ColdFusion Report Builder functions displaying not good performance
I have difficulties to report functions work. Looking at the documentation, I followed the steps to the creation of a function (that seems to be a feature of ColdFusion) and inserted in the report. The purpose of the function is to display an address from the address fields in a database table. Some records may only need 2 lines of addresses to display other 3 or 4 depending on the address. I thought that the function would determine whom is line 2 or 3 was not null/empty, display it. If it's empty/null, do not display their as well as address 1 and 4 line. Even if I get no error when the report is displayed, the function doesn't seem to evaluate it... just displays a cryptic "placeholder" where the output of the function is supposed to be consisting of a combination of letters, numbers, and symbols (e.g., cffReportName@1233443554455$funcREPORTNAME@hghkl455). I tried to create another simple function right off a static variable as a test, but it does the same thing. Any ideas?Yes! I finally thought to it and that's a no-no on my part... When insertion of the function in the report you have to name it as follows:
Report.FunctionName)
I tried to do it like this:
Report.FunctionName
Becaue I left it turned off the bracket would not evaluate the function. Thanks anyway!
Tags: ColdFusion
Similar Questions
-
Reduced to adjust text - ColdFusion Report Builder
In ColdFusion Report Builder, is there a way to reduce the text to fit a particular sector? (as opposed to the stretch with overflow)
Any help would be greatly appreciated!
-Chris
I found another solution that works relatively well. I have added several fields to a field on the report with each of these areas on the report by using a different font size. For each of these areas, I applied printing conditions to evaluate the text as an image width (in pixels). Based on the width of the image, the correct field with the font size is used, and all the text is in a specific area. The result is the desired effect.
For example, if the width of the text as an image is 383,73 pixels, the printing condition where the font size is 26 is used.
Width of the text in Pixels Greater than or equal to Less than or equal to Font size 0.00 374.99 28 375.00 399.99 26 400.00 429.99 24 430.00 469,99 22 470.00 509.99 20 510.00 579.99 18 -
Report Builder 6i do not recognize the analytical functions
Hi all, in an attempt to speed up a slow query, I applied the analytical function to it. I can save the query in the generator without any problem, however, I can't create data between this request and other links. After I have comment on the analytical function, data bindings can be made. My colleague says Report Builder 6i is too old so he can recognize only the ANSI SQL syntax. Since our server DB uses Oracle 10 g 2, is there a way for the generator of reports to identify and compile syntax of Oracle 10 g?
Thank you very much.Hello
Your colleague is right. Even if the SQL query is executed by the DB server, reports must analyze the SQL query.
The SQL parser included in reports 6i-based 8.0.6
You can see this version using the report designer:
Menu: Help-> on Report Builder...
ORACLE Server Release 8.0.6.0.0
Concerning
-
CF Report Builder field do not stretch with overflow
I use CF Report Builder Version 144677 on CF 7.0.2 and have a large SQL Server text field that needs to stretch. If I stretch the height of page layout for the field to a higher value, it works, but then of course I get a bunch of whitespace if the value of the field is smaller. I tried a variety of property settings and moved the field in the report header, the detail and the foot of the sections, but were unsuccessful. Guess "Stretch with overflow" layout of the property set to True should have done, but it's not. I have modified the properties of layout and treatment thus including the definition of type of post float and fixed, but nothing is. I also tried different conversions on the field type itself to see if it didn't matter, once again, no help. As a side note, I am able to do subreports to stretch. Suggestions would be appreciated.
He also noted, is not much help with the help system. Embedded help does nothing.Another developer on my team sent me a report that worked and I noticed that I had put the print order horizontally when I was trying to solve another problem. Changed back to vertical and it works very well. Not sure why it was important, but it works.
-
Use subreports in ColdFusion Report Builder 10
lets say I use the first report to create a cover page, and now I want the query designer a subreport.
This section manages the next report... is - not correct?
Now you're talking about the requirements of the application, but you have not explained how you want to use multiple queries in a single report. I suspect that it is not what you actually need.
Essentially, each report has only one query. For a parent/child relationship (think of the master-detail paradigm) you use subreports. A subreport is a report full fledged, but its purpose is to be incorporated in another State. The sub-rapport query is usually limited by the values passed to it the report parent using report parameters.
See using subreports in the documentation for more details.
See you soon
Eddie
-
Firefox crashes repeatedly with crash reporter. Reinstall is not good - same problem
Everything worked "fine" years. Then he crashed and will not start now. A perfectly clean reinstall (all washed it first) gives the same problem: crash report appears whenever I start.
Crash ID: bp-15f22109-1638-4bb6-a673-23f942150928
Cannot add troubleshooting information because the inx file seem linked to Firefox and it does not work.
FF does not start in safe mode - same problem.
Hi, looking at the report, it seems that this may be caused by external software on the computer. go to your control panel and remove all software labled "Freecorder" or similar, or by the Publisher "Applian Technologies" or any other toolbars.
