Related issue FrameMaker table...

Similar Questions

• Store data related issues.

  Hello
  
  I am new to ODI. I have a couple of store data related issues. In fact, I am facing some problems, so I would like to have clarification.
  
  1. I imported the definition of a database table in a model. Later, I added a few columns to the database table. However, after having overthrown the model the new columns did not appear as a column in the data store. When I click on view the data, I could see the new columns. I expect that the new columns should have been displayed in the model tree.
  
  2. the key constraints have been defined in the database schema before reversing the model. However, these do not appear in the model. However, primary key constraints are listed.
  2A. I manually created the FK constraints in the model. On the definition tab, I gave the same name as it appears on the database. Also, I chose the type of the constraint as a reference database. And I checked activate on the database check box. These three steps are correct? The columns tab was completed as one might expect.
  
  These questions really (1 and 2), or am I missing a step? If I miss the point 2, to create the FK constraints manually, are my steps like 2 correct?
  
  I use ODI 10.1.3.5 and Oracle 11 g 2.
  
  Thanks in advance,
  
  Maury.

  Yes. You can install ODI 11 g at the same time at ODI 10 g.

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Select * from relational (< schema >. < table >)

  We had some mistakes the last few nights in our test database, during our DataPump to export every night. One by evening, different tables, but the two errors like:
  

  select * from relational(<schema>.<table>)

  I've never seen something like this before, and a Google search was not terribly useful. Any ideas what's happening?
  
  Thank you
  -= Chuck

  chuckers wrote:
  DB version: 10.1.0.4
  OS: Red Hat Enterprise Linux AS release 4 (Nahant Update 8) 2.6.9 89.0.16.ELsmp (64-bit)

  The error was an ORA-01555 snapshot too old.

  You hit 3654707 Bug ? Please check.

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• Issue of table + write to the file

  Hello, I am using USB-6009 with Labview 8.5

  I searched and passed tutorial table and still confused about acquisition of data...:)

  So here's what I'm doing (simple)

  I have two tension analog (AI0 AI1) returns through the DAQ assistant

  and I would like to follow up respectively and finally want to write them in lvm format or csv format...

  Question 1.

  Can I have an example of table VI with the DAQ assistant? all the tutorials I went on

  they are only about numbers--not the dynamic data...

  I think of... convert data into DBL and reorganize somehow to each table to the graph of the monitor

  Question 2.

  so I cut the data by using the table to display the monitor, then I will add both the value of the data in table

  to write to the file? or... is it possible to write in the file directly from the Daq Assistant, write on the file VI?

  Quesetion 3.

  If so, could you tell me how this writing on a file to save the data? 1st column with odd rank-> AI0

  1st column with the same line-> A1... something like that?

  Thanks, I spent about 3 hours of that, google them, read the help of labview and helped a lot

  1. you should be able to double-click the convert to Dynamic Data and convert the waveform in a table.

  2. just connect the output of the VI DAQmx Express write it on the Express VI of LVM.

• HP pavilion G4 Notebook Power Performance related issue

  The product name and number : hp Pavilion G4 - 101 5 dx Notebook PC

  Operating system : Windows 7

  Question:

  When I plugin the power supply, I play the game smoothly. BUT when I unplug the power supply the game starts to run slowly. The frame rate starts to become slow. The game is fully compatible with my computer. I have also kept the power to high-performance, but still does not work. Can someone help me with it? I can't afford to play the game in such a slow rate, when my computer is running on battery. This issue is not only with a single game, but with all of the others also...

  This issue could be due to the switchable graphics on your laptop. As soon as you unplug the device, the laptop uses the graphics card integrated to save battery, which reduces the FPS in the game and it starts the slow race.

  Open Catalyst Control Center and configure switchable graphics to use the ATI Mobility Radeon HD 4250 graphics card even when you run out of battery.

  You can find more info here

  http://support.HP.com/us-en/document/c02731962

• What advice to post cRIO related issues?

