Relationship between the Application and the data group

Similar Questions

• What is a relationship between the data store and LUN?

  Hello

  I added 3 LUNS to a data store, but I can't list them since the MOB data store. Could someone tell me how to do it.

  Thanks in advance.

  Lee

  LUNS was formatted as VMFS and created a data store? If not, it will not be displayed. You can search for available LUNS that can be used to create a VMFS with QueryAvailableDisksForVmfs volume

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How to establish the relationship between the tables contact and Global (entity) in Oracle Service Cloud to preconfigure data

  Hello

  We strive to integrate the OPA attributes to the Cloud Service Oracle tables to store session data for the customer portal users.

  We tried mapping the attributes of the OPA with relevant tables of cloud Service Oracle? Is there any installation of additional data to create to retrieve the session data for the particular user / contact?

  We managed to save tha data in arrays of cloud Service for users of ananymous and also well regarding customers portal users but to preconfigure data do we need to do any additional configuration / mapping to the contact table?

  Please help on the establishment of the relationship between the contact and Global (new table created in cloud Service) tables.

  Thank you

  Vivek

  Hi Vivek,

  To load data from the Contact in the the OPA policy template, you must configure the widget of the OPA. For instructions, see the following articles:

  - Incorporate an interview that uses data portals in Oracle Service Cloud Customer Portal

  - Deploy and configure the sample OPA widget

  - Insert the widget to sample in a customer portal page

  Obviously, you need to do the mapping in OPM as well, but even if the mapping is correct, you will not be able to load the Contact data unless the widget of the OPA is implemented.

  See you soon,.

  Jasmine

• What is the difference/relationship between a subject and a page?

  Hi all

  I'm not sure of the relationship between a topic and a new page: it seems that a subject can be made up of pages, but when I look at the HTML of the subject, there is no new section (DIV) for the addition of the page.

  Also, not sure about the relationship between the book and the pages/topics.

  You would be grateful if someone could either point of reference material or provide a few clarifying words on that.

  Thank you, Donna

  In regards to the benefits of the pages pointing to topics:

  Placeholders (table of contents Pages) allow a single topic to appear in several places in the table of contents. If the table of contents used directly the subject, each topic could appear only in one place. For example, maybe help is divided into sections, user and administrator, and administrators and regular users can add coordinates to a person in the application. Using a placeholder allows a single procedure to be created (as the task is the same for both users) and then referenced in the two sections of the table of contents.  If the subjects were used directly, two different subjects will have to be created. You can also organize your subjects in a folder structure that suits you and use a different structure in the table of contents.

  The placeholder allows also a display name different be used, for example, if you have a long topic name but want a shorter name to appear in the table of contents, or if the topic appears in several places in your table of contents and you want to focus slightly different in each place, say for different groups of users.

• Explain the relationship between libraries, albums and photos in pictures.  Where are the images stored?

  Looking for info on the relationship between libraries, albums and photos in the Photos app.  I can create several libraries containing photos and unique albums.  Can I put the same photo in libraries and the different albums?  By making a copy it creates a link to the original or a new photo?  Where are located the photo files?  When scanning photo to my Mac Pro files are placed in a folder structure, copy these photos in an album Photos using the original file or he places a copy in a database?

  Bottomline, I'm frustrated by the method of collection, the albums, the place and date.  I want store related photos in a separate album.   Example: A library for a family, containing albums of members of their family. Maybe the photos have duplicate in different albums.

  Some of your questions are answered by Leonie contributor in this thread:

  Re: Too many libraries...

  More answers can be found by using help in Photos app, or in general to help the Viewer.

  Apple Support website has links to information in articles; a search on the web is sometimes useful

  to locate the Apple pages faster than the company's site. Others in line include:

  Photos for OS X FAQ:

  http://www.IMore.com/photos-OS-x-FAQ

  How to use the Photos for OS x:

  http://www.IMore.com/how-use-photos-OS-x-ultimate-guide

  Good luck!

• Relationship between the samples through the second rate and sampling

  I was wondering if someone could clarify the relationship between the samples through second rate and sampling.

  I have USB6008 and USB6363 of the tips that I work with in Measurement Studio.

