Related to behavior but not

Similar Questions

• CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work t...

  CS4 on Windows 10 seems to be broken... at least I can't clone. Before that, Silver FX and the related add ons did not work. I would like to remove and re-install Photoshop CS4 on Windows 10, but I'm afraid that none of these upgrade CD I will work... they are all dependent on a previous installation. If I remove photoshop and try to use the CS4 install disc I have, it fails? Will I need to re - install Photoshop 5.5 and each single update since then go to CS4?

  You need not install older versions in order to get the last update enabled.  During the CS4 activation process, you can specify the eligible previous version (choose the oldest among a list, then enter its serial number).  Choose any one you had just before CS4.

• iPad displays in iTunes but not Windows 7 computer menu

  I have an iPad 3rd Gen (Wi - Fi only) with iOS 9.3.5 and I just updated my iTunes to 12.5.1.21 64-bit.

  now, it will not be displayed in the windows for me transfer photos. but it appears in iTunes and I can see here, but I want to transfer pictures manually.

  in devices and printers, it is listed under Unspecified as Apple Mobile Device USB Driver. in Device Manager, it appears only as Apple Mobile Device USB Driver, and when I check the hardware ID, it is USB/VID_05AC & PID_12A4 & REV_0310.

  I uninstalled iTunes (and all the modules of Apple) and reinstalled, rebooted the iPad AND computer, tried stop and start the Apple Mobile Device service and MANUALLY install the driver in the folder files, as it says on the Apple site.

  am I missing something, or is iTunes 12 just broken?

  Hello darkflux88,

  Thank you for using communities of Apple Support.

  I see that your iPad is recognized by iTunes, but not by the Windows 7 system. I have three support articles that relate to your problem. The first is more relevant for the iPad being not recognized by iTunes, but also contains information for the Windows operating system. The other two relate more directly to Windows does not recognize is not the iPad.

  If iTunes does not recognize your iPhone, iPad, or iPod

  Solve the problems between iTunes and third-party security software

  Remove and reinstall iTunes and software components related to Windows Vista, Windows 7 or Windows 8

  Best regards.

• Downloading files over 2 meg are missing in Firefox but not Chrome or IE

  I have a problem when using Firefox to download files in cPanel and even in WordPress when adding themes or plugins. It will download WordPress plug-ins, but I think the point that it starts failing is when the plugin zip file is complete 2meg. It is not related to the server I checked it it works fine in Chrome and IE.

  I refreshed Firefox and deleted all cookies and cache several times.

  I think it may have started after upgrading Windows 10 but not positive.

  Separate the issue;
  Shows details of the system;

  Plug-ins installed

  Adobe PDF plugin for Firefox and Netscape 15.8.20082
  Adobe PDF plugin for Firefox and Netscape 10.1.15
  
  Having multiple versions of a program can cause problems.
  You must remove older programs. Then download the current full installer.

• I never had trouble with my server out log out before. I'm travelling and my first day I can receive but not send mail. I went through all of the suggestions of support, nothing helps. I can not send emails. I El Capitan on my Mac

  I have a macbook of El Capitan and my first day on vacation to halfway around the world, I can receive but not send emails. I had a conversation with my provider and all the settings, usernames and passwords are correct. I tried everything I read so far related to this topic from Apple and I can not send. Any other suggestions?

  What happened to me several times over the years, as different local networks may not connect in order to SEND email but without reception problems.

  My solution is to always use the WEBMAIL service belonging to the service of your email provider... be it Apple or Blueyonder, or anyone.

  Occasionally, a national internet service - for example; the Sultanate of Oman, in my experience - can refuse to deal with mail because the discussion on a particular topic is not permitted in the jurisdiction of that country, but it is very rarely the problem. Try just using the webmail online pages - for example; webmail service to iCloud in the case of an Apple (.mac, .me, .icloud) email address - and who usually works for me, anyway.

• I send you emails as usual with windows live hotmail, now they are sent but not received?

  emails

  I send you emails as usual with windows live hotmail,.

  now, they are sent but not received?

  Your question is related to hotmail and would be better suited in the Windows Live hotmail Solution Center, where one of the experts in this area would be better suited to offer you a solution.

• Windows live mail has stopped working properly. Can view the Inbox but not send e-mail messages. Send a message: problem with page caused either to stop working.

  My windows live mail has stopped working correctly: I can view my Inbox but not send emails, because a box appears and indicates a problem with this caused page internet explore to stop working. This seems to be connected to the other problem I have with windows live messenger, who says his side by side configuration is incorrect.

  I uninstalled windows live essentials and reinstalled it but still the same result. Have also installed all updates via the windows installer.

  I am close to throw the computer because the problem seems irreparable: HELP!

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• Windows Media Center plays soundtrac film but not the video.

  My Windows XP Media Center plays the soundtrac of movies but not the video.

  The display shows the similar factals when music is played.

  Latest WMC has been installed

  Any ideas?

  Hello

  1. do you know the file type you are trying to play?

  2. this happens with all DVDs you play?

  3. do you get an error message?

  Step 1: Try to update the codecs to check if the problem persists. See the below mentioned the Windows Help article.

  Codecs: Frequently asked questions

  Step 2: Check if you have the latest video drivers installed on the computer. You can log on to the computer for the same manufacturer site. Also, check the latest Windows updates. Check if all related drivers are available in the optional updates.

