Releases of question on 2 separate, one for Playbook and the other for BB10
Hello
At the moment we have an application that is currently enabled for BB10 and Playbook. However, we've recently re-written the application take over much better phone interface, and we would like to submit a version that is not specific to BB10 and have a separate for Playbook version.
What I hope we can do is just uncheck the BB10 of the current version and let the Playbook checked, then submit a new version with only selected BB10. However, I wasn't sure if this overwrite the version of the Playbook and pull it store since the release "more recent" doesn't have the verified Playbook. Is it possible to have these 2 releases by-side, but be in the same "application"?
Thank you
Jake
It works as you expect it. In fact you don't have to uncheck the BB10 phones on the old version.
Tags: BlackBerry Developers
Similar Questions
-
My office is half divided. One opaque side and the other clear help
My Mac Mini desktop computer has suddenly split into two halves. One opaque side and the other clear help as if half of the screen is selected
I just realized that control of the mission, the launching ramp and dashboard do not work (I can't call them upward)
-
two hard drives, one with vista and the other with XP and you want to remove second disk XP
I have a hard drive that came with my computer and vista on it, I added a second drive to my bench that has XP on it. I want to remove the second XP disc and simply use it as a storage drive, and I'm afraid that if I try and uninstall XP disc, it allows to uninstall vista of the first hard drive instead. or should I even try and uninstall it all and just delete all files? Since there is nothing in the registry for all the things on the second disc. If I uninstall XP second drive will be there remove all of that second drive? because there are a few things about this, I still want to keep. I should also mention that it is divided into three separate letters, if I do not uninstall XP I lose all three of these letters of partitioned drive? Any help on this would be greatly appreciated.
Thank you.
You can just uninstall XP. Anyway, as you say, you can remove the folder Program Files and Windows in that partition but personally I would just copy the files I need to another partition (on the hard drive where vista is installed) and the format of the old HDD.
-
Hello
I installed 6 Lightroom on both computers. On one I have Lightroom 6.0 and the other Lightroom 6.3 (same license is valid for two machines). Comment do pay have Lightroom 6.3 on both.
Thank you
Try to completely uninstall LR and then install 6.0 and then 6.3 update.
Download here: https://helpx.adobe.com/lightroom/kb/lightroom-downloads.html
-
I need to reinstall my CS6 on my PC. I installed it on this computer for 2 years now, but anyway half of subsequently moved to one of my hard drives and the other half is on the other. I'm sure to remove both drives and reinstall on the larger hard drive? I am a student and single MOM, and I can't afford the monthly subscription for the CC7. If it does not somehow, I'll miss my classes.
If the largest is the primary drive then it is safer than any other installation option, but all uninstall/reinstall can present problems. If the software currently works very well, I would say that leave well enough alone if your future depends on software work. Before you delete anything, remember to disable by opening an application and by choosing Help-> Deactivate.
-
We were members of creative cloud and when the membership was to be renewed, we asked one month free. This leads to 2 accounts creative cloud on our page... a renewed and paid for and the other related to the temporary use. How get rid of the temporary use of a month? They both have the same ID and both appear on the administration page. Thank you.
Please contact customer service to get this resolved.
-
How to create a delay between the start of the signal simulated one and the other?
Hello
As a first step, I am relatively new to Labview.
I am trying to use Labview for 2 different output square waves (different frequencies, amplitudes, etc.). I've implemented 2 signals to simulate different and do them in a While loop, however, when I start the program, I need a square to begin signal immediately and the other to start square waves 2 seconds later. Any help would be greatly appreciated.
Thank you!
A few questions.
Are these frequencies of associated signals? If so, were they to be "in phase"? As from one simulation after another, put one start later in a case statement, pass a county of timer to establish the initial start time through the loop, subtract the value of the other in the loop, when the difference is => in 2 seconds, set a real flag and have the second simulation in the real of the structure of the business case.
Typed too slowly again!
-
I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.
Any ideas?