  For the nec USB6008 entry differential (up to four channels of HAVE), if I put a sampling frequency to 8192 samples per second, and I updated 2048 samples per channel with:

  Task.Timing.ConfigureSampleClock ("", 8192, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 2048)

  Am I right in assuming that:

  • through the 4 analog inputs 8192 samples will be collected every second
  • 2048 samples will be taken by way of analog input for each scan
  • The time between two successive data points is 1/2048 seconds (about 0.5 ms)

  Hi DKIMZEY,

  The help page for the "Timing.ConfigureSampleClock method" should have a hypertext link to the page "Sample clock" in NOR-DAQmx help, that contains this text: "this sample clock sets the interval of time between samples. Each tick of the clock starts the acquisition or the generation of one sample per channel. "When the sample clock frequency is 8192, then the time between two successive data for a single channel is 1/8192 seconds. The time between the data points on two adjacent channels is controlled by the clock to convert, which can be controlled independently on most devices (up to a point).

  Brad

• What is the difference between an application and a widget?

  I'm a newbie trying my Tablet cleaning. to start:

  What is the difference between an application and a widget?

  Widget-based applications

  not always asked of widgets

  Widget is just an application interface to develop android home and have some readily available settings/info/etc.; If you do not need to type an application to access some of the data; but you can type the widget to run the application if necessary and if possible.

  It's like a windows program, you must run it to use it... If they is not a widget.

• Relationship between the user and account in IOM DB

  Hello

  do you know how is set up the relationship between the user's record in the USR table and an account of application instance in the table form of process (as in UD_LDAP_USR)? I analyzed records from both tables, but failed to find the key to the relationship between the records in these tables.

  Peter

  The table Ouedraogo is the link between all the tables of an instance of a resource. The ORC_KEY is the process instance key that links the tables of UD_XXX. And there is also the USR_KEY which connects to the table user.

  -Kevin

• Table of IOM which shows the relationship between the request and approver

  Hello
  
  I have a few users who belong to the group "admin".
  
  Any request for a particular resource goes to this group for approval.
  
  I tried most of the tables in oim 11g r2 to find a relationship between the request and the approver group.
  
  The demand table has information about the request but no relationship with regard to the approver. Approver as a group, I need to know the status of name and the Group (pending, approved, rejected) request.
  
  Please could you all expert let me know the table I can find information on these...
  
  Thank you

  Search in the SOA tables

  WFTASK

• Relationship between a Tablespace and the BLOB type columns

  Hello
  When I import using cmd imp, all tables were imported except the table that has columns of type BLOB. After some pain in my head, I noticed that it was because of tablespace (I don't have the source table space in my destination).
  
  Can someone explain the reason for the relationship between the tables BLOB and tablespaces (because all other imported tables)?
  
  Oracle Version: 10.2.0

  Check this thread
  problem importing table with the blob data type
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:::P11_QUESTION_ID:378418239571}

• Strange problem casting between the DATE and time STAMP

  Hello world
  
  I'm faced with a problem of strange casting between the DATE and time STAMP. Strange, because this happens in SQL-Developer and the Testdatabase, but not when called from inside SQL-Plus, even if all Session settings are set to the top completely equal.
  
  I work on the Oracle 11 g Enterprise Edition Release 11.2.0.1.0 Windows database and run the following script, taken from SQL-Developer script output:
  
  < pre >
  create table ts_test)
  time/date stamp,
  stamp_copy timestamp)
  table TS_TEST standing.
  
  create or replace view vw_test as
  Select cast (date stamp) buffer,
  Cast (stamp_copy as date) stamp_copy
  of ts_test
  view VW_TEST standing.
  
  insert into ts_test
  Select systimestamp, the double null
  1 eingefugt Zeilen.
  
  Commit
  festgeschrieben.
  
  create or replace trigger trg_ts_test_iu
  instead of update on vw_test
  Start
  Update ts_test
  Set stamp_copy =: new.stamp_copy;
  end;
  RELAXATION trg_ts_test_iu kompiliert
  
  Update vw_test
  Set stamp_copy = stamp
  1 Zeilen written on.
  
  Select the stamp, stamp_copy, dump (stamp_copy)
  of ts_test
  STAMP STAMP_COPY DUMP (STAMP_COPY)
  -----------------------------------------------------------------------------------------------------------------
  30.05.2012 19:08:49, 218000000 30.05.3192 20:09:50, 000000000 Typ = 180 Len = 7: 131,192,5,30,21,10,51
  
