Reinstalled lion - invalid activation code

Similar Questions

• Why do I get: "invalid activation code?" with CS6 on a MacBook Pro?

  Help, please!

  I tried to install CS6 on a new MacBook Pro (I have a valid license, which can be found on my account of the adobe.com site).  I get a message of activation code not valid no matter what I try.  Here's what I've done so far which did not work:

  1. uninstalled and reinstalled the software

  2 disabled CS6 on an old laptop running the software

  3 tried installation in trial mode and then tried to activate (as well as a right with a code installation)

  4. establish a new user and I tried to install under the new user

  5. basically, I tried what I saw as a possible solution when reading the forums on this topic

  6 serial number entered has been checked and re-checked several times - it is my account of the adobe.com site

  7A a chat session back a little with a representative of adobe, but that case has been closed without solving the problem and I can not reopen - and I can't enter "chat."

  I talked to the following forum documents when you try the above: "invalid serial number error" and "error:"serial number is not valid for this product "|" Creative Suite. »

  I'm currently under OS El Capitan or 10.11.2 on a MacBook Pro (15-inch, mid 2015, retina).  Date and time are correct.  English has been used systematically.

  I said HELP already?

  John Merci for your help and suggestions!

  After trying your suggestions without success, I was able to do a chat session with Adobe today.  I figured out that I had 2 accounts Adobe with 2 email addresses.  The serial number that I used was for CS3 (I upgraded to CS6 in CS3).  When I finally came on the second adobe account, I discovered the CS6 serial number and installation ended safely.

  What a headache!  I think I have to tattoo the serial numbers on my forehead :)

  Karen

• Invalid activation code

  I bought a sony vaio with windows 7 Edition sr590 Home premium on Jan 2010. I just pre-installed my laptop and windows activated with the key at the bottom of my laptop. The display shows that my activation code is invalid. How can I upgrade windows 7 rc to rtm? Please help me.

  Thank you. You don't have to download anything because you already had windows 7 Home Premium. When you buy a new computer, the operating system is already installed and activated with the product key on the bottom of the computer. You didn't have to download the RC. You must remove it. There is more no product key for this.

  I hope that it has not deleted Home Premium already installed.

  Your computer is already in use then your brother gave you.

  If you remove Home Premium, you have no other choice than buying a full retail version of windows 7. No other choice. Ron

• Windows 7 all of a sudden, I have an invalid activation code

  Hello

  I have Windows 7 Home Premium, and now he asks me an activation key which, up to now (for the past 12 months), had been very well. Now when I turn on the computer it says that I have a valid version of Windows. I type in the key provided with the software (in the CD box) as provided by the store, and I get the message:
  "The product key you entered cannot be used to activate Windows on this computer".
  Now, I get a message saying that Microsoft Security Essentials will be disabled within 14 days. I also tried the activation of the phone that also does not work.
  In addition, I ran the windows application to validate and get "update installation failed. Information about the error 0 x 80070643
  I tried to update windows but get failures with the same error code as above.
  I ran the scan of Microsoft and AVG scanner and come clean. I uninstalled AVG before you repeat all the steps above. No difference.
  Clearly, this is a Windows error - please can anyone provide me with the correct software or the activation code as soon as POSSIBLE.
  Best regards, James

  I thought that you changed the product key, and I wanted to check.

  of your report:
  License status: Notification

  Reason for the notification: 0xC004F009 (grace period expired).
  
  
  You must activate by phone and speak to a representative of activation.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your question clearly to the support person.

  Alternatively, you can try here:

  https://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• Windows 7 Ultimate all of a sudden, I have an invalid activation code

  I ran the diagnostic tool and copied.

  It's here.

  I guess it's due to lack of Microsofts/problem.  If not, why so many people would suddenly have questions?

  Thanks for any help.