  Mr President.

  What advice should I post cRIO regarding Questions and doubts about my application with cRIO. Please help me already that I posted in motion control readers that my application is related to the command of the engine using cRIO.bu, I get no answer .i couldn't find any cRIO associated consultant Board option select.

  Hi illa,.

  You can post your query under the measure in real time and control

  http://forums.NI.com/T5/real-time-measurement-and/BD-p/280

• File access related issues

  Hello

  I use windows XP on my desktop.
  I am computer access Windows 7 from my desktop using Citrix receiver.
  My local office disks are mounted on the machine windows 7 that I can access through Citrix.
  
  After local drives are mounted there and when I try to access drives the on the remote computer for the first time, a window pops up asking the disk permissions (if read alone read writing etc.).
  By mistake I selected the "do the same for all readers' and selected reading only option. Now, all readers the mounted on the machine windows 7 have only read access.
  To change the folder permissions-
  I tried right-clicking on the folder and access to properties. But it is to say "the properties of this element do not exist.
  Please suggest me another method to change permissions of folder or cancel this option "do not ask me check."
  Kind regards
  Nanda

  Hi Nanda,

  I suggest you to report this issue in the Citrix Community: http://community.citrix.com/

  Thank you.

• Direct access the 4 G/LTE Verizon's internet connectivity-related issues

  During an attempt to access remotely via a Direct access to a tablet with 4 G/LTE from Verizon, we are unable to access the internet. Before the installation of a Direct access on the Tablet, 4 G high-speed worked fine, but once the Tablet has been recreated for a Direct access, we no longer had access to the internet. A call to Verizon revealed that the Tablet has been connected to the system of Verizon, but is was not connected to IPv4 or IPv6, and whether Verizon could not move forward. Are there Direct access settings that should be addressed in order to allow access to broadband (4 G SIM chip)? Thank you.

  Hello

  I understand that you are unable to access the internet during an attempt to access remotely via direct access on your tablet.

  To better understand the issue, please send us the following information:

  1. What is the brand and model of the Tablet you are facing problems with?
  2. The problem occurs on other laptop or Tablet?
  3. You are connected to the domain network?

  If you are connected to the domain network, you can post your request in the forums TechNet from the link below:

  https://social.technet.Microsoft.com/forums/en-us/home

  It may be useful, get back to us with the required information and we will be happy to help you.

  Thank you.

• Notebook HP 1000: Software related issue

  The direction of travel is reversed after Win 10 installed on my system.
  The driver has been installed through windows update. Is there a solution to this? It is the origin of the trouble when using the laptop.

  Hello @NadeemAkram ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 1000 and smile not scrolling properly. Here is a document on how to troubleshoot mouse and scrolling issues.
  If you go to the section marked setting scrolling.

  Hope that solves your problem with scrolling

  Thank you.

• two related issues: to call the stored procedure and passing in an array of elements using htmldb_Get

  I need to save items of ApEx generated dynamically via AJAX.  I use the APEX_ITEM API to generate the elements.  At runtime, I have no idea how much of elements are generated on the page, but I know that they're all separate and discreet 'name' attributes, i.e. f01, f02, f03, etc..  As a basic example, if I have to generate a selection list, I know that the parameter "p_idx" of the APEX_ITEM call is to say '3', so select all lists that get generated have a "name" attribute in "f03" DOM, all text elements will be "f01", etc.

  I want to record these data in the database using AJAX.  It is common to call the javascript htmldb_Get function that is standard for the use of an application process, but I am interested in the use of the rarely called upon 'internal' and queryString"options of this javascript function so that I can build the query string to the fly according to what is on the DOM when it tries to save the data they have entered into these items generated by APEX_ITEM.  Someone at - there are good examples of the use of the 'procedure' and 'queryString' the javascript htmldb_Get function parameters?

