What advice to post cRIO related issues?

Similar Questions

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Store data related issues.

  Hello
  
  I am new to ODI. I have a couple of store data related issues. In fact, I am facing some problems, so I would like to have clarification.
  
  1. I imported the definition of a database table in a model. Later, I added a few columns to the database table. However, after having overthrown the model the new columns did not appear as a column in the data store. When I click on view the data, I could see the new columns. I expect that the new columns should have been displayed in the model tree.
  
  2. the key constraints have been defined in the database schema before reversing the model. However, these do not appear in the model. However, primary key constraints are listed.
  2A. I manually created the FK constraints in the model. On the definition tab, I gave the same name as it appears on the database. Also, I chose the type of the constraint as a reference database. And I checked activate on the database check box. These three steps are correct? The columns tab was completed as one might expect.
  
  These questions really (1 and 2), or am I missing a step? If I miss the point 2, to create the FK constraints manually, are my steps like 2 correct?
  
  I use ODI 10.1.3.5 and Oracle 11 g 2.
  
  Thanks in advance,
  
  Maury.

  Yes. You can install ODI 11 g at the same time at ODI 10 g.

• Direct access the 4 G/LTE Verizon's internet connectivity-related issues

  During an attempt to access remotely via a Direct access to a tablet with 4 G/LTE from Verizon, we are unable to access the internet. Before the installation of a Direct access on the Tablet, 4 G high-speed worked fine, but once the Tablet has been recreated for a Direct access, we no longer had access to the internet. A call to Verizon revealed that the Tablet has been connected to the system of Verizon, but is was not connected to IPv4 or IPv6, and whether Verizon could not move forward. Are there Direct access settings that should be addressed in order to allow access to broadband (4 G SIM chip)? Thank you.

  Hello

  I understand that you are unable to access the internet during an attempt to access remotely via direct access on your tablet.

  To better understand the issue, please send us the following information:

  1. What is the brand and model of the Tablet you are facing problems with?
  2. The problem occurs on other laptop or Tablet?
  3. You are connected to the domain network?

  If you are connected to the domain network, you can post your request in the forums TechNet from the link below:

  https://social.technet.Microsoft.com/forums/en-us/home

  It may be useful, get back to us with the required information and we will be happy to help you.

  Thank you.

• Several media related issues with satellite A210-171

  I have an Equuim A210-171 which has a S-Video socket and a display ATI card I hooked up to my TV but I can't get a picture. I have implemented in the ATI Control Panel and have tried to connect before you turn on the TV, but still, this has no effect.

  Also, I tried to burn a TV show I recorded using Media Center (also used for the recording of the program). I have 2 problems...

  1. the burning process takes forever to fill
  2. the final result does not appear properly when played back on a DVD player. The menu appears and works fine, but when you start the program there is only what I can describe as diagonal lines appear on the screen. The sound seems fine

  I'm doing something wrong here or is this a known problem

  Concerning

  WA.

  Post edited by: Admin

  Comment: Son have been merged due to similar topics

  Hello

  To get the TV picture please do not follow:

  -Start your laptop and the TV turns
  -Connect your laptop with TV using the S-video cable
  -turn on the S-video TV port
  -use the FN + F5 key combination and go to the TV output setting

  I did probably 100 times with different TVs and it worked every time. Many people always make the same mistake the S-video port on television is not properly active and because of that don't here are either no picture or the picture is black and white.

  On the creation of DVD I can't say a lot right now, but I can say with certainty that I designed using Media Center DVD engraving option. I recorded some old VHS movies as mpg files and created DVDs with no problems. I don't really know what you're doing wrong.

  If you mpeg files also try to use another application to create DVDs. try with Nero. It is very powerful and I hope you do this successfully.

• Qosmio G50: HDMI to DVI output Monitor & other related issues

  I would appreciate more help with this one as literature and research provided no firm indication.

  Situation is that I am awaiting delivery of a G50-10 and a DynaDock, and before opening the box I want to be sure that I can achieve key objectives. In particular, I would normally (in do not travel) wishes to operate the laptop with two external monitors and the lid closed. Media functions are a secondary consideration for the use of this laptop.

  The two external monitors are 22 "1680 x 1050 with inputs DVI and d - SUB.

  It is difficult to documentation, what will happen in this configuration. So, my questions are:

  1.
  Port d - SUB on the G50 will deliver 1680 x 1050 at 60 Hz?

  2.
  The DynaDock DVI port will deliver 1680 x 1050 at 60 Hz?

  3.
  The HDMI port on the G50, when connected cable HDMI-DVI external display, delivering 1680 x 1050 at 60 Hz for use with Vista applications?

  Thanks in advance.