  Brian

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - MF46F - YDV82-VFYRF
  Windows product key hash: 5iVyECRiOeHbve0XiMeqDTCYmes =
  Windows product ID: 00426-068-0701616-86926
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010100.0.0.001
  ID: {2B38075E-6FD7-4D4B-AA69-B761D59A150A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {2B38075E-6FD7-4D4B-AA69-B761D59A150A}1.9.0027.06.1.7600.2.00010100.0.0.001x 64*-*-*-*-VFYRF00426-068-0701616-869265S-1-5-21-2081521441-1014716805-3857944521VMware, Inc.. Platform VMware virtual Phoenix Technologies LTD6.0020110602000000.000000 + 000 9BB83607018400EE 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00172-068-070161-00-1033-7600.0000-2892012
  Installation ID: 008504980373937446392910331725115402859492540171545912
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: VFYRF
  License status: Notification
  Reason for the notification: 0xC004F009 (grace period expired).
  Remaining Windows rearm count: 3
  Trust time: 15/10/2012 11:35:38

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAEAAQABAAAAAgABAAEAnJ9YdKQRDFzmt2IF/BTnIWOpXa2LUnRG

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL 440BX
  SRAT VMWARE MEMPLUG
  WÆT VMWARE VMW WÆT
  HPET HPET VMW VMWARE
  START PTLTD $SBFTBL$
  MCFG PTLTD $PCITBL$

  simply you have been scammed. EBay is full of bogus sellers. You have purchased a counterfeit windows which is not for resale MSDN keys.

  additional information:

  To see how these counterfeits are more, see:

  http://www.YouTube.com/watch?v=hzqNNiOM0cs

  You can buy a legitimate windows from a legitimate retailer.

• I bought windows 7 Home premium and had to reinstall it and it says that my activation code is invalid.

  «"" "Invalid activation code?»»"»

  I bought windows 7 Edition home premium and had to reinstall it and he says it is my activation code is valid Please help I need it for school and fear that I messed up my computer. I have school starting soon Please help!

  I don't see any problem in the report.

  What is the EXACT error you get when you try to activate?

  You may simply need to activate by phone...

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Reinstalled Vista, Activation Code invalid

  Windows Vista was behaving erratically.  So, I reinstalled from my Vista CD.  But, Windows informed me that I entered the activation code was incorrect.  I have access to my original CD of Vista purchase invoice from 2012.  Microsoft would accept my receipt and provide me with a new activation key?

  Windows Vista was behaving erratically.  So, I reinstalled from my Vista CD.  But, Windows informed me that I entered the activation code was incorrect.  I have access to my original CD of Vista purchase invoice from 2012.  Microsoft would accept my receipt and provide me with a new activation key?

  Hello

  You will need to discuss with Microsoft.

  Make a phone activation and brace yourself for a real person to help you.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• After a defective boot drive had to be replaced on my XP PRO, he asked me to activity and my active code will not work. indicates an invalid sound. I just replaced the hard drive

  I just had to REPLACE a HARD DISK broke ON MY WINDOWS XP PRO AND WHEN I REINSTALLED operating SYS ASKED FOR the activation CODE, THEN SAYS MY CODE WAS INVALID AND WONT turn ON. ANITA PHONE TALKED TO A COMPUTER AND NO HELP. I HAVE THE SAME PC. JUST REPLACED HARD DRIVE.  IN ANY CASE TO ACTIVATE. I BOUGHT THIS NUMBER OUT OF MICROSOFT FOR 145.  LARRY BLAKE

  Hi beenabean,

  Refer to the article below and try the mentioned step, check to see if it helps.

  You receive an error message after you enter the product key when you try to install Windows XP

  http://support.Microsoft.com/kb/310637

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer

  http://support.Microsoft.com/kb/312295

  How to find a phone number for a Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929

• PC HP ENVY 700 series: 8.1 Windows reinstall required activation code

  How can I get an activation code for a reinstallation of windows 8.1?

  Fullon1100, welcome to the forum.

  Product key (activation code) to win 8.1 is embedded in the BIOS.  Therefore, you can use only the system recovery software to reinstall Win 8.1.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I had to reinstall Windows XP on my computer and I can not validate my windows activation code.

  I had to reinstall Windows XP on my computer and I can not validate my windows activation code

  original title: activation code

  The computer came with windows pre-installed, and I use the restore disc accompanying Blair Technology Group, LLC. I bought both systems and I've been using just one of the restore disks which I had used on the other system a couple of times. I'll start again and use the disk I have not opened yet on this other system. The message I get, it is that when I run windows update may not check the authinticity and told me that I could have a pirated copy of windows.

