The system hangs after upgrade Windows XP to Windows Vista premium,

Similar Questions

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to open the system maintenance Troubleshooter in windows vista

  How to open the system maintenance Troubleshooter in windows vista?

  Hello

  Please be informed that Troubleshooting maintenance system was introduced from Windows 7.

  However, you can run the fixit mentioned below for Vista.

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  You can take a look at solving the problems of system maintenance in windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  For more information, please visit the links below.

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  Optimize Windows Vista for better performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Warning of Chkdsk.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• Where are the "System Restore" files in Windows Vista Home Premium

  Where are the "System Restore" files in Windows Vista Home Premium.

  I would like to simplify the installation process.

  Is there a program in Windows Vista Home Premium which can create an image disk for future use.

  Is there a good disk image program/software?

  Can I record a restore point on an external drive? That is, only the last 5 days of "restore points" are available in the system restore.

  Hi SoundHealth,

  Follow the steps in the article.

  Restore your computer from a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Back up your programs, files and system settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  No, you can't save a restore point on an external drive.

• Get rid of the error flash ocx with Windows Vista Premium

  How can I get rid of a "Flash ocx" error on my system? I run Windows Vista premium.

  THX,

  Joel

  Hello

  
  Where do you find that flash ocx error?
   
  Method 1 : uninstall and reinstall the Flash Player and check if the problem occurs.
  http://kb2.Adobe.com/CPS/141/tn_14157.html
  
  Method 2 : run the clean boot and see if the problem still occurs.
  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Hope that helps.

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista SP2 enterprise. Updates to Windows from 11 August caused the system hang after starting.

  Œuvres of mouse pointer, but the catch systems when I click on any element of the bar of tasks or office. OK works in safe mode. System Restore to a date before the updates does not help. I've eliminated all unnecessary programs in menu start, including NVIDIA drivers, but the problem persists.  Any suggestions?  Thank you!

  Hi Mathew and Imran;

  Thank you.  After several reboots, add and remove services, I believe a solution to the problem.   It seems that McAfee Total Protection disliked among updates August 11... or the update did not like 'total Protection '.

  After much frustration, I removed any trace of McAfee, first using windows uninstaller, then running the downloaded program to uninstall McAfee. I then installed Microsoft Security Essentials and downloaded and re-installed McAfee Site Advisor.

  I don't think I have the same level of protection as I had before, but the system is faster and I think that I have an adequate level of security.  I'll leave it as it is for now.

  I don't want this post as a blow against McAfee, they are an industry leader in computer security and 'Total Protection' provided exactly that.  We have a second PC in our House... material of identical office however, but under Vista Home Premium, whereas this one is running Vista Business.  Home Premium system runs 'Total Protection' and has not experienced the same problem, as the system of the company.  What's up mind dat?  It runs more slowly, probably because of McAfee files analysis procedures.

  If Security Essentials works well in the coming months on this system, I can install it on the other system, as well as on my laptop.  In more than 10 years (from Windows 98 to Vista), we always used McAfee products and have NEVER had a viral infection.  Is it because of MCafee or our own due diligence?  Assume that this is not serious.

  Thanks again for your help.  You got me on the right track!  Best regards... TeeDubTW

• Restore the system (win7) after upgrade to Windows 10

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  Posted by niikos
  

  Hello, I would like to restore my system using the restoration of images on my hard drive. I did this several times worked great before. Now, I've updated to 10 and when I try toF8 when the system starts nothing happens. What can I do to restore the system to its default settings?
  I have a R700-1cz. Thnks for your time.

  There is no solution?

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• The system hangs after the installation of KB82286198 & KB980408

  system crashes after windows starts after windows update downloaded Security Update kb82286198 02/08/2010. problem solved after that I go into safe mode and uninstall the update even and reset manual download options. Same thing happened in April after Windows update kb980408.

  Hello
  
  Please cross check, the number of update must be Ko 2286198.
  
  This update will protect your system from a remote attacker unauthenticated to compromise your system and take control.
  
  For more information visit http://support.microsoft.com/kb/2286198
   
  You can try to download the update from the link below and install it clean in boot mode.
  
  http://www.Microsoft.com/downloads/en/results.aspx?pocId=&freetext=2286198&displaylang=en (select the update based on the operating system installed on your computer.)
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite M60-162: the system hangs after connection of SD card

  I at all, I have a problem when I insert an SD card in my toshiba, the system freezes. I try to install the drivers downloaded from the Toshiba site but the problem remains. The operating system is windows xp pro sp2.

  Any ideas?

  Hello

  What SD card did you use? Maybe the laptop doesn't support the format of SD card? Check the manual for the supported cards.
  Also, check the Device Manager. Check if the SD card controller is installed correctly. What you can do is to also update the SD card driver.

• programs do not appear in the start menu after upgrading windows 7

  Please, I beg you! I need help.  I got Vista with this PC from nine a year ago but recently installed upgrading Windows 7.  My programs or files do not appear, and there is a file with something like Windows.old and when I opened it presents the information I had before, but how do I transfer to see what I did to Start Up.  Also, it does not show programs like Word, powerpoint, Excel, etc.

  Window update has nothing to do with the upgrade of Windows. Posting here instead of assistance: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  But I can tell you that you will need to reinstall all third-party software because you did a 'custom (Advanced) upgrade' to Win7 (vs an upgrade in Place). Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the system restore, I get "windows vista product key you typed is invalid for activation.

  I had to do a system restore a few weeks, now I start and get the message "the windows vista product key you typed is invalid for activation" but he worked for 4 years. now HP tells me I pay $ 130 move to 7 since vista is old.

  Hello, Phindude13,

  ) Click the Start button

  (2) type: slui.exe 3 and press the Enter key

  (3) enter the product key from the sticker on your computer

  4) click on the next button.

  (5) you will be asked if want to enable, click ok

  (6) it will attempt to activate over the Internet and will return an error of invalid key (it of ok, go to step 7)

  7) click the Start button

  (8) type: slui.exe 4 and press the Enter key

  (9) select your location from the menu drop-down and click on the next button

  (10) the next screen provides the number to call to activate by phone

  NOTE: when you call this number, you will first hear an automatic voice who will try to activate Vista for you. If the automated voice gives you an option to speak to a representative of Activation Live, select this option. If this is not the case, do not enter all the numbers. This should force the voice automated transfer you to a Live Activation Rep. trying to activate through the automated voice will not work, in your case, your Activation will be successful only through the Live Activation Rep.

  Once completed, you may need to restart twice.