  Very nice post thanks for sharing this with us!

  By the way; This forum from a user to s ;)

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed

• Notebook HP 1000: Software related issue

  The direction of travel is reversed after Win 10 installed on my system.
  The driver has been installed through windows update. Is there a solution to this? It is the origin of the trouble when using the laptop.

  Hello @NadeemAkram ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop HP 1000 and smile not scrolling properly. Here is a document on how to troubleshoot mouse and scrolling issues.
  If you go to the section marked setting scrolling.

  Hope that solves your problem with scrolling

  Thank you.

• two related issues: to call the stored procedure and passing in an array of elements using htmldb_Get

  I need to save items of ApEx generated dynamically via AJAX.  I use the APEX_ITEM API to generate the elements.  At runtime, I have no idea how much of elements are generated on the page, but I know that they're all separate and discreet 'name' attributes, i.e. f01, f02, f03, etc..  As a basic example, if I have to generate a selection list, I know that the parameter "p_idx" of the APEX_ITEM call is to say '3', so select all lists that get generated have a "name" attribute in "f03" DOM, all text elements will be "f01", etc.

  I want to record these data in the database using AJAX.  It is common to call the javascript htmldb_Get function that is standard for the use of an application process, but I am interested in the use of the rarely called upon 'internal' and queryString"options of this javascript function so that I can build the query string to the fly according to what is on the DOM when it tries to save the data they have entered into these items generated by APEX_ITEM.  Someone at - there are good examples of the use of the 'procedure' and 'queryString' the javascript htmldb_Get function parameters?

  I have found a handful of some blogs, messages, etc. online linked to this, but just for most people regurgitate the documentation.  I found this post (https://forums.oracle.com/thread/2549237), which has had a glimpse of hope to move from a table (which is something I need) as a parameter, but as someone in their right mind would check this before you go this route.

  Shane.

  ApEx 4.2.1

  Shane

  Since you mention that you are on 4.2 APEX I advise to use apex.server.process which is replacing the htmldb_Get officially undocumented documented.

  In the literature, it is that the first parameter is the ajaxidentifier but it's actually the name of the process.

  The data object would be something like

  var lData ={f01 : get_value_array('f01')}
  

  Where is get_value_array

  function get_value_array(pColumnName) {
    var l_values =[];
    apex.jQuery('[name="'+pColumnName+'"]').each(
     function(){
      var l_value;
      l_value = apex.item(this.id).getValue();
      l_values.push(l_value);
     }
    );
    return l_values
  }
  

  For an example see this demo.

  Nicolette

• CF 11 Post update 3 issue - [SQLServer JDBC Driver] [SQL Server] procedure or a function expects the parameter which is not provided.

  Information on ColdFusion 11:

  Server details
  Server product	ColdFusion
  Version	11,0,03,292480
  Version of Tomcat	7.0.54.0
  Edition	Developer
  Operating system	Windows 8
  OS version	6.2
  Update level	C:/ColdFusion11/cfusion/lib/updates/chf11000003.jar
  Version of the Adobe driver	5.1.3 (build 000094)

  Sample error:

  queryError	[Macromedia] [SQLServer JDBC Driver] [SQL Server] Procedure or function 'ListClientDPReceiptFormat' expects the parameter '@idCient', which was not provided.
  where	(param 1) = [type = 'IN', class = 'java.lang.Integer', value = '4', sqltype = "CF_SQL_INTEGER"]

  Stored procedure:

  	< procedure CFSTOREDPROC = "ListClientDPReceiptFormat" >
  		"< CFPROCPARAM TYPE = 'IN' DBVARNAME ="@idClient"VALUE =" #Request.Client.Id # "" CFSQLTYPE = "CF_SQL_INTEGER" >
  		< CFPROCRESULT NAME = "qryDPReceiptFormats" >
  	< / CFSTOREDPROC >

  This stored procedure and other like it worked fine until the update from CF 11 3 has been applied.

  Thank you!

  It seems to be a typo here. Can clarify you...

  The error "[Macromedia] [SQLServer JDBC Driver] [SQL Server] procedure or function 'ListClientDPReceiptFormat' expects the parameter '@idCient', which was not provided."  the parameter defined as @idCient but your cfprocparam dbvarname = has ' @idClient'. .

  These are spelled differently.

  
  

  I think that this may be related to what is mentioned in this bug - Bug #3865064 - ColdFusion 11 3 CFPROCRESULT case update

  
  

  Adam Cameron notes:

  
  

  " Basically, then, it's a matter of the code in question was wrong, but the user has been getting away with it because the DBVARNAME was ignored. Now that it is not ignored, the code must actually be legitimate ;-). Very well, in that case. »

  
  

• Financial information and the related issue of content

  We want to launch a URL when a user clicks on a cell with a related content. However, we want to transmit to the members of the dimension of this cell (row, column, page, and POV) to the URL as a parameter.
  
