Invalid activation code
I bought a sony vaio with windows 7 Edition sr590 Home premium on Jan 2010. I just pre-installed my laptop and windows activated with the key at the bottom of my laptop. The display shows that my activation code is invalid. How can I upgrade windows 7 rc to rtm? Please help me.
Thank you. You don't have to download anything because you already had windows 7 Home Premium. When you buy a new computer, the operating system is already installed and activated with the product key on the bottom of the computer. You didn't have to download the RC. You must remove it. There is more no product key for this.
I hope that it has not deleted Home Premium already installed.
Your computer is already in use then your brother gave you.
If you remove Home Premium, you have no other choice than buying a full retail version of windows 7. No other choice. Ron
Tags: Windows
Similar Questions
-
Why do I get: "invalid activation code?" with CS6 on a MacBook Pro?
Help, please!
I tried to install CS6 on a new MacBook Pro (I have a valid license, which can be found on my account of the adobe.com site). I get a message of activation code not valid no matter what I try. Here's what I've done so far which did not work:
1. uninstalled and reinstalled the software
2 disabled CS6 on an old laptop running the software
3 tried installation in trial mode and then tried to activate (as well as a right with a code installation)
4. establish a new user and I tried to install under the new user
5. basically, I tried what I saw as a possible solution when reading the forums on this topic
6 serial number entered has been checked and re-checked several times - it is my account of the adobe.com site
7A a chat session back a little with a representative of adobe, but that case has been closed without solving the problem and I can not reopen - and I can't enter "chat."
I talked to the following forum documents when you try the above: "invalid serial number error" and "error:"serial number is not valid for this product "|" Creative Suite. »
I'm currently under OS El Capitan or 10.11.2 on a MacBook Pro (15-inch, mid 2015, retina). Date and time are correct. English has been used systematically.
I said HELP already?
John Merci for your help and suggestions!
After trying your suggestions without success, I was able to do a chat session with Adobe today. I figured out that I had 2 accounts Adobe with 2 email addresses. The serial number that I used was for CS3 (I upgraded to CS6 in CS3). When I finally came on the second adobe account, I discovered the CS6 serial number and installation ended safely.
What a headache! I think I have to tattoo the serial numbers on my forehead :)
Karen
-
Windows 7 all of a sudden, I have an invalid activation code
Hello
I have Windows 7 Home Premium, and now he asks me an activation key which, up to now (for the past 12 months), had been very well. Now when I turn on the computer it says that I have a valid version of Windows. I type in the key provided with the software (in the CD box) as provided by the store, and I get the message:"The product key you entered cannot be used to activate Windows on this computer".Now, I get a message saying that Microsoft Security Essentials will be disabled within 14 days. I also tried the activation of the phone that also does not work.In addition, I ran the windows application to validate and get "update installation failed. Information about the error 0 x 80070643I tried to update windows but get failures with the same error code as above.I ran the scan of Microsoft and AVG scanner and come clean. I uninstalled AVG before you repeat all the steps above. No difference.Clearly, this is a Windows error - please can anyone provide me with the correct software or the activation code as soon as POSSIBLE.Best regards, JamesI thought that you changed the product key, and I wanted to check.
of your report:License status: NotificationReason for the notification: 0xC004F009 (grace period expired).
You must activate by phone and speak to a representative of activation.How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) explain your question clearly to the support person.
Alternatively, you can try here:
https://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
-
Windows 7 Ultimate all of a sudden, I have an invalid activation code
I ran the diagnostic tool and copied.
It's here.
I guess it's due to lack of Microsofts/problem. If not, why so many people would suddenly have questions?
Thanks for any help.