• I reinstalled XP Professional on the disc that came with the laptop. It is said that the activation code is incorrect.

  I inherited my mums old laptop. There were problems with it starting, so I reinstalled XP Professional on the disc that came with the laptop. He said that the activation code is incorrect. I ran the Microsoft Genuine Advantage Diagnostic Tool and ripped the report below. It seems that the activation code I have is correct, so can not understand why it won't work!

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - T6DFB - Y934T-YD4YT
  The Windows Product Key hash: 3g4CZGFEDgbKmn/oB4pa2FZsssU =
  Windows product ID: 55274-OEM-2211906-00102
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {AC5C185A-C24F-485D-981C-80689A11613E} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution status: not activated

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC5C185A-C24F-485D-981C-80689A11613E}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-YD4YT55274-OEM-2211906-001022S-1-5-21-1343024091-602162358-682003330DIXONSXP,DIXONSXPAmerican Megatrends Inc.. 080012 20051128000000.000000 + 000Dell, Dell Computer, Dell, Dell system system system891C39E70184C06C08090409GMT Standard Time(GMT+00:00)03109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  BIOS marker string: Group 1 B 430 stores: Dixons | 1AE0C:Elitegroup Computer Systems Co., Ltd.
  Marker of OEMBIOS string. DAT: Dell, Dell Computer, Dell, Dell system system system

  Activation 2.0 data OEM-->
  N/A

  Help, please!

  Your relocation was made of a set of recovery discs Dell - which uses a key to Dell and cannot be enabled on any other brand.

  It's a Dixons computer odf, then I suspec that the COA sticker on the case is for XP Home edition, while the installation is Pro.

  You need to return to this system to its licensed version of Windows by using the recovery media for that PC - or a good disc XP Home OEM System Builder.

• Reinstalled Vista. The windows is genuine, but I don't have the activation code. What should I do?

  I bought the laptop in 2006. The windows is genuine, but I don't have the activation code. What should I do? I installed vista and because I had no code after about 4 weeks it will stop. I'm up, but its prompting me to activate again. Help, please! This has been a good laptop and will continue to be if I can get help with activation.

  Original title: old Dell laptop broke down.

  Hello

  You can contact Dell and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a small fee.

  If this method has not been destroyed by the last re - install, and if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  With a Dell, you press F8 at startup and follow the instructions

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=266618

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• Windows does not accept my activation code after you have reinstalled

  I had to reinstall windows vista home premium w/sp1 and it tells me that my activation code is already used... This one is the one I eliminated, how do I change my new installation?

  You simply need to use telephone activation.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• I need to reinstall a clean vista 32-bit, but after you have entered the activation code I get the error from a previous version of windows

  Because the two system restore points are corrupt, I need to reinstall vista, but I get an error message using the previous operating system after I entered the activation code, is there a work around? (lost in moving to the new apt disk backup)

  Hello

  you sitting not what type of disc you are using

  you start from the DVD drive to do a clean install

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this too

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  and here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

• Windows 7 - lost the activation code, but already reinstalled windows 7 completely.

  So I recently bought my old Cousins computer game. He decided to do a reinstall of windows 7 Ultimate for me if I could install programs I wanted to, but he had lost the cd shirt (who had the top activation code) in the process.
  I already tried many key finder programs but the code it gives me does not work and I will not buy another key for windows 7.

  I already tried to contact a Microsoft support person, but he refused to help me at all when I said that the PC I built piece by piece and not purchased as an all in one. Well he did specifically mention that was the reasson why he could not help me but I know that is what I know, family members and friends who helped with similer questions before.

  All computer parts were purchased for reputable sorces, and none of the programs on the pc were pirated in form in any way.

  I have access to the box of windows 7 ultimate is checked as well as the barcode of disk on it.

  Please help me!

  Anyone in these forums has the power to give you a new key or unlock any key.

  In fact, Microsoft NEVER release a key.

  Your only options are:

  (1) IF you have the proof of purchase (in the case of an OEM System Integrator, it is especially the COA sticker) then the phone activation center and explain the situation.

  (2) purchasing a new Windows license