Related point using the loop without shutdown problem?

Similar Questions

• Why is the Table in the loop without delay time flashing

  Hello everyone

  Why I put Table in the loop without any delay, the front table still flashes?

  How can I avoid this situation?

  This situation is related to the level of the PC?

  

  Hello

  This problem was presented as a request for corrective measures, several years ago although there always seems to be involved.

  Sometimes this is because the table is constantly updated, but at a slow pace, enough to be visible. If you place a Boolean button on the table on front panel indicator and make transparent (I used a Cancel button that uses a locking mechanism when released), this will force off update screen and flashing minimum.

• After 4 years of use my computer without any problems at all, I get a message saying that my copy of Windows Vista is NOT activated.

  Original title: Vista Activation issue

  After 4 years of use my computer without any problems at all, I get a message saying that my copy of Windows Vista is NOT activated.

  Of course, he was and has been deleted now tile view! I made no changes to anything on the computer, so I did a little research

  and found that it could be a virus trying to get 'paid' for a new activation code. I did a complete reinstall of Vista to remove

  such viruses or errors and it still say my copy of Vista is not activated. When I try to follow the steps to activate Vista,

  I got nowhere! Everything I've read say s do the activation of the phone, but my computer doesn't give me the option of phone!

  It gives me only 3 options - "Buy a new online product key", "Enter a different product key", "Contact Hewllet Packard to help solve this problem."

  I called HP and of course my warranty has expired and they even want to talk to me about $100! I'm going crazy trying to figure this out! Help someone?

  Thanks for the reply, but I tried ALL the links you've posted over and over again until I've already posted my question here! The links you suggested sent me round in circles! They say all "choose the Activate by phone option" but I was not getting the phone option on my computer for some reason any.

  I have corrected the problem and HERE IS HOW - 1-800-Microsoft

  It was as simple as that! Now, if only they post this number somewhere here on the site it might save people hours or days of research! After calling the number, work your way through the automated system until you get a man! The guys at Microsoft that answered the phone was great and had activated me and up and running in minutes!

• How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe is reall

  How to remove the trial version of Acrobat DC 30 days that I have somehow on my MacBook Pro?  I don't want the dang thing, and it prevents me from using my Acrobat Pro 11 software.  Trying to access using the tree without end of support for Adobe of really making me cranky.

  Hi thomh65004143,

  You simply drag the Acrobat DC application from the applications folder to the trash to uninstall.

  Then restart your system & install Acrobat XI Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Definition of white/black Points using the tone curve

  I am trying to install white/black points using the tone curve, but when I try to drag one of the end points of the line in the tone curve tool, I can't move. Could those be locked somehow...?

  It is what it is supposed to do. Without the sliders, you work with the curve itself. Now, you have direct control of the curve and can drag any part of it. Have you thought in your white and black points using the whites and blacks in the base Panel while holding down the opt/alt key? I guess the reason why what he says point curve is because this icon is what allows you to curve to the point.

• Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello.  Y at - it a means or an application to stop locking the screen EXTREMELY annoying on the Apple Watch.  It's clearly a myopic element for the Apple team because I can't even use the timer without being incredibly bored.  Thank you.

  Hello

  You can enable the detection of wrist as well as an access code and unlock it with the iPhone:

  • On your iPhone, in the application of the watch, go to: My Watch (low left tab) > General > wrist Detection - this turns on.
  • On your iPhone, in the application of the watch, go to: Watch My > Passcode > Passcode turn on (choose a Simple 4 digit access code or a longer).
    • Also in the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually or unlock your iPhone. Then, it will remain unlocked until you delete the monitoring of your wrist, when that it locks automatically.

  You can also set your watch to the screen to reactivate automatically when you lift your wrist, even select what is displayed on the screen to wake up:

  • On your iPhone, in the application of the watch, go to: Watch My > General > screen Wake:
    • Active screen Wake on revival of wrist, and;
    • Choose if the watch should resume last activity or see the Face of the watch.

• When I try to use the Skype window having problem

  When I try to use the Skype window having problem

  Hello

  you don't say what problem?

  and if the problem only occurs when using Skype, ask the Support of Skype

  https://support.Skype.com/en/

• If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  If I buy one Prime Minister prepaid by annual pro adobe application, after the after the end of the subscription of one year it would be possible to use the program without updating or should I pay each year?