On Fri, September 19, 2014 12:28:56 + 0000, SamJ008 wrote:> I have 3 computers running Windows 7 Professional, one of them has a four installed tuner DVB - s2 card. I want to configure it as a server and the other two as clients, each using two of the tuners of the card. I understand the media library is able to use the basic network TV tuning cards, so there must be some way for me to configure the server to send the information over the network.>>>>>>> Any ideasStart reading hereYou will not be able to use your existing tuners like tuner network. Microsoft hasarrested development of Media Center, so don't expect any new hardware/software toappear.__________________________________________________________________________________________________BarbMVP Windows Entertainment and connected homeMy Blog - http://digitalmediaphile.com/Please mark as answer if that answers your question -
We have two identities/addresses. Mine has like 9 folders (Inbox, sent, trash, all mail, spam, important, Star) and the other 3 just (Inbox, sent, trash). We had a guy put this email (Thunderbird) in the computer client. There is no do. So, why this difference? One of these important extras (sorry), or others Miss?
Well, yours is a gmail IMAP account. (All mail is a give) the other account is probably a pop account to your Internet service provider. That is why only a couple of the local folders.
See here for some basic details about IMAP and pop https://support.mozilla.org/en-US/KB/glossary-Terms-including-types-Accounts#w_mail-Accounts
-
Just installed Firefox 9.0.1. When you open a new browser session, two tabs will open. One is my home page, and the other is a home page of Firefox. I want to just my home page to open. How do I get there? Thank you.
See the following for a few suggestions:
- https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
- https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
- http://KB.mozillazine.org/Preferences_not_saved
-
Dear all,
I'd appreciate if someone help me.
I want to read two files, one is the temperature that updates every second, and the other is energy hysteresis that has specific lines and is constant.
I had a program in the discussion forum to read a file as it is updated. I checked this program in my case and it works.
Then I added playback file hysteresis energy to the existing file. But while I run the program, the energy hysteresis file is read with all the lines.
But the goal is that every time the updates of the temperature, I need to read a line of the file hysteresis energy.
in this way every second, so, I have a new temperature data and a row of the other file.
I tried to use 'for loop' inside the program, but it did not work, because the temperature reading will stop until that end of the loop.
I joined the program.
Could someone help me how read only a row of hysteresis energy file every time that the temperature updated?
IS that what you wanted to achieve?
-
On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.
Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must
a network must be disabled. Is it possible to run simultaneously?
original title: served various networks simultaneously on windows xp
Go to where you have configured the static IP addresses for your network adapters. Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter. Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.
This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx). This is usually accomplished in the router configuration page.
HTH,
JW -
I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?
First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).
You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.
8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this). An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.
There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free. To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: multiple monitors
I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?
Hi David,
Thanks for posting your query on the Microsoft Community.
I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.
Check out the link:
http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1
You can also check:
http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I have one drop-down list box where one selection (options) is the other.
I have one drop-down list box where one selection (options) is the other. If a user selects the other, I want to conceive the possibility for them to enter some Notes to describe their other. A pop-up window or the text box is possible? Do not know how to approach the issue... Thank you!
The field in parentheses is the text (or drop-down menu or other) you want to display when "Other" is selected and hide when it is not.
If you want to apply the same logic to several fields just duplicate this line of code, the field name in each copy of setting.
Maybe you are looking for
-
Hello I was wondering if anyone has had this problem. I have a Qosmio G20-139, which was purchased from Jan. 2006, in the last two weeks, it seems to freeze. I have to power it down, when I re turn on it does nothing. If I leave it for about 1/2 hour
-
Issue of table + write to the file
Hello, I am using USB-6009 with Labview 8.5 I searched and passed tutorial table and still confused about acquisition of data...:) So here's what I'm doing (simple) I have two tension analog (AI0 AI1) returns through the DAQ assistant and I would lik
-
OfficeJet Pro 8600-COPY Question
How to copy a page 2 faces on a page? In other words, 2 face 2 face...
-
I am running Windows XP Professional SP3 with Kaspersky Internet Security 2012. Windows is no longer automatic updates (don't know how long it has been like that), and when I try to manually check for updates from the Windows Update Web site, an err
-
I know that my HP Pavilion is infected, tried everything to get rid of these critters, but to no avil still. Home Premium is preinstalled on my computer, and received no disc. I completely format my hard drive. I need to know if I can use my recov