reinstallation of Windows 7 premium edition family

Similar Questions

• Cannot load microsoft Highway 2010 on windows Vista premium edition software

  I've used Microsoft Autoroute 2007 using Windows XP on a laptop. I have a new laptop now works on Windows Vista premium and I can't load highway 2007 or the newer 2010 version. After loading the CD and trying to open the software to use when it comes up with "your registry settings for this application were not copied correctly"... etc. Despite the delete and reload the CD, it won't work.

  Any ideas please?

  Thanks for your help. I went on the other forum as you suggested and crept upward by temporarily disabling the User Account Control (UAC)

  Thanks for your help

• Reinstallation of Windows XP Home Edition (new hard drive) does not start properly, please help

  I have a HP Pavilion zd7000 that bad on the hard drive. I bought another and used the reinstallation disc to reinstall Windows Home Edition.  Everything seemed to go well, but it starts now to a HP Invent logo black screen that says press F10 to go together to the top and F12 at startup of Lan.  Then, a second black screen appears that says press F1 to resume or F10 Setup.  I press F1 and Windows loads very well.  What can I do to have Windows load immediately without going through this?  Any help will be greatly appreciated!  Thank you much in advance!

  EverWin... IT WORKED! I can't THANK YOU enough!  I've been to every site I could find... begging someone to help me.  Audit throughout the day (for a week) to see if someone had answered... tried everything!  I'm so happy (and tired) I could just cry.  I can't believe that you took the time to help me... I appreciate it very much!

  God bless you!

• Windows 7 Premium Upgrade FAMILY PACK will allow a custom installation for VISTA in which you get a 'clean install', while losing all windows & other files?

  Windows 7 Home Premium FAMILY PACK upgrade?

  Yes - start Windows and start the upgrade of Windows, and you provide the option.

• my cable internet connection is only 10Mbps and won't go to 100 Mbps windows Vista premium edition

  My inter connection wire line or hard earth runs only at 10 Mbit/s and should be 100 Mbit/s running vista Home premium and and using realtek rtl8168C (P) / 8111C (P) FAMILY GIGABIT ETHERNET NIC (NDIS 6.0).  How can I solve this problem.

  Hello

  I'm not aware of any Internet service provider that offers a 100 Mbps connection.

  The speed of the Internet connection is not a function of your material, but by the contract you have with the provider.

• the net wifi works enthernet no work for windows Vista premium edition

  I had the laptop model hp g60-243 cl

  p/n nb264ua #ABA

  enthernet no work

  NET works without work

  I'm looling for loading for reader software

  everyone knows it please hepl me

  Thank you

  try to use the 32-bit driver for windows 7

  Alternatively you can downlode a net application named DRIVER PACK SOLUTION 12.3

  Good luck

  < < <-INCLUDING 4GET to CLICK the STAR of KUDO ON THE SIDE of RIGHT TO SAY Thank YOU IF I HELPED YOU.
  I AM NOT AN EMPLOYEE OF HP, SO YOUR ANSWERS ME GIVES THE INSPIRATION TO CONTINUE IN THE FORM...

• I can't restart after repair reinstallation of Windows XP Home Edition SP3 Pro, or configuration.

  My demension 8200 Dell, Windows XP Pro SP 3, was causing me problems, mainly because of my incorrect tweeking.

  I ran my XP Pro CD, in = repair reinstall mode who downloaded for 1 1/2 hours, then asked I enter the menu Setup F2 or F12 Boot device.

  I did the two F12 & F2, and all the content in the F12 is a menu choice, which, once I chose individually, finished with a redo 'Strike F1 to retry. F12 for Setup. ».

  In F2, all content are enabled, but I wonder primary drive 0 hard

  (The F1 help) model WDC WD2000JB-car

  Automatic Type player

  200 GB capacity

  Hard drive primary drive 1

  (f1 help) Model Maxtor 6LO40L2

  Automatic Type player

  Capacity 40027 MB

  Secondary drive 0 CD-Rom drive

  (F1 help) Model 50 X CDROM ATAPI

  Automatic disc type

  Capacity d/a (in blue)

  Secondary drive 1 CD-ROM drive

  (F1 help) Model Asus DRW 22B3S

  Automatic disc type

  Capacity NA (in blue)

  As it is now, when I turn on my PC I get continueois restart, as says if I choose F1 nothing changes, choosing same F12 with the CD of XP Pro in the drive, or not.

  Any advice or help would be greatly appreciated.

  Most Dell products come with a restore partition, you should be able to access from F11, but if you have formatted the entire hard drive this partition will be gone.

  http://en.community.Dell.com/support-forums/default.aspx

  Above is the site for support of Dell systems.

  My Dell came with a cd OEM to reinstall xp pro, I think that you can not install a cd someone else on a Dell computer, but you may need to contact the manufacturer to find out for sure.

• I use windows Vista premium edition and can't get the table to storyboard / timeline screen appears

  I try inserting the narration in my movie maker project, please notify. the timeline or storyboard screens do not appear.