  You will not be able to use the program after the end f the subscription, unless you continue to subscribe.  The only way to use Premiere Pro without subscription is to buy the CS6 version.  Remember that projects CC is not properly open to the CS6.

• An associative array, how the records using the loop counter?

  In the associative array, how the records using the loop counter? for example
  

  declare
      type population is table of number index by varchar2(64);
      city_population population;   
  begin
      city_population('Samillve') := 200;
      city_population('Lindenhurst') := 300;    
      
      for i in 1 .. city_population.count
      loop
          dbms_output.put_line(city_population(i)); -- compiler error
      end loop;
  end;
  /

  That would look like

  SQL> ed
  Wrote file afiedt.buf
  
    1  declare
    2      type population is table of number index by varchar2(64);
    3      city_population population;
    4      l_index varchar2(64);
    5  begin
    6      city_population('Samillve') := 200;
    7      city_population('Lindenhurst') := 300;
    8      l_index := city_population.first;
    9      while( l_index IS NOT NULL )
   10      loop
   11          dbms_output.put_line(city_population(l_index ));
   12          l_index := city_population.next(l_index);
   13      end loop;
   14* end;
  SQL> /
  300
  200
  
  PL/SQL procedure successfully completed.
  

  Justin

• Using the loop will decrease performance

  Hello
  Using the loop with a query will decrease performance.
  
  for r_row in (select * from table) Loop
  end of loop.
  
  This is done within another loop for, more cases, it returns a single value.
  It will decrease the performance of the procedure.
  kindly advice...
  
  Kind regards
  Balu

  user575682 wrote:
  Using the loop with a query will decrease performance.

  for r_row in (select * from table) Loop
  end of loop.

  This is done within another loop for, more cases, it returns a single value.
  It will decrease the performance of the procedure.

  Perhaps better understand everything that makes this PL/SQL loop construction.

  PL/SQL is two languages. It's PL (logic programming code) like Pascal, C or Java. You can use a 2nd language in it called SQL. The PL engine will be able to recognize when the 2nd language is used. And it compiles all the things that are necessary for motor PL call the SQL engine, pass the data to the SQL engine and get back data, etc. (compare this with the complexity of the use of SQL in Pascal, C or Java language).

  So what's this loop? The PL engine recognizes the SQL SELECT statement. It creates an implicit cursor by calling the SQL engine to analyze (I hope a soft Parser), then run it.

  As part of the loop of the PL, the PL engine now calls the SQL engine to extract data (lines) of the cursor. With 10g and later, the engine of the PL is smart enough to use the implicit treatment in bulk.

  Before 10 g that he used to extract a line from the SQL engine, make the loop, the next line extraction, the loop, etc. In other words, if there is a 1000 lines to pick up, he'll call the SQL engine after 1000.

  With 10g and later he get a 100 lines, which store in a buffer internal and then make the loop once 100. With a 1000 lines to fetch, it requires 10 extractions in bulk instead of one 1000 rank of extractions.

  These extractions require a change of context - as the engine PL must not out back, and in the SQL engine to extract a line. It is an overhead projector and can become so slow the context switch nothing more.

  And it's the construction of bases for this loop (and most other cursor loops) in PL/SQL.

  The ideal is to reduce the number of context switches. It is an overload that can have an impact on performance.

  What about using a loop in a loop. As 'bad '. This example uses the outer loop to retrieve the data. These data are then used to excite the extraction in internal or nested loop. The outside loop draws data from the SQL engine in PL variables Inside loop drives that same data back to the SQL engine.

  Why? It would have been much faster not to pull and push data between the loops using PL.

  It will be much faster do so only through SQL. Write the two loops as a single SQL statement and have the SQL engine directly driving these loops itself. This is called a JOIN in SQL. And the SQL engine can do not only more quickly, but it has a few algorithms of multiplied can be used which are even faster than a nested loop process (called merge joins, hash joins, etc.).

  Bottom line. Optimize SQL. Reduce to a minimum the PL. *

  Do as much of your data, crunch in SQL as possible. SQL is the fastest 'place' and process the data. No PL (or C/Pascal/Java).

• C6180: To avoid damage, use the power button / shutdown - message does not disappear and the printer is looping

  I have problems with my printer since arriving to a new home. I stop the printer before removing the cable, but seems could have pulled the power cable earlier than closing down.

  Since that time, the printer is looping with message "to avoid damage to use the off button /...» "- How do I stop and work again.

