Relative function in EN reports

Similar Questions

• BSOD network, related function for Winsock problem driver-related

  I'll give as much detail as possible in order to get the right answer.

  I'm working on HP G70 - 463CL with Vista Home Premium 64 - bit.

  The problem is that whenever we try to use something that would require a network function, I have a BSOD with the IRQL_NOT_LESS_OR_EQUAL.
  This occurs even if I plug in a network cable, try to run a web browser, or right-click on the signal wireless in the bottom task bar.

  When the computer reboots, I get the "Windows has recovered from an unexpected shutdown' with this information.
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  LocaleID: 1033

  More information about the problem:
  BCCode: a
  BCP1: 0000000000000000
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF80002228C45
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  He then lists the minidump file which I do not know how to open it.

  I went to HP and download the current network for the WLAN and LAN drivers. (I have uninstall the previous)

  I went to Services to see what didn't work and I got these errors when I tried to start them.

  The DHCP Client 1.) -Error 1068: the dependency service or group could start. So I clicked on the dependencies and seen that it relies on the "accessory function for Winsock driver" and the "WinHTTP Web Proxy Auto - Discovery Service" depends on DHCP.

  TCP/IP NetBIOS Helper 2 properties.) -a had the same message according to the 'related function pilot' and it depends on the NETBT.

  I have passed to the command window and tried ping 192.168.1.1, and got the error that transmit failed, error code 1231.

  I have also reset IP address and with the command netsh winsock

  I went to Device Manager and click on devices show hidden.

  Under the pilot no Plug and Play there was a yellow by 'Related function for Winsock driver' symbol when I click Properties, it says under the status it is not working properly or has not all the drivers installed (Code 24).
  I also had a yellow symbol of security processor Loader driver and the same information under properties.

  In searching the Internet, I tried several different things that I found and tried including change something in the registry.  At one point I was able to make wireless work and managed to get on the internet and ran Windows Update and downloaded several items.  After the reboot, I clicked on an Internet Explorer icon on the screen to come back on the internet and I got the blue screen again.

  I ran Malwarebytes and it found nothing.

  I uninstalled AVG 8.5 and was going to install a different virus protection and I have a feeling that this is where the problem started.

  So if anyone can offer help, I'd appreciate it.  I have a feeling that everything hinges on the related function driver but do not know how to reinstall.  The hard drive has a recovery partition, but I don't want to reinstall the OS.

  There are a few issues, including the duplicate property and lack of records relating to the CPU.

  While this can be traced back to file by file, the best way to solve the OS when SFC finds files that it cannot solve is to do a repair of the DVD of the OS installation.

• 'creation' content related. Link a report to another

  If I want to create related content between 2 reports how the report appear so that I can choose it as an object of related content?

  For financial information: related content can be specified on any cell in a grid (cells of data, the text cells, formulas, cells, header cells), text object or chart object.

  Brief; Open the report you want to create a link

  Select the cell, and then in the view pane (right side), check the "Add Related Content" box, and then click the Setup button and navigate to the report that you want to link.

  More details can be found in the official documentation:
  Financial Studio Reporting user guide: http://docs.oracle.com/cd/E17236_01/nav/portal_4.htm

  I hope this helps.

  Cheers, Iain

• Resignation LabVIEW function generates crash report in executable

  Hello

  I use the labVIEW Quit to close an app when the VI is built into the executable. If LabVIEW is used, the application just stops and leaves the window opens. When the function quit LabVIEW is used in an file executable application is closed down.

  In the current application I am developing (Windows 7 - LV2014SP1) I've isolated the function exit LabVIEW as the source of the Crash report I get after I have quit the application. I have inpsected the accident report, and there was a thread that does not have adequate access. So I ran the same executable with administrator privileges and the error disappeared. It seems that the app I'm developing does not sufficient privileges to close and it generates the Crash report.