Brian
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - MF46F - YDV82-VFYRF
Windows product key hash: 5iVyECRiOeHbve0XiMeqDTCYmes =
Windows product ID: 00426-068-0701616-86926
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {2B38075E-6FD7-4D4B-AA69-B761D59A150A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{2B38075E-6FD7-4D4B-AA69-B761D59A150A} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 64 *-*-*-*-VFYRF 00426-068-0701616-86926 5 S-1-5-21-2081521441-1014716805-3857944521 VMware, Inc.. Platform VMware virtual Phoenix Technologies LTD 6.00 20110602000000.000000 + 0009BB83607018400EE 0409 0409 Eastern Standard Time(GMT-05:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-068-070161-00-1033-7600.0000-2892012
Installation ID: 008504980373937446392910331725115402859492540171545912
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: VFYRF
License status: Notification
Reason for the notification: 0xC004F009 (grace period expired).
Remaining Windows rearm count: 3
Trust time: 15/10/2012 11:35:38Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: MAAAAAEAAgABAAEAAQABAAAAAgABAAEAnJ9YdKQRDFzmt2IF/BTnIWOpXa2LUnRGActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL 440BX
SRAT VMWARE MEMPLUG
WÆT VMWARE VMW WÆT
HPET HPET VMW VMWARE
START PTLTD $SBFTBL$
MCFG PTLTD $PCITBL$simply you have been scammed. EBay is full of bogus sellers. You have purchased a counterfeit windows which is not for resale MSDN keys.
additional information:To see how these counterfeits are more, see:
http://www.YouTube.com/watch?v=hzqNNiOM0cs
You can buy a legitimate windows from a legitimate retailer.
-
Reinstalled lion - invalid activation code
I reinstalled lion and used the migration assistant to copy everything on and now it says my serial code is not valid. I don't have the serial code more am I out of luck?
I still have my time machine backups when subsequently worked.
I don't have the serial code more am I out of luck?
Yes, you may. If it does not appear on your Adobe account, or you wrote it / she saved somewhere, that's all. Adobe does not know what you don't know. All Adobe applications must be installed correctly and cannot be restored from some odd backup or migration assistants.
Mylenium
-
«"" "Invalid activation code?»»"»
I bought windows 7 Edition home premium and had to reinstall it and he says it is my activation code is valid Please help I need it for school and fear that I messed up my computer. I have school starting soon Please help!I don't see any problem in the report.
What is the EXACT error you get when you try to activate?
You may simply need to activate by phone...
activation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
-
I just had to REPLACE a HARD DISK broke ON MY WINDOWS XP PRO AND WHEN I REINSTALLED operating SYS ASKED FOR the activation CODE, THEN SAYS MY CODE WAS INVALID AND WONT turn ON. ANITA PHONE TALKED TO A COMPUTER AND NO HELP. I HAVE THE SAME PC. JUST REPLACED HARD DRIVE. IN ANY CASE TO ACTIVATE. I BOUGHT THIS NUMBER OUT OF MICROSOFT FOR 145. LARRY BLAKE
Hi beenabean,
Refer to the article below and try the mentioned step, check to see if it helps.
You receive an error message after you enter the product key when you try to install Windows XP
http://support.Microsoft.com/kb/310637
You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer
http://support.Microsoft.com/kb/312295
How to find a phone number for a Microsoft Product Activation Center
-
Trying to activate my new Adobe CS6 software and he said that the activation code is invalid?
Make sure you use the correct number, find the serial number of your product Adobe quickly and make sure the installation file and serial number match, error: "serial number is not valid for this product". Adobe Creative Suite
-
Reinstalled Vista, Activation Code invalid
Windows Vista was behaving erratically. So, I reinstalled from my Vista CD. But, Windows informed me that I entered the activation code was incorrect. I have access to my original CD of Vista purchase invoice from 2012. Microsoft would accept my receipt and provide me with a new activation key?
Windows Vista was behaving erratically. So, I reinstalled from my Vista CD. But, Windows informed me that I entered the activation code was incorrect. I have access to my original CD of Vista purchase invoice from 2012. Microsoft would accept my receipt and provide me with a new activation key?
Hello
You will need to discuss with Microsoft.
Make a phone activation and brace yourself for a real person to help you.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Hello
My LR5.7 on Windows 7 crashed. I tried many things and has to download a new version (5.7.1). It doesn't recognize my activation code. Tried every code I got from LR1. What should do?