  Please help!

  Thank you.

  Heck!

  I was really hoping that would not be the issue.

  So, if I understand it, the question you receive looks like this;

  "It lights up and shows the HP logo and process bar animation for one minute, followed by the message:"abnormal termination. "  To avoid damage use on the button to turn off the printer.  Do not use a wall or the band switch to close.  Press OK.  Then he stops and leaves upward. »

   

  Try this:

  1. If the printer is still on, unplug all rigid and flexible cables at the back of the printer.

  2 unplug the power cord also from the wall...

  3. wait for two minutes.

  4 reconnect the power cord to a wall outlet first.

  5. hold the pound (#) and six 6 buttons.

  6. all by pressing the two buttons, reconnect the power cord to the back of the printer and at the end of two seconds, exit book and six buttons.

  7. turn on the printer if it goes out...

  Third times the charm, right? * fingers crossed *

   

• Excerpt from my table using the loop For

  Hello

  I have this loop to create a 2D array. The result is on the table below. I want that this 2D table should be fully completed and compiled, then it will be sent out of the loop.

  I don't want to extract the value of table 2D is a loop. This is the problem that I am facing.

  My ultimate goal is to extract the individual number of the final table of the 2D table line and be an entry for other functions.

  Please help me. Thank you

  PX

  Hi PX.

  Here's a solution without using screw express

• Inserting data in several related tables using the database

  Hello world
  I'm working on a BPM application using Oracle BPM 11.1.1.5.0 and JDeveloper 11.1.1.5.0.
  
  In my database, I have two tables, loan and guarantee that are related by a field named employeeID (PK on loan) and FK in warranty.
  Each line can have several lines of guarantee.
  
  At this point, I'm doing an entry form for the user to insert data in the two tables.
  
  I did successfully before with a single table that has no relations.
  
  The way I'm doing here is, after the creation of the database successfully adapter, a type of LoanCollection is created in the types module, which can be used to create business objects and data objects of.
  
  The problem is when I create an object of type loanCollection process data and then create a UI generated automatically on that basis, only the fields in the primary table (the Table of loan) appear in the form.
  On the other hand, if I create a business object based on the LoanSchema, the form for all of the two tables is created automatically (the loan as a form, the guarantee in a table), but then, when I try to access it in the section processing service mission which calls the database adapter, I have no access to such.
  In fact, the only type which can be used in the service task is the process based on the loanCollection data object.
  
  To summorize, I have to use the type of business for my UI object to include all the fields in both tables, so I have to use the data object from the collection process in the transformation of service task dialog box.
  And I can't find a way to map to another.
  
  Can someone help me with this please?
  Thank you very much

  Try to follow these steps.

  1. create a new module in your catalogue our BPM project management section
  2. in this new module create 3 Business Objects - (LoanBusinessObject, GuaranteeBusinessObject and GuaranteeArrayBusinessObject)
  3. Add the attributes appropriate to the LoanBusinessObject and the GuaranteeBusinessObject so that they mimic your database tables, then to the GuaranteeArrayBusinessObject add an array of type attribute GuraranteeBusinessObject
  4. now you need to create two process data objects, type loanProcessObject LoanBusinessObject and type guaranteesProcessObject GuaranteeArrayBusinessObject
  5. as inputs to your human task adds the loanProcessObject and guaranteesProcessObject, these should now be available in your data controls and can be used to auto generate the form
  6. in your dbadapter you'll then use XSL Transformation and use for each so that it will write the data to the ready table and all the line items of warranty for the warranty table.

• Incorrect display using the loop format for

  Hello

  I have a digital painting using a hexadecimal display format that is autoindexed by a loop for. Within the loop for each unique value is passed to a Subvi needed the hexadecimal display format. Unfortunately, indexing is not keep this hex format but transfers back to a decimal number.

  No idea how to solve this problem?

  Thanks in advance and best regards

  Simon

  Thanks for this tip. The problem was an another Subvi where I created the num-array that will subsequently in the loop for., all the digital elements where the value instead of I32 I16. The controller could not handle these false values, so I got a nonsense.

  Thank you very much for your quick responses!

• decimal to binary conversion using the loop

  How to create a LabVIEW program to convert a decimal number to binary equivalent using FOR loop?

  can someone help me please...

  Dhass, your sound question as a duty. Is this correct?

  If so, the zip code you have already so that we can identify the weak points in it.

  Tone