  I can see when I implemented the related content between two reports she spends the dimensions, but it looks like it is in some kind of coded token.
  
  Someone at - he found a way to pass data of dimension as a parameter as described above (to a URL custom without encryption, etc.)?
  
  Thank you!
  -Jake

  Hey Jake,

  I think that if you create a custom link and put in something like $ http://localhost? $CONTEXT
  When you click on the link it will convert $CONTEXT$ in analytical information for example http://localhost/?attribute=Product.id.100&attribute=Year.id.FY09

  Is that what you are looking for?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I have updated to IOS 9.3.3 this morning. Since then my battery runs out very quickly and it loads very slowly. I read a post with similar issues and it was immediately rejected. I am convinced that this question took place directly after the update.

  I feel battery drain extremely fast and slow to load since the update to IOS 9.3.3. Any advice?

  Try the procedure described in this article to see if they help, especially to check background App update. Make sure it is OFF. Also, look under the battery as described in the article.

  http://www.Apple.com/batteries/maximizing-performance/

• iPod Classic not recognized whan connected to iTunes and related issues

  Whenever I connect my iPod classic to iTunes (Windows 10) is not recognized. iTunes then freezes after awhile of trying, it is recognized by iTunes. You can see everything on the iPod, but you cannot synchronize. Then I have to restore the iPod, but you can not recharge music etc. as the sync box has been ticked in the recent update. Then you can charge all your music which takes about 8 hours. WHY! Is this because Apple won't use their classic iPod more or what.

  See corrupted iPod Classic. What are the stats from HARD drive?

  TT2

• FPGA. What tool xilinx for Crio-9022 & 9030

  Hello. I will be compiling the programs of fpga on the Crio-9022 and 9030. You need Xilinx different compilers to do the task?

  With the help of LV ver14

  CRIO-9022 requires xilinxs 14.7 tool?

  CRIO 9030 requires the xilinx tools vivado 2013.4?

  Thank you

  Yes, it's because of the different FPGA series located on the backplane of the 9022 and 9030 cRIOs.  You can see this KB and this KBto see below why.

• Compatibility with software OR related issues

  Q1.
  GUARANTEED OR the fact that several (based on several engines of execution) LabVIEW EXEs wun simultaneuosly ono the same Windows XP computer, without fault?
  If not, what are the constraints?
  ex.
  LabVIEW EXE application created with version 7.1
  LabVIEW EXE application created with version 8.2
  LabVIEW EXE application created with version 6.1
  LabVIEW EXE application created with version 8.6
  all at the same time?
  I know that it works in some applications, but NEITHER GUARANTEE, it will be always be under Windows XP?
  What about Vista?

  Q2. As that NEITHER customer for several years, is it legal to have copies of several versions of the computer on the same labVIEW development environment at the same time?
  I am aware, it works at least on the machine, but is it legal?

  Q3. LabVIEW is really independent of the platform? What are the constraints that must be considered when porting an application LabVIEW between Windows, Linux or MAC?
  Seek not the entire list but the wise application design?
  some bulletpoints keys can be useful on the top links from document.

  Q4.  I have a software EXE that uses the API of VISA sandard calls. If I upgrade my NIMAX, it will replace library VISA was using my EXE?
  In both cases, this will affect the work of my EXE? If it does not, how to avoid this. My EXE can use old calls of VISa for years.

  Sandeepvd wrote:

  Q1.
  GUARANTEED OR the fact that several (based on several engines of execution) LabVIEW EXEs wun simultaneuosly ono the same Windows XP computer, without fault?

  I'm not sure it works flawlessy, but it shouldn't be a problem. Make sure you don't access the same resources (material, tcp ports etc.)

  Q3. LabVIEW is really independent of the platform? What are the constraints that must be considered when porting an application LabVIEW between Windows, Linux or MAC?

  Yes, they should be portable, but the Panel before may need to be redesigned. Also daqmx is limited on linux/mac. No activex or .net. When it comes to dll and you have a compatible library linux/mac, make sure that the extension is not specified in the VI call the DLL and have in the same folder (check out the screw daqmx for an example)

  Q4.  I have a software EXE that uses the API of VISA sandard calls. If I upgrade my NIMAX, it will replace library VISA was using my EXE?
  In both cases, this will affect the work of my EXE? If it does not, how to avoid this. My EXE can use old calls of VISa for years.

  I doubt that VISA is modified AND not to be backward compatible, I've never had a problem with that.

  Tone