  I used the function exit LabVIEW for many applications in the past without problem. I have not confirmed yet if the problem is specific to the current application I'm developing or LV2014SP!.

  Thanks for any help to solve this problem,

  -Troy

  TroyR wrote:

  Wasn't there previously some issue with the help of Invoke node executable?

  Not that I know of.  But here's my tip to close an application.  I put the FrontPanel Close within a conditional diagram disable method.  The invoke node only goes in the execution engine == true cases.  In this way, the façade is not closed if you are in the development environment.

• How to add the delete function to a report that is already created?

  Hey, guys:
  
  I'm not familiar with the form relative to the APEX. I have a lot of forms with the reports that has been created before, but they only create buttons. Now I need to add, edit and delete buttons. I wish I didn't have to recreate forms with reports. But when I tried to add the Remove feature by comparing a form with button Delete created by APEX, but it does not work. remove the button does not respond.
  
  parameter is as follows:
  
  style button: button model based
  model of button: button
  button type: normal
  
  Action: redirecting to a URL
  Run validation: No.
  Target URL: javascript:apex.confirm (htmldb_delete_message, 'DELETE');
  action of databases: SQL delete action
  
  condition type: point value / column in expression1 is not null
  expression1: P2172_ALIAS_ID
  
  I also activate the deletion in process: "SOR_ALIAS line process. '
  
  
  If I set the action of the button delete that submit the page, I can delete the line, but no standard popup alerts, could someone help me on this?
  
  Thank you.
  
  Sam

  Hello

  When you try to reproduce your problem, since all you posted was going well for me, I came across an error that htmldb_delete_message was not defined (you could check your browser console, usually by pressing F12 and select the console tab to see what happends when you press the button).
  Perhaps this is also the case in your configuration, simply replace the URL target with the text below to see if that's the problem.

  JavaScript:apex.confirm ("are you sure you want to delete this record?","REMOVE" ');

  Concerning
  Bottom

• You want to know the functional things in reports

  Hi all
  
  Greetings of the day!
  
  I just want to know what the reports below are functionally making...
  
  1 State balance creditor
  2 State balance debit
  
  Waiting for your quick response.
  
  Thank you
  Atul...

  You're probably better to ask on the Forum Financials @ Financials

• High functionality of dynamic report page

  Hi all
  
  I need to create a dynamic of ask the top N feature n the selection function, it shows the effect on the report as for dynamic top10 of value should only show the top 10 values in report how to do this? Please help...

  Jingle.

  Reference: http://oraclebizint.wordpress.com/2008/02/21/oracle-bi-ee-101332-presentation-variables-in-top-filter/

  Thank you
  Saichand.v

• Link to related content of financial reports

  Hello
  I have developed a few reports financial information using 9.3.1 version.
  I used the related content feature in order to get a link in one report to the other.
  The problem is that the new report linked to related content opens in a new respect for different window of the source report.
  I need to open the new report not in a new window, but in a new framework (just a new tab in the worspace env.)
  I want to get the same effect I have when I run a report in the EPS of the workspace. without opening another window.
  
  An idea whose settings or setting must be managed in order to achieve this behavior?
  
  Thanks in advance.
  
  Kind regards
  
  Stefano

  replace
  http://reporting.UK.foo.com:19000 / workspace
  by
  a single period (.)

  Then, it will open in a different tab of the workspace even.

  Thank you and best regards,
  Rahul

• Can I have two emails related to the weekly report

  Is it possible to link two e-mail accounts on weekly activity? I gave my old computer to my sister for her children and I am their reports, which is fine but also want their mother to get a report as well. Are also nephew use it every once in a while so I would like to see the reports on its behalf.

  This is not immediately (great thing to put in a feature request), but a simple solution is to set up a rule in your email to automatically forward your emails to your sister.

  How to do this depends on your e-mail, but for example on Outlook.com service (Hotmail/Live too) right click and choose "Create rule" and then simply confirm you want the automatic transfer of mail from this sender in particular (sender of the family activity) sister.