-
Sum function is not displayed total
Hello
I have to calculate the sum in the report. When I use the sum function is not the total addition display. Please let me know. How to calculate sum?
Thank you
LaxHello
In your model if there is no group logic can simply give the syntax below.
(Cloumn_name must be your xml of the column name)If you're using any function group
Thank you
Ananth v -
Windows 7 reports that it is not authentic, after over 2 years of functioning
Seems to be a lot of that. Desktop Gateway bought from Future Shop, more than two years, has recently popped up a notice of MS Windows is not genuine. It was preinstalled on my system so very well when I first set up the machine. Office is also authentic, I installed from DVD.
Thanks for your help.
Will beI ran the Diagnostic MGA tool. Here is the log:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Code of Validation caching online: 0x0
Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
Windows product ID: 00359-OEM-8992687-00006
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {36E5D1CA-AD24-4F32-BAF1-B7086FEFA3EF} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.120830 - 0333
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\IEXPLORE.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{36E5D1CA-AD24-4F32-BAF1-B7086FEFA3EF} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-7QJB7 S-1-5-21-252740521-809367039-4249978250 00359-OEM-8992687-00006 2 Gateway DX4840 American Megatrends Inc.. P01-A3 20100517000000.000000 + 00096C73A07018400FC 1009 0409 Time(GMT-05:00) Standard is 0 3 ACRSYS ACRPRDCT 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800006-02-1033-7600.0000-1592010
Installation ID: 008290893990959332430714479236944172365470919995559966
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 7QJB7
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2013 23:44:08Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 1:25:2013 23:27
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current Hash HWID: LgAAAAEAAQABAAEAAAACAAAAAgABAAEA6GHKBag3ioUgvYJhYj3aNOpMbkdcXQ ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC ACRSYS APIC1139
FACP ACRSYS FACP1139
HPET ACRSYS OEMHPET
MCFG ACRSYS OEMMCFG
SLIC ACRSYS ACRPRDCT
LASRYVITRAGE ACRSYS OEMB1139
ASF! LEGEND I865PASF
AWMI ACRSYS OEMB1139
SSDT DpgPmm CpuPmWell, that solves 80% of them. This usually fixes the others:
Please run the
following commands at a command prompt
NET STOP CRYPTSVC
CAT2OLD REN C:\WINDOWS\SYSTEM32\CATROOT2
NET START CRYPTSVC
Once finished, leave the system alone for at least an hour rebuild
the database, then restart, and run another report MGADiag.
Note that this will delete your update history - but all updates will remain
installed and can be found in the updates installed at registration.
-
Report Builder is not not as forms of fusion middleware &; installation reports
Dear all,
I installed oracle fusion middleware forms & services ofm_frmrpts_win_11.1.2.1.0_64_disk1_1of1 report.
generator of form is there, but the Report Builder is not there? Why? where is the generator of reports?
Kind regards.Hi Maahjoor,
Try from Report Builder using the rwbuilder.bat in the directory % ORACLE_INSTANCE%\config\reports\bin\.
If you still have questions to
(a) save the file rwbuilder.bat to %ORACLE_INSTANCE%\config\reports\bin\
(b) now change file rwbuilder.bat the file % ORACLE_HOME%\bin\rwbuilder.bat, by manually hard code the correct paths for:$$Instance.directory$$\config\reports\bin\reports.bat
$$Instance.oracle_home$$\bin\rwbuilder.exeIn other words, if your instance is C:\Oracle\Middleware\as_inst1, then change the rwbuilder.bat to take into account:
C:\Oracle\Middleware\as_inst1\config\reports\bin\reports.bat
C:\Oracle\Middleware\as_inst1\bin\rwbuilder.exe(c) and then re-run the file updated the rwbuilder.bat to the % ORACLE_INSTANCE%\config\reports\bin\.
If it still does not work...
Follow these metalink 2 ID, they will be useful* REP-50125 "rwbuilder.conf:java.lang.NullPointerException" try to Open Report Builder [Article ID 1532120.1] *.
* 11g on MS Windows error generator with: REP-50125 [Article ID 1059638.1] *.
Concerning
Fabian -
Report Builder 10 g does not start on Windows 7 (still reduced)
When I run the creator of report 10g in my Windows 7 computer, the splash screen appears for a while and then it reduces in the taskbar. Thinking that he loaded and gone to the taskbar, if I click on the icon on the taskbar, it displays a different splash screen, load another copy of Report Builder, which also decreased in the same icon.
There is no maximize button on right click on the icon. I tried to run as an administrator and also to correct the compatibility, but nothing has worked.
This problem starts only after a few days of the installation of the developer 10g. It worked well for a few days and then he began to behave like that. Seen this twice now, both times on the re-installation of the developer then the problem disappears.
Is it possible to solve this problem other than re - install the Oracle Developer?Hello
Have you tried to connect to the database before opening the RDF file?
Concerning
-
Display the Browse on Firefox is not good
I am using a navigation button in my HTML, workng is fine, but on firefox-30 view of my button browse is not good, can someone help me to fix it in my code?