Dany
A possible cause is that you have downloaded the creative Cloud of Lightroom version, which does not accept your serial numbers; Instead, you must download the stand-alone version (which does not accept the serial numbers) of updates
-
activation code/product key
Toshiba has replaced my hard drive under warranty, and now my activation code/product key is "invalid" Toshiba said to contact Microsoft - Microsoft said to contact Toshiba. I don't think I should pay something for this problem. All I want is basic programs is the computer when I bought and lost because of a defective hard drive. It came with Windows vista Home premium. Any suggestions? The FRY was no help either.
Try this and wait for a real person:
http://www.Microsoft.com/Windows/Windows-Vista/quick-start/activation-FAQ.aspx
Quick start: Activation FAQ
1. click on start and in the search for box type: slui.exe 4
2. press enter on your keyboard
3. Select your country.
4. take the phone activation option and brace yourself for a real person.
If verrouille locked with the exception of 3 choices, use the option of reduced functionality into Windows to make Activation above.
See you soon.
Mick Murphy - Microsoft partner
-
Legitimate access to invalid error code.
I got my computer brother when he passed awaybut couldn't understand the password, so I reinstalled a copy of Windows Home Vista I got with another computer that I bought a year or two ago. I get a message that my activation code is invalid, but it was a legitimate purchase. What I am doing wrong?
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxJ W Stuart: http://www.pagestart.com
-
Activation code not valid after installing CS4 on new Mac
When my (old) CS4 Master Collection installed, the activation code does not work. Just says it's invalid. I had the same problem in 2014. At the time someone Adobe helped me through the phone.
The Master Collection is disabled the old Mac.
What can I do?
Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
- and more help in http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
-
Google, Yahoo searches return msgs "invalid Security Code?
Now when I do a search of Firefox (if Google, Yahoo, etc.), I get a "invalid Security Code" / train the message error "the certificate of the issuer is unknown. I do not understand why these sites could produce this result but afraid to substitute the error message care sort of interference of malware problem.
Hello, one possible solution depends on different factors:
- What is the error code indicated under Technical Details on the error page?
in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page (don't add it for real however) and inspect the certificate as shown in the screenshot
- What information about the issuer of the certificate contain?
Please report this information. Thank you!
-
Computer HP laptop-15: activation code/product key
I have the hp to access my computer remotely to fix the webcam. (before 90 days of free support was up). I never received the product key/activation code for cyberlink power dvd 14 media player cannot play the dvd on my laptop When I called to ask for the code the Tech refused to give me the product key so that I can use the software indicating that it was not their software, but I see that you can download from their web page. They can give me the code that I have ever received at first for $50. Anyone know where I can get the product key to use the software?
Hi @kat6973,
I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
If you are unfamiliar with the operation of the function of private messages of the Forum, this posthas instructions.
Maybe you are looking for
-
How to put an impulse on a guitar track?
Hello! Logic Pro 10.2.2. I remember in earlier versions of the logic, you can simply move WAV file pulse to the designer of the space. But now it doesn't work at all, so the question is how to put a pulse of WAV ready (ready) on the guitar track? Tha
-
Could not get WiFi to work on E1200
My 1200 v 1.0 was working fine until I tried to link a wireless internet camera. Apparently I screwed up something in the configuration as I lost my WiFi connection to my laptop and a desktop wireless. Fortunately my wired connection still works. I t
-
WMP600n wireless PCi adapter do not reconnect after sleep
I have a Linksys WMP600n PCi adapter installed in my desktop PC wireless and after recovering from the night before, he doesn't do not automatically reconnect. I have you right click on the wireless icon in the system tray, then select "repair". I
-
Restore the original Windows folder
Today, I accidentally merged my contacts folder with the folder of windows. I tried to move the folder 'contacts' my documents to a new location which ends up being the windows folder. now, when I go to local disk (c) it does not show a windows folde
-
BlackBerry smartphone keyboard light is off
How do I turn on the light for the keyboard?