  I have found a handful of some blogs, messages, etc. online linked to this, but just for most people regurgitate the documentation.  I found this post (https://forums.oracle.com/thread/2549237), which has had a glimpse of hope to move from a table (which is something I need) as a parameter, but as someone in their right mind would check this before you go this route.

  Shane.

  ApEx 4.2.1

  Shane

  Since you mention that you are on 4.2 APEX I advise to use apex.server.process which is replacing the htmldb_Get officially undocumented documented.

  In the literature, it is that the first parameter is the ajaxidentifier but it's actually the name of the process.

  The data object would be something like

  var lData ={f01 : get_value_array('f01')}
  

  Where is get_value_array

  function get_value_array(pColumnName) {
    var l_values =[];
    apex.jQuery('[name="'+pColumnName+'"]').each(
     function(){
      var l_value;
      l_value = apex.item(this.id).getValue();
      l_values.push(l_value);
     }
    );
    return l_values
  }
  

  For an example see this demo.

  Nicolette

• Store XML in the schema issue generated tables and XML Validation against the schema.

  Hello friends,

  I am facing a problem where to store xml in a saved schema generated from tables.

  It's my diagram

  --

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < xs: schema xmlns:ds = ' http://www.w3.org/2000/09/xmldsig# "" xmlns: XS = " " http://www.w3.org/2001/XMLSchema "xmlns =" " http://www.ABC.inf.in/test "targetNamespace =" " http://www.abc.inf.in/test" elementFormDefault = "qualified" attributeFormDefault = "unqualified" > "

  < xs: include schemaLocation = "abc.xsd" / >

  < xs: element name = "project" type = 'student' >

  < xs: annotation >

  < Intention > it is a Documentation < / intention >

  < / xs: annotation >

  < / xs: element >

  < / xs: Schema >

  -This is my xml document

  "< project versão ="2.00"xmlns ="http://www.abc.inf.in/test">."

  "< test xmlns ="http://www.abc.inf.in/test">."

  " < intest version ="2.00"Id ="testabc"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "  >

  < ide >

  < cUF > 35 < / cUF >

  < cNF > 59386422 < / cNF >

  < natOp > This is post < / natOp >

  < indPag > 1 < / indPag >

  < mod > 55 < / mod >

  < set > 1 < / series >

  < / ide >...

  .....................

  Giving not complete because it is too long.

  1. I registered successfully of the schemas in the database

  2. then I generate the saved schema table

  2. in my java code I have validated the document XML schema compared and it's valid successfully.

  3 but when I recorded this XML file in the generated table there me gives error

  As:

  INSERT INTO XMLTABLE

  VALUES

  (XMLTYPE (bfilename('MYDIR','testabc.xml'), NLS_CHARSET_ID ('AL32UTF8')))

  Error report:

  SQL error: ORA-31061: error XDB: XML error event

  ORA-19202: an error has occurred in the processing of XML

  LSX-00333: literal '94032000' is not valid with regard to the model

  And I have to store this xml in tables of this so what I have to do?

  Thanks for your reply odie_63.

  I got this my solution for the error. My XML document is not well structured based on my registered XML schema.

  Average in My XML Document is an invalid value and which do not match my schema model so it gives this error

  SQL error: ORA-31061: error XDB: XML error event

  ORA-19202: an error has occurred in the processing of XML

  LSX-00333: literal '94032000' is not valid with regard to the model

  For the Solution, we have two ways

  1. I changed this literal value "94032000" in my xml file, then save it.

  2.

  -To delete this schema can

  -We need to change the schema for the particular element model

  like: -.

  -then to store xml in the database, it works...

  Thank you.

• No join in the request relating to 2 tables

  Friends,
  Today, I saw a strange plan for a query in TESTING DB. Although the 2 tables is involved, I don't see no join, HJ/NL/GYS!
  Can you please why this might happen?
  Note: I'm not face any problem of performance but curious to know what type of oracle optimization done here.
  It would be great if you could direct me the link in the documentation.
  
