Reliability Monitor does not work, please help.

Similar Questions

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• Hi my audio - pc does not work please help me

  Hi my audio - pc does not work please help me

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  In Windows 7

  Click Start > Control Panel

  Click on hardware and sound

  Under sound, click on manage audio devices

  Under playback (tab)

  Choose speakers you have in your output device

  Click Properties >

  Click levels (tab)

  check if the value is 100% >

  GoTo Enhancments > select Loudness balancing

  Apply and OK

  Should be much stronger now...

  For enhancment bit,.

  and if you have HD realtek soundmanager (R2.37) in your control panel

  Try a classic Equalizer setting

• Browser blackBerry Smartphones does not work, please help.

  I have had my Blackberry for about a month and a half.  For the first weeks, the browser worked fine and everything was great.  But now, the browser does not work.  My email, twitter, facebook, etc. all are still working fine, but can not access anything through the browser.  Does anyone know why this might be?  I know that I have to take it to the company store, but I live in a Spanish speaking country and don't speak much Spanish.

  Thanks for any help!

  Hi and welcome to the Forums!

  I suggest the following, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message to your BB to come):

  (1) registry HRT

  • Homescreen > Options > Advanced Options > host Routing Table > (it matter little what line is current) > sign up now

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If not, then please provide delicate symptoms of what's going on... "does not" isn't really we give good to go. Is there an error message any?

  Thank you!

• Photoshop CS6 "save under" does not work - Please Help!

  Hello!

  I have a question, and I can't seem to find a lot of answers for her

  So I have Photoshop CS6, and I know how to use it, I was

  used for a while. Everything worked fine on my old laptop,

  but I encountered some problems on my new laptop.

  So I worked on a painting for hours, everything was well-oiled

  Once I'd had enough and will save my. PSD as one. JPEG

  For some reason when I click on "save under" nothing appears

  The usual pop-up window did not show upward, not even an error window pops - up program

  I am really confused and extremely frustrated