  Select *.
  of nls_session_parameters
  VALUE OF THE PARAMETER
  ----------------------------------------------------------------------
  NLS_LANGUAGE GERMAN
  NLS_TERRITORY GERMANY
  NLS_CURRENCY €
  NLS_ISO_CURRENCY GERMANY
  NLS_NUMERIC_CHARACTERS.
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT exact hh24:mi:ss
  NLS_DATE_LANGUAGE GERMAN
  NLS_SORT GERMAN
  NLS_TIME_FORMAT HH24:MI:SSXFF
  NLS_TIMESTAMP_FORMAT JJ. MM YYYY HH24:MI:SSXFF
  NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
  NLS_TIMESTAMP_TZ_FORMAT JJ. MM YYYY HH24:MI:SSXFF TZR
  NLS_DUAL_CURRENCY €
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS TANK
  NLS_NCHAR_CONV_EXCP FAKE
  
  17 Zeilen offiziell
  
  Rollback
  Rollback abgeschlossen.
  < / pre >
  
  Look at the strange data that stamp_copy was after the update.
  
  When run from SQL over, everything is fine. But when I run this code in our application, the same phenomenon occurs. I've even seen a data dating back to the year 11907 (!), giving an exception by selecting from the table.
  
  Someone at - it an idea on how to work around this bug?
  
  Best regards
  
  Jürgen

  Did you check metalink for bugs?

  There are a few listed in this blog, that may be useful for you.

  http://hoopercharles.WordPress.com/2011/02/17/strange-timestamp-behavior/

• What is the relationship between the library of Photos and the iPhoto library?

  I'm asking this question here because I can't find all the relevant information online.

  I was dealing with imac a client recently who had a full boot drive. I noticed that his old iPhoto library used 126GB while she had already made the transition to the Photos. His photo library said that he was using a lot more (200 + if I remember correctly). I copied the iPhoto on an external drive library and deleted. Then, I opened the contents of the package and imported pictures remains in program pictures to make sure that I wasn't actually remove all of his memories. Once the work is finished, I was surprised to see that there are more than 6 GB of free space on his computer. What gives? Is there a relationship between the old iPhoto library and new photo library? If so, what is it? Is what I did without danger? I understand at the time that she will not be able to return to iPhoto. But what I'm missing?

  Thanks in advance for your comments.

  No - they are totally separate - connection or relationship of any kind is not

  or the other can be deleted without any effect on the other - but it won't save much space at all and is not recommended - which is exactly what you have seen- Photos saves disk space to share images with your iPhoto or Aperture - Apple Support libraries

  LN

• I keep getting "the trust relationship between this workstation and the primary domain failed" error windows 2008R2

  Hi all

  I appreciate your help. And I hope that this issue has been addressed previously, although I couldn't find any solution there.

  I manage a domain windows 2008 with 3 domain controllers. Recently my workstations continue to fall out of the field. I get "the trust relationship between this workstation and the primary domain failed" to many workstations.

  I know how to fix properly, use netdom.exe. But the mistakes keep coming back. I don't know where to look for the source of this error. A possible problem might be the time in any field is out of sync. But all my workstations synchronize with the domain controller with the primary domain controller role and seems to work correctly.

  Are there other sources, that I need to check? This is getting frustrating.

  Thank you much for the help.

  Sincerely,

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• What is the relationship between the source code (LKS) file and the process file (L4P)?

  I know that Lookout produces a file of source code with an LKS extension when you save a file to process.  Can someone explain the relationship between the two files, especially while the (L4P) process is running?

  1. Is this just a backup file can be recompiled in a process file?
  2. A file corrupt LKS cause strange problems with operation process file?

  I currently have a very strange intermittent behavior with a process file run.  I first thought that the problem was associated with my Fieldpoint and/or their configuration modules.  Since then, I found that my process file has a file corrupt LKS.  I repaired and recompiled my LKS file to a new file to process.  I still don't know if I have solved the problem or not.  So, the problem is intermittent, I did that about 20-30 SECONDS to resolve the problems there before he goes.  Then he can not show up again for another 2-3 days.

  The .lks file is just the source code of your process. It can be opened by a different version of lookout, but does not have the .l4p file.

  The .lks file is not be used while a process is running. Lookout does not read the file more after his execution. So it should not affect the running process.

  What kind of problem, is it?

• the trust relationship between this machine and the primary domain failed

  Hi I have a virtual server (Server 03) with a vista machine, I can log on to the vista computer, but it happens with the trust relationship between this machine and primary domain failed. I tried to delete the domain vista machine, but he says you need to keep a main area

  Any suggestions gratefully received

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

  Hi João,.

  To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

  Click the Microsoft KB Article below for troubleshooting steps.

  The trust relationship between this workstation and the primary domain failed

  Let us know how it goes.

  Thank you