  I've heard some people even send it to their children so that children know what is observed :)

• ColdFusion Report Builder functions displaying not good performance

  I have difficulties to report functions work. Looking at the documentation, I followed the steps to the creation of a function (that seems to be a feature of ColdFusion) and inserted in the report. The purpose of the function is to display an address from the address fields in a database table. Some records may only need 2 lines of addresses to display other 3 or 4 depending on the address. I thought that the function would determine whom is line 2 or 3 was not null/empty, display it. If it's empty/null, do not display their as well as address 1 and 4 line. Even if I get no error when the report is displayed, the function doesn't seem to evaluate it... just displays a cryptic "placeholder" where the output of the function is supposed to be consisting of a combination of letters, numbers, and symbols (e.g., cffReportName@1233443554455$funcREPORTNAME@hghkl455). I tried to create another simple function right off a static variable as a test, but it does the same thing. Any ideas?
  

  Yes! I finally thought to it and that's a no-no on my part... When insertion of the function in the report you have to name it as follows:

  Report.FunctionName)

  I tried to do it like this:

  Report.FunctionName

  Becaue I left it turned off the bracket would not evaluate the function. Thanks anyway!

• Text in report function

  Hello
  
  I'm trying to insert a function in a report header, and I give the following command:
  
  < < VariableValue ("Grid1", & CurMonth) > >
  
  I guess I have not able to correct the syntax
  
  There is no text function error I get when I run the report nor is it come with any value.
  
  I have error TEXT feature enabled on my report.
  
  Any help would be appreciated
  
  Published by: user4958421 on July 29, 2009 13:18

  Here you go - http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/Becket01.html

  I'm sorry Jake, you should 'Correct' for this one.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Possible values range Setup for essbase for reports substitution variables

  Hi all
  
  I tried to define a substitution variable that holds the current month and the previous in current year called curryrmnths. For example, the current month is March, the value of the variable must be Jan, Feb, Mar.
  
  I am trying to use this variable for reports in order to make dynamic reports, instead of manually enetering the new month each time. (We use the reports financial hyperion).
  
  I tried different syntaxes like,
  
  Jan: Mar
  Jan, Feb, Mar
  "Jan, Feb, Mar.
  
  But none seems not to work, they arise while setting in the reports.
  
  Can anyone suggest a solution? How a range of values is dynamically adjustable in a report?
  
  Your answers would be appreciated.
  
  Thank you.

  Take a look at these discussions - your condition has been discussed quite a bit more in the forum of queries and reports:
  Re: Very Urgent report EN
  Hyperion Financial Reporting v 11 - Relative function (in another dimension)
  Re: Roll month HFR - really Urgent

  Kind regards

  Cameron Lackpour

• Helps to create a financial report with Studio of Reporting.

  Hello
  IM new to the Financial Reporting Studio so my question is maybe something very simple, for beginners.
  Im trying to create a report that has two columns in each column, there is the dimension of the year. In the first column, there are the current POS for the year, but in the second column, I would like to first year unfounded POV automatically, without using a command prompt. Y at - it a function or a way to do it?
  Tanks yuour foy help!
  Edu

  Use the relative function.

  The first column will be set to use the POV of the user.

  For the second column... see the tab named 'Functions' Select the function "RelativeMember". To the member row - select user POV. For offset, enter-1... that automatically selects the previous year.

• Firefox 6.0 crashes immediately submitted crash 33 reports, no info found on 6.0 forum or anyone to talk about it. Restored 5.0 and I'm able to run properly. Help, please!

