two computers using the same router belkin wireless gave rise to the loss or crippling a slow internet connection, why?

  Two laptops in my house share a belkin wireless router. Every 10 minutes, when the two laptops are connected to the internet, one or the other seems to push the other off the connection. Then speed either decreases or the connection is completely lost. This occurs when one of the laptops is using Skype or download, but also just when both are normally surf as well. I've never known a wireless router not being able to manage two laptops before. Any ideas, anyone please? The two laptops running Windows 7 if it helps?

  Hello

  Did you change to the computer?

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I also suggest you to see link and check.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  You experience slow performance in Internet Explorer 9

  http://support.Microsoft.com/kb/2398082

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• I want to use my network connection to neighbors through his router on my laptop

  I want to use my network connection to neighbors through his router on my laptop. He gave me the info to do it, I do not know where to enter it or where to go. HELP PLEASE!

  Hello

  What operating system do you work?

  You can refer to:

  http://Windows.Microsoft.com/en-us/Windows/view-connect-available-wireless-networks#1TC=Windows-7

• How can I connect my router to my laptop?

  Trying to get my laptop to connect to my commputer home router, but it asks for a security key? What is c?

  Hello Salsajames2002.

  It is the key to access the router wireless.  Assuming that you haven't changed, it will be probably be displayed on a sticker on the router or must be indicated in the instructions for the router. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• How to share files and printers between windows xp desktop that is connected to a wireless router with a laptop running windows 7. printer is connected to the desktop computer

  Hi all.  I normally wouldn't have a problem with that, but I must be missing something.  I want to create a home network or small business between my desktop running windows xp pro sp3 and my laptop running windows 7 Home premium.  I want to share files and printers.  My desktop with windows xp computer is connected to a wireless router.  The printer is connected to my desktop as well.  My laptop is wireless with the wireless router.  I tried everything I can think of to get these two devices to the network.  If anyone can help.  Don't forget, my printer is connected to my desktop with windows xp and is connected to my wireless router which is connected to my cable modem.  Internet works fine.  the laptop with windows 7's wireless and internet works fine.  just impossible to get the two see each other or share what anyone.  Thank you.

  With respect to the sharing of printer (s), microsoft has a utility called 'Print Migrator'

  Download & install, create copy, send a copy to the other pc to share its use.

• Computer Vista laptop cannot connect to new wireless router

  I had the laptop for about a year and a half, and he has a history of being pretty skittish about the wireless connection.  Often he simply refuses to do so.  During vacation last year, for example, the other three laptops connected family easily to wi - fi hotel, but mine has refused to.  There are a lot of other moments when the laptop could not connect, but I was able to connect to two most important places - home and work - without much trouble, and so I haven't looked too hard to solve the problems of connection up to now.

  This week, I replaced the router in my original configuration.  The old Netgear router kept giving up the connection between her and my ISP.  The new Linksys router looks rock solid in this regard.  I have a desktop running XP computer that is wired to the new router Linksys, and he sees the internet very well.  My laptop Vista unable to connect (wireless), however.  He sees the network with a lot of intensity of the signal, and it tries to connect.  I get a message saying that the connection takes longer than usual, and then another message saying 'connected.'  However, I do not have internet access, and I see other devices (just the XP desktop, really) on the network.  The Network and Sharing Center shows my laptop connected to the 'unidentified network', and then there is a red X between this network and the Internet (represented by a grey globe).  Laptop computer signals its 'access' as "local only".

  From the desktop, I can access the internet, so the router is connected to the points upstream.  From the desktop, I can also access the router configuration pages, and I see that it does not list the laptop as a dhcp client, even if the laptop thinks that it is connected.

  ipconfig on laptop computer displays a wacky IPv4 address: 169.254.2.91 and I guess that the laptop does not get an address passed to the router.  I think that there should be a 192.168. *. * address if it worked properly.

  Now, I was pretty sure my laptop's wireless adapter to work properly.  It always connects to the old router and it always connects to the work.  But to be sure and really test the new router, I went out and bought another USB adapter wireless.  When I plug it into the computer to Office XP, the Office connects to the router and can see the internet (even with the connection cable is disconnected).  So the new router and the new wireless USB adapater properly.  When I plug the USB wireless adapter into the laptop, the laptop still can't connect and still not get a good ip address assigned by the router.

  I've been at this for a few days now, and I could really use some help.  I read a few items in the Microsoft forums that was supposed to fix the problem.  One of them told me to try to start a program called DHCP in the Administrative Tools folder.  I do not have this program on my computer.  Another told me manually change my registry (ouch!) and add a new DWORD value, and set its value to 1.  I did, but it did not fix the problem.

  I would be very grateful for any help.

  Jim

  Alright.  I am home to work and back again.  I have read several posts with people reporting problems similar to mine, so I guess I'm not alone in this.  In a thread, the experts proposed to start in Mode safe mode with networking.  So I gave that a shot.  I still couldn't really connect - just this 'local only' without an assigned IP address.

  One thing I did notice, is that my laptop brand and its wireless adapter seem to get a special mention in most positions.  I have a HP Compaq Presario CQ50 Notebook PC running Vista Home Premium SP2, 32-bit version (even if the processor is 64-bit).  The wireless adapter is an Atheros AR5007.  Several other people with this card have reported problems.  Maybe it's the cause?

  I look into updating the driver for the card, even if yesterday's test with the separate USB wireless adapter showed that the problem could not just be limited to the Atheros card.  To search for a driver update, I connect my laptop to the router with an ethernet cable.  It's nice to see the web on your laptop.  No update driver does.

  For fun, I try to establish a wireless connection with the router, while the wired connection is still in place.  Looks like maybe it worked?  I say a little prayer and unplug the ethernet cable...

  It's a miracle!  I have a wireless connection to the router and beyond, to the internet.  Huzzah!

  The network has a real name, too, instead of just 'unidentified network '.  I want to change the network type from the public to the private, which I was unable to do while he was still 'unidentified '.

  Can I terminate the connection so that I can see what happens when I try to reconnect.

  Another miracle!  It connects to and still see the internet.  Callooh!  Colay!

  Next test: see what happens after a reboot... (please, please, please)...

  Ch-ching!  It works again!

  Final (?) test: reinstall the McAffee internet security suite and restart.

  And it still works.

  Here's a recap of what I found:
  1. laptop could not connect wireless router again, despite dozens of attempts in which I get every available straw
  2. laptop computer could see the internet when connected to the router
  3. laptop could connect wirelessly to the router while the wired connection is in place
  4. Once this first wireless, laptop computer was able to connect to the router even when the wired connection has been removed and the computer restarts

  I would describe my discovery above as a work-around rather than as a solution, however.  It does not always help me stay connected the next time I'm on vacation, for example.  But perhaps the information I provided can help experts to diagnose the real problem a little.

  I look forward to hear something back.

  Jim

• How do I fix my laptop to connect to my wireless router?

  How do I fix my laptop to connect to my router wirelrss?

  Hello

  Check with the router manufacturer, their online documentation and forums support (if any). Most have
  excellent tutorials online. The router must be configured before connecting to it.

  -----------------------------------------------------------------------------------------------------------------------------------

  More troubleshooting:

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.