Is it possible that this field is 'necessary' and what is called by a rule for admission: required in your CSS? This is not new in Firefox 30, but perhaps it was twisted (there are hundreds of variations in each version...). Otherwise, it is hard to imagine why you'd have a ring after using the control and not before.
-
Report Builder 1.0 will not connect to the data source for Reporting SERVICES
We have a few users who are unable to connect to SSRS on SQL Server 2008 using the Report Builder version 1.0
(We will be updating soon, but it's a slow process, and now users have questions)
Instead of disputed for their IDs, they are requested to select a data source. This information is supposed to be filled automatically when the user starts the Reporting SERVICES report designer.
Does anyone know where/how SSRS communicates information to start the application with one click Report Builder, and where, if anywhere, it stores?
Hello
The following forum seems most appropriate for your question:
https://social.msdn.Microsoft.com/forums/en-us/home?Forum=sqlreportingservices
You can get a faster response there.
I hope this helps.
Kind regards
Alberto Morillo
SQLCoffee.com -
Original title: c#
I am using visual studio 2010... but when I use commands like ToInt, den ToDouble etc, it shows an error indicating that these functions are not in the frame... Please give a solution... Thank you
This issue is beyond the scope of this site and must be placed on Technet or MSDN
-
Oracle 12 c not not opening Report Builder
Hi all
I'm installing Oracle 12 c forms and reports.
For me report generator does not open. It throws error as ca.dll not found.
and I started the report server using startManagedWeblogic WLS_REPORTS
when checking the url http://localhost:9002 / reports/rwservlet/showjobs ?
It shows error like REP-52266: the current report server
How to solve these problems?
Thank you
Su.GI
I think that you should start the rwbuilder.bat not find files exe for rwbuilder.bat file and double click it it will start the generator of reports for you.
After you have started all the below
startNodemanager,
startWeblogic,
startManagedWeblogic WLS_FORMS,
startManagedWeblogic WLS_REPORTS
Step forward
Example of
1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin
2 - connect on AdminServer.
Connect ("WebLogic", "weblogic_password", "hostname:7001")
3 run the following command from wlst.
createReportsToolsInstance (instanceName = 'reptools1', 'AdminServerMachine' = machine)
B. create the stand-alone reporting server
Example of
1 - run wlst.cmd/wlst.sh ORACLE_HOME/oracle_common/common/bin
2. connect to the AdminServer.
Connect ("WebLogic", "weblogic_password", "hostname:7001")
3 run the following command from WLST.
createReportsServerInstance (instanceName = 'rep_server1', 'AdminServerMachine' = machine)
This will create a new independent Reports Server named "rep_server1".
4 - launch the report server.
Note: The examples use ports and the default credentials.
C. start / stop the stand-alone reporting server
Go to the DOMAIN_HOME/bin folder and issue the following commands:
startComponent.cmd or startComponent.sh [name of report server]
or
stopComponent.cmd or stopComponent.sh [name of report server]
Then follow my approach I gave above.
I think your problem will be solved.
-
Listagg function displays the keyword not found error message
is version of Oracle 11 g
can you please suggest me to find exactly the problemcreate or replace function fn_months_attended return number is v_array varchar2(1000); begin select LISTAGG(c.act_id,',') within group (order by c.act_id desc) INTO V_ARRAY from programmes a,campaigns b,activities c where a.pro_id=b.cam_pro_id and b.cam_id=c.act_act_id order by act_id DESC ; return v_array; end; Error i received Error(6,3): PL/SQL: SQL Statement ignored Error(6,39): PL/SQL: ORA-00923: FROM keyword not found where expected
Hello
In the LIST of 11 GR 1 tot material. function does not work. It works in only 11 GR 2.
Kind regards
Champion.
Maybe you are looking for
-
Firefox homepage button opens new window instead of a new tab
When I hit the button on home page on the Firefox toolbar, it now opens a whole new window instead of a new tab. He used to work until I upgraded to Firefox 9. Any suggestions on how to fix this?
-
HP Pavilion p6631p Windows 7 I have a slightly new wireless router and the PC is always connected like this, but in the last days he will not pick up any signal from my router or our hot spots of our my touch 4g cell phone. It will not work so hard c
-
Error-2147312566: Excel 2013, LV2015
Hello world I know that this subject has been discussed long ago. I tried the solution, but it did not work, and I have no idea how to proceed. My Testsystem has: -LabVIEW 2015 SP1 + Report Generation Toolkit -Office 2010 My PC has: -LabVIEW 2015 SP1
-
15 - p030nr: keyboard key removal HP 15-p030nr
Good evening everybody, I recently received my HP 15-p030nr as a gift for my birthday. A few days ago on my keyboard, the "S" key began to stick when you click on (Let's click on down and pop back up one second after, it was selected). At first, I th
-
Unable to save the name of file in Notepad with * (asterisk)
We are unable to save the name of file in Notepad with * (asterisk)... with this offer special symbol... why?