  Firefox does not appear... immediately hangs at startup. When I am able to restore, go to about: crashes, said my reports are not. More and more frustrated and don't know what to do.

  bp-ac64ab02-d672-43e0-aead-f1a5521108198/19/20117:11 AM
  bp-78e8fc15-0c20-43f3-a84e-7566b21108198/19/20117:11 AM
  bp-f6180acd-39b6-4b00-8565-d75e721108198/19/20117:10 AM
  bp-b6baa533-e0f0-4116-85e2-edc7921108198/19/20117:10 AM
  bp-c28edb9c-2d00-4ca8-bc4f-38a5e21108198/19/20117:10 AM
  bp-e43f2564-45f2-46f1-b062-22f0921108198/19/20117:10 AM
  bp-7ba0fe19-3289-4d34-b94d-fe32921108198/19/20117:10 AM
  bp-2ba6fcee-df35-49bf-a337-44e8121108198/19/20117:10 AM
  bp-dd88b98d-3bab-42a6-9d34-4163321108198/19/20117:09 AM
  bp-719b42f3-fe50-4fa0-90a7-3427b21108198/19/20116:54 AM
  bp-24ffa8c6-1b54-41a8-8ab4-5505321108198/19/20116:52 AM
  bp-cf633f05-573c-4f48-8bb0-61c4521108188/18/20118:22 AM
  bp-40e43ca6-54d3-40fa-9c56-8196221108188/18/20118:22 AM
  bp-0bca0fa7-baa1-4ed5-bf6d-68bc221108178/17/20114:42 PM
  bp-a58c1e8e-f00b-47dc-b859-78e3b21108178/17/20114:31 PM
  bp-7c426c8b-1ebb-4acc-94c4-a131c21108178/17/20114:29 PM
  bp-74ede816-77a0-4523-bb31-556e521108178/17/20114:29 PM
  bp-33e02269-0e16-4df6-9569-2953421108178/17/20114:27 PM
  bp-bd8df7cd-9e01-4b25-8adb-8d3e321108178/17/20114:07 PM
  bp-2dc569bd-5960-4776-9ae2-8601221108178/17/20114:07 PM
  bp-da2b6443-f932-4a28-9ca7-1e8d921108178/17/20114:05 PM
  bp-88cc5ce1-36f8-423f-89e0-7a6fa21108178/17/20114:00 PM
  bp-70da7cf3-e6c6-47a2-aa45-86a7821108178/17/20114:00 PM
  bp-74a15dfc-b2b0-478c-8a88-5d55021108178/17/20113:27 PM
  bp-0f653fbd-9cf1-4de0-a415-6dd2b21108178/17/20113:27 PM
  bp-90a8412e-94e5-4f42-8c4c-839ae21108178/17/20113:26 PM
  bp-e3a14c17-dafd-409e-9902-700dc21108178/17/20113:26 PM
  bp-3d71c103-cb88-45fe-a418-3a43d21108178/17/20113:26

  The person who filed the Bug 680418 (which is listed as a bug related to your crash report) just posted this comment on the bug report yesterday:
  After a little work, the people of spywareinfoforum.com have been able to help. ( http://www.spywareinfoforum.com/index.php?/topic/132436-malware-effecting-firefox-v6-cant-start-even-in-safe-mode/ )
  
  ... well, you can try to visit this forum to see if they can help you, too.

• How can I change the name of the .png file saved when I create a HTML report?

  I have a report generation .vi that reads in several graphics and adds the 'photo' in the .html report. Is it possible to control how LabVIEW named the graphics .png resulting?

  I' worm attached a photo of the small piece of code and the generated automatically.

  Thank you!

  Hello

  The naming convention is designed to ensure that no conflict is generated that this generation of report class is called. Below, I've attached a screenshot of the feature that defines the names of the images.

  

  You can view this block diagram by double-clicking on and by opening the reporting tools. While you are free to modify this class to implement a new naming scheme, I have to insert the disclaimer that this process has bad effect on additional functions in the report generation tool. As you can see in this code, the names are randomly generated, then applied according to a random number. You might look into the implementation of a system that gets the label of the reference of the input control control and generates the path suitable for PNG images.

  I really appreciate your time. Please post any additional questions.

  Sincerely,