  Hello

  I suggest you to see the links and check.

  Work with projects in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-projects-in-Windows-Movie-Maker

  Getting started with Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

  Publish a movie in Windows Movie Maker http://windows.microsoft.com/en-us/windows-vista/Publish-a-movie-in-Windows-Movie-Maker

• Windows Vista premium edition starts only with the safe mode or safe mode with network.

  There was a low voltage or surge protector and the computer came out. System Restore does not work.

  Hi ValrieSingh

   

  1. have you tried to start in normal mode after the issuance of the power?

  2. what happens if you start in normal mode?
  3. do you get errors in normal mode?

   

  You can check results when you activate the mode low resolution. It starts Windows using your current video driver, frequency settings low resolution and refresh. You can use this mode to reset your display settings.

  See also the links below for help on the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  I hope this helps.

• Reinstallation of Windows 7 Ultimate edition, suddenly product key not valid?

  After 5 years of use, I started having trouble with my system. Microsoft Office gave errors and Windows 7 has been hard too long to start upward or too long to close. I decided to do a new reinstall of Windows 7 Ultimate. I bought the version I have in my University just now and everything was going well on the first re-setup, until I tried to install Microsoft Office only to watch him hang at start installation for far too long. After trying to solve the problems, I thought it would be better update of Windows 7 in total, well, Windows Update installation suspended installation and start-up. So I figured a reboot would help and unfortunately the o/s started showing the same symptoms he had before as I wiped the drive clean. I erased the disc again and tried a new installation, but this time all of a sudden, my product key was invalid. Again, it is a purchase copy, should I call Microsoft?

  As a reminder, I have no o/s on the system other than the installation just run by the disc, now it is stuck on the main screen product because he accepts it.

  You should be able to install without a key and start the 30-day grace period.

  This would then allow to enter the key after installation. However if that dialogue initial report, the key is invalid what you type does them not. At this point, there is no that verify that the key is correctly encrypted is the right key for the version of Windows that you are installing, it does not check with Microsoft for the key abused later, may not have a network connection.

  Make sure that the characters are correct

  B C D F G H J K M P Q R T V W X Y 2 3 4 6 7 8 9

  Some ambiguous characters do not serve but B and 8 can be confused because of the size and the tail of the Q is so small it looks like O which is not actually used

• s5510f HP Pavilion Slimline running MS Windows 7 Premium Edition, graphics card options?

  Before I disassemble my pc, I am able to add a new graphics card with HDMI output? I would use my plasma HD tv as a monitor with my wireless keyboard and wireless mouse. There is no keyboards made for my model of 'smart tv', and tab through the menu alphabet with an arrow on the remote TV is very annoying. Thank you, BAK333

  BAK333, welcome to the forum.

  While the Slimline models are not intended to be upgraded, it can be done. Here's a great thread by Erico that should help you:

  http://h30434.www3.HP.com/T5/desktop-hardware/can-I-upgrade-the-Pavilion-slimline-180-Watt-PSU-to-a-300-Watt/m-p/67620/highlight/true#M6343

  The reason why this thread is relevant is that most likely, you will need to upgrade the PSU also.  Most of the cards that are capable of providing the type of tasks you want to do will require a card with more power that the existing PSU can run correctly.

  If your problem is solved, please click "accept as a Solution.

• How can I get my computer to invite after plugging my digital camera. I am using windows Vista premium edition

  Medium

  Let's try it this way.

  While in the Panel at the top right corner should be a search box.

  In the search box, type 'Auto Play' and then the options presented with that you should include "Changing the default setting for media and devices"

• No audio device installed windows Vista premium edition

  NO No SOUND - device install

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• windows Vista HP laserjet IIIp premium edition error printing

  I have a HP laserjet IIIP printer and use windows Vista premium edition.  I used to be able to print fine, then one day could not.  I can print a test page for the printer, but I get an "error" in the Print Manager on the docs, I try to print from the PC.  I tried to restart, unplug, check for bad drivers, checked all cables, etc.  Any ideas?

  Hello

  Please uninstall the printer driver from the Device Manager and the Add/Remove programs. After this try to install it again.

  http://support.Microsoft.com/kb/283658

  LaserJet IIIP drivers are available through Windows Update.  Go to start, devices and printers, adding a printer, select the appropriate port, and then click Windows Update.  After a few minutes, the list will repopulate, then select HP (Hewlett-Packard not) and select the appropriate driver.  Note that you need a suitable driver for your cable USB / parallel.

  Let me know if the above information is useful

• The system hangs after upgrade Windows XP to Windows Vista premium,

  I upgraded my windows xp to windows Vista premium edition and it freezes all the time now, want to release until I press the off button and it shuts off and turns back on.

  Hello

  1. the manufacturer of your computer had vista drivers available for you to download and install on your computer to model?

  2 - is your computer meet the minimum requirements of vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements