Satellite P200-199 - Win XP: does not work Fn + F5... Keys Fn + F9

I had to install Windows XP on Satellite P200-199. After installation, Toshiba Hotkey Utility consists only of keys Fn + F3 and Fn + F4 and I can't change the brightness of the screen. How can I solve this problem? All programs and drivers XP downloaded from the website of Toshiba and installed correctly. BIOS version is the last (1.7.0). I can't work under Vista, and I choose Toshiba only for possibility of installation of XP :). If there is a way to change the brightness of the screen without hardware key (i.e. through a program or applet control), it is acceptable too.

Thank you.

P.S. On the Toshiba site, there is no version of Toshiba power saver utility for XP (for Satellite P200), but I try to install 7.08.05 version - there doesn't work (CANNOT be opened because you do NOT have right to "TOSHIBA Power Saver"). I have administrator rights (Administrator installation).

Post edited by: SweN

Hello

Have you installed all the drivers in the correct order?
Installation file instruction txt on the Toshiba page shows you the step by step guide line that the order of installation is necessary!

With regard to the issue of keys FN;
To my knowledge, the update of the BIOS is necessary. BIOS 1.7 - winner is not designed specifically for the XP operating system and therefore, it may happen that after the installation of the operating system XP, some functions don't work properly!
Unfortunately, I didn't find another version of BIOS for the P200-199 PSPB0E series.

See user's last message * vjkostas *.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24798&TSTART=0

Concerning the issue of energy saving;
The bomber screensaver utility and the Poser saver driver are available on page. I think first of all the pilot, and after restarting again the standby electricity utility must be installed.
But take a look at the installation instructions.

concerning

Tags: Toshiba

Similar Questions

  • Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

    After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

    Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

    Hello

    you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

    It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
    Would appreciate comments on your success.

    See you soon

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

  • Satellite L855-149 - Synaptics touchpad does not work after upgrade to win 8

    I Hare recently upgradedmy Toshiba Satellite L855-149 to the most recent version of windows 8 6.2 and since I did then the Synaptics touch pad stopped working, I guess because the driver does not work with this version of windows 8. What can I do to fix this so I can use my computer without a plug in the mouse again?

    Thank you
    Simon

    Thanks for your comments!

  • Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

    I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
    The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
    I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

    Probably for a lot of traffic on the connection

    Were you finally able to download the driver?
    I could download the package without worrying about performance too

  • Satellite R10-101: touch screen does not work in tablet mode

    Hello

    I just bought a Satellite R10-101 laptop / tablet.

    The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

    When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

    The touchscreen should be enabled or that I have to get a Toshiba stylus?

    The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

    Thank you for any help or advice.

    Joe

    Post edited by: Joe Blow

    Hello

    The display panel works as a touch sensitive digitizer screen.
    You need the stylus to use the touch screen in tablet mode.

    I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

  • Satellite P200 - 1FC - CD/DVD does not read discs

    I have a Satellite P200 - 1FC ' CD/DVGW TSSTcorp TS-L632D ATA Device will not read CDs or DVDs and do not respond. Device Manager shows that this device does not work correctly.

    Can you please help?

    Hello!

    Try to remove the drive from Device Manager CD/DVD, and then restart the laptop. It work?

    If this isn't the case, you should try to remove the upper and lower filters:
    (1) run Regedit (start-> Run-> Regedit)
    2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Good bye

  • Communication satellite U500 wifi switch control does not work

    Hello

    I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

    When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

    I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

    Thank you very much for the reply. Tom

    Hello

    Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

    Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
    http://APS2.toshiba-tro.de/WLAN/

    Welcome them

  • Satellite Pro L850 - keyboard / touchpad does not work

    Hi all!
    I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
    I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

    It seems that this is not a cause of hardware under the work of bios keybord problem.

    Extra I have updated the bios last version 6.50, but not noticed any changes.

    Please help me with this question, cause I don't have any idea what to do now.

    Good day and w8 for answers

    PCZ

    PS. external keybord on usb work!

    Post edited by: pcz

    The whole story seems incredible. Keyboard and new laptop does not work?
    Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

  • Satellite C50t-A-10J - bluetooth does not work

    I have acquired a Satellite C50t-A-10J but bluetooth does not work. I don't think it worked. If I can test it? Is the bluetooth in the wifi module? How to replace the module?
    Thank you in advance.

    I have acquired a Satellite C50t-A-10J but bluetooth does not work. I don't think it worked. Tried to remove and reinstall the drivers. If I can test it? Is the bluetooth in the wifi module? How to replace the module?
    Thank you in advance.

  • Satellite L500 1QK - output HDMI does not work with a Toshiba DVD player?

    Hello

    Why Toshiba DVD player does not work when I plug the HDMI out on my other bigger screen...

    While he plays well the DVD on the computer and, if I can get the signal HDMI OUT with VLC playing other video formats...

    I hope there is a way to unlock this, because I prefer to play DVDs on my computer (for his problem because I have the ear is not good)

    Thank you in advance for your help, if you can.

    Kind regards.
    Mylène
    (Satellite L5001QK France)

    Hello

    To be honest I n don't know 100% what your problem is.
    If you want to watch DVD movies on your computer with the help of a reader DVD Toshiba but the captain must be indicated on the external screen follow these steps:

    When you have connected the HDMI cable (other) outside on the screen, use FN + F5 and switch to the external display only. When you see the desktop on the beginning of the display external Toshiba DVD player and I think that everything should be OK.

  • Satellite L300-22R - fan control does not work on Ubuntu

    Hello together,

    I have a problem with my Satellite L300-22R model PSLB8E-0QL028GR (Ubuntu 8.10) and the fan control. At first the fan does not work. After a few minutes, the fan operates at 100% until the laptop is turned off. I think it's a problem with acpi.

    The BIOSis: InsydeH20, worm. 1.60. There is not a more recent.

    Thank you for your support.

    Hello

    Is this laptop model is not supported for Linux and everything you find on the Toshiba download page (updates to the BIOS) is for the use of Windows XP Home/Vista edition only. :(

  • Satellite A300-20 b - Touchpad does not work after BIOS update

    I've updated the BIOS on my Satellite A300-20 b latest version 2.00. Update succeeded, but when I rebooted system touchpad has stopped working.

    I tried to find the solution, resettled drivers (windows XP system). In the Windows Device Manager there is no problem with Synaptics PS/2 Port Touchpad, I see. Software Synaptics shows no problem I can enable and disable the touchpad, but it does not work for the touchpad. I tried Linux live CD and in this system does not work as good touchpad. I think there is problem in this version of the BIOS.

    Does anyone have the same problem?

    Hey Buddy,

    Have you tried to turn the touchpad on or off if you press FN + F9? Check this please!
    Also, try to load the default settings in the BIOS.

    What happens if you connect an external mouse to the laptop? It work?

    I can t imagine that the BIOS update causing this problem. If it doesn't work, you need to contact a service provider for help. They can check the touchpad and replace.

  • Satellite C660-11W - Num pad does not work

    Hello!

    I have a Toshiba Satellite C660-11W, which I bought 10 months ago. Since October, the num of my laptop keypad does not work, but when I press the "Num Lock" button, it makes a noise as I had turned on the StickyKeys.

    How can I solve this problem?

    Hello

    Looks a bit bad operation of the keyboard.
    I think that the service technician if you want to initialize the digital keypad function by Test & Diagnostic software and will replace the keyboard to fail the test.

  • Satellite Pro C650 - cooling fan does not work

    My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

    Can someone tell me exactly what the problem is? And how to solve it.

    Thank you.

    > Can someone tell me exactly what the problem is?
    On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
    Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
    Problem can be power.
    Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

    What do you think?

Maybe you are looking for

  • Satellite 1905-S301: laptop model name Virus has changed?

    I think that my Satellite 1905-S301 has been exposed to a virus. This is the worst I've ever seen: he has removed my firewall (Zonealarm), antivirus (AVG free) and Spybot. disabled Center Windows XP security, firewall and automatic update; I am unabl

  • How can I remove Windows Photo Gallery. I prefer Microsoft Digital Image

    When I try to work with an image, the selected image goes directly to the windows photo gallery that I don't like.  How can I remove Windows Photo Gallery so I can use Microsoft Digital Image I prefer?

  • connection with the base switch

    im running windows server 2008 with cisco switches, but when I connect a switch to one of my drops and add more than one computer to the switch, that it is not connect the computer that a network is running the rest does not get why?

  • Problem of PlayBook and DIV

    Hello I am developing a basic application by using the web development kit and I'm running a problem with some divs. I have a div that displays a button, and when you click the button, the div is hidden. The button calls a javascript function that af

  • Try to run a SQL statement through the window of OEM 12 c run SQL.  Statement fails

    All,I have a 11g database.  When it is initially installed, I installed it in $ORACLE_BASE = / orabin/app/oracle/product and $ORACLE_HOME = $ORACLE_BASE/11gDB_R2.  This is the version 11.2.0.1 to give birth to 11.2.0.3.Recently, I installed 11.2.0.4