  
  The query text and plan:

  SELECT FIRST_NAME
    FROM CAMPA.TABLE_A
   WHERE NAME_ID =
            (SELECT NAME_ID
               FROM CAMPA.TABLE_B
              WHERE ban=:b1);
                 
  
  
  Plan hash value: 311916800
  
  
  ---------------------------------------------------------------------------------------------------------------
  | Id  | Operation                             | Name                  | Rows  | Bytes | Cost  | Pstart| Pstop |
  ---------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                      |                       |     1 |    12 |     2 |       |       |
  |   1 |  PARTITION RANGE SINGLE               |                       |     1 |    12 |     1 |   KEY |   KEY |
  |   2 |   TABLE ACCESS BY LOCAL INDEX ROWID   | TABLE_A               |     1 |    12 |     1 |   KEY |   KEY |
  |*  3 |    INDEX UNIQUE SCAN                  | TABLE_A_PK            |     1 |       |     1 |   KEY |   KEY |
  |   4 |     PARTITION RANGE SINGLE            |                       |     2 |    30 |     1 |   KEY |   KEY |
  |   5 |      TABLE ACCESS BY LOCAL INDEX ROWID| TABLE_B               |     2 |    30 |     1 |   KEY |   KEY |
  |*  6 |       INDEX RANGE SCAN                | TABLE_B_2IX           |     2 |       |     1 |   KEY |   KEY |
  ---------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     3 - access("NAME_ID"= (SELECT "NAME_ID" FROM "CAMPA"."TABLE_B" "TABLE_B"
                WHERE "BAN"=TO_NUMBER(:B1)))
     6 - access("BAN"=TO_NUMBER(:B1))
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE    11.1.0.7.0      Production
  TNS for HPUX: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  You have outside where a "condition of selectivity. Is similar to this.

  Select col1 of tab1
  where condition1 = 12

  In your case, select internal return scalar values (only one line, if he returned more files it will fail).

  Oracle data extract first query internal and it allows to search for lines in the external selection that the condition agree the line returned.

  HTH
  Antonio NAVARRO

• Issue of tables merging

  I currently have 11 tables that have a similar structure but different data and key primary in the primary key column, I want to merge all into a single table, I under 11G R2 XE with Apex 4.1.
  
  When applications have been created at the start we did a separate table for each office given that I was not as well versed in Oracle at the time, but now need all the data in a table, I can differentiate the data since there is a column of office that I can use to adjust the motion between apex applications , but the question I have, is that there is a BLOB column that contains an attached word (a resume) document.
  
  How can I go on the fusion of these paintings in 1 table, I don't mind merging one at a time, but I want to make sure we maintain that the data in the blob column.
  
  Here is the structure of the table, this is the same for all 11 tables, I want to merge everything in the table of SUBS, where each office table stands out as
  OFFICE-NAME_SUBS, thanks for any help.
  
  PKEY NUMBER
  DATE_SUB DATE
  CUSTOMER VARCHAR2 (4000)
  CANDIDATE VARCHAR2 (4000)
  RECRUITER VARCHAR2 (4000)
  SALE VARCHAR2 (4000)
  RESUME BLOB
  MIMETYPE VARCHAR2 (255)
  NAME VARCHAR2 (255)
  VARCHAR2 (4000) POSITION
  AVAILABILITY VARCHAR2 (4000)
  RATE VARCHAR2 (4000)
  QUESTIONS VARCHAR2 (4000)
  WHEN_INT VARCHAR2 (4000)
  NOTES VARCHAR2 (4000)
  VARCHAR2 (20) COMMENTS
  OFFICE NVARCHAR2 (30)
  REJECT THE VARCHAR2 (10)
  SIGNED_OFF VARCHAR2 (50)

  How can I go on the fusion of these paintings in 1 table, I don't mind merging one at a time, but I want to make sure we maintain that the data in the blob column.

  How many lines are there in total?
  Maybe you don't need any partitioning.

  Insert these tables in paragraph LOBs just will be inserted too.
  What is your concern?