  Install Windows updates

  Step 3: Adjust graphics hardware acceleration. To do this, follow these steps:

  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.

  b. click on advanced settings.

  c. click the Troubleshooting tab, and then click on change settings.

  d. move the hardware acceleration slider two notches to the left of Full (the Disable cursor and bitmap accelerations setting).

  e. click OK, and then click Restart now.

  I hope this helps!

• 100.0 Mbps, but not the acquisition of intellectual property

  100.0 Mbps, but not the acquisition of intellectual property

  Hello manicuredlawns,

  This sounds like the behavior of the specific virus. You have already run a full system scan with your anti-virus security software?
  You may need to do this in Mode without failure to a complete analysis of the system:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  I suggest to choose Safe Mode with network on see if the network connection works differently.
  Also try a restore of the system in safe mode to see if it makes no progress:
  http://support.Microsoft.com/kb/304449

• Why not then a receipt of emails but not send emails.

  I have XP and Windows Live Mail to manage multiple messages.  I had no problems until yesterday.  Now I can send my hotmail address but not my other 3 addresses of e-mail - q.com, daisymountain.org, or msn.com.  On the one hand, I deleted and reloaded, but it does not work.

  Hi AnnHutchinson,

  The question you have posted is related to Windows live mail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=15

• hard drive is seen in bios but not in windows vista installation

  Hello, I have a hp ze2315us pavilion which is also a hp pavilion ze2000 cto, I have 1 GB of ram, a disc 60 hard IC25N040ATMR04 Go-0-(PM) and it is part of the bios and I had vista installed previously, but there was a corrupt file so I formatted and deleted the partition so there is all the space unallocated, then I restarted the computer and the disk still appears in the bios , but when he said where would you like to install the operating system it says theres no HDD found please help! Also, I try to install vista home basic 32-bit edition

  Hi hp pavilion ze2000 cto.

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with the hard drive in the bios but not appear in the windows vista installation.

  Given that the problem is related to the BIOS and a hardware malfunction as possible, I suggest you to contact the manufacturer of the computer for further assistance regarding this issue.

• WRT54G - Internet connectivity failure - everything seems to work, but not online

  I have a WRT54G V8 router, who is 18 months old. Its used by 3 laptops to connect to the Internet (Wi - Fi all). All 3 laptops unable to connect all of a sudden. Steps are taken to solve the problems, still no luck. Please suggest if something else can be done.

  1. first test was to remove the router and connect a computer directly to the modem via a LAN comcast cable. Internet is available

  2. I have hard reset the router and configured again. No luck

  3. check the connectivity to the Internet through ports 1 to 4, no luck

  4. I can see the available signal and connect to the network, but not internet connection. I see the cell as shown (all dynamic) IP address obtaining

  5. I upgraded the firmaware to 8.0.6 version and and not set up once again, no luck (same as step 3 & 4)

  6. removed the WEP security, does not

  7 soft reset on the router (via the admin page reset to factory settings), no luck

  LED status

  Power - on and yellow

  Cisco - on

  WAN - SUITE

  Internet - ON and flashing

  Lights of port - when a laptop is CONNECTED

  I see the excellent signal strength and all laptops can connect to the network, but cannot go online. Google chrome shows a message hosting "solve" until timeout. Laptops show a 192.168.1.XX IP address. 4 ports are also not connect to Internet (mobile one GETS IP address via the ports as well)

  I have no other options left. I've seen a similar thread here (http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2288), but no response. Please suggest what to do next.

  Okey, I finally found the problem. His Modem.

  Router is not able to get the IP address of the modem if the modem is started first and then I plug the internet cable to the router. But if I keep the router and modem connected and then reset the modem while keeping the router powered on, the router receives an IP address.

  And in both cases, if I connect the laptop with the modem directly, computer laptop can connect to the Internet.

  I bought a new router (WRT54G2) thinks that the problem is with the router, and I can reproduce the same behavior with both routers constantly.

  Make sure you modem is Motorola surf.

• I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

  I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

  Hi Marty_McGrath,
   
  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• LaserJet CP1025: Printing pink spots on the first page of all documents Word and PDF but not Excel etc.

  This printer has had very little use again, last September. This problem started about 2 weeks ago. It affects Word, PDF files and print from Chrome.

  Excel, Publisher and Notepad all print correctly. It affects only the first page of the documentation. Printing multiple one after another - first page only of each doc is assigned along the right edge together about 1 inch wide.

  My office programs are on my school's network. No other users have the same problem and impression on my inkjet at home is fine. My solution is to add a blank page at the beginning of Word documents.

  It seems that it is only this printer is affected, but I do not understand why some programs are affectd but not others.

  Ideas would be welcome.

  Hi @Fortwilliam,

  I see that you are having problems printing applications, the first page has pink spots on the right side of the page. I want to help you.

  It's certainly an issue that you are experiencing. Since it is not done this with all applications. So I don't think it is a hardware problem, but related software.

  Make sure that you are logged on as an administrator and try to print again.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you're still having problems, I uninstall and reinstall the latest version of the printer software, just to rule out a software conflict or the printer driver is damaged. Full Feature software and driver.

  If you appreciate my efforts, please click on the button below the thumbs up.

  If there is anything else I can help you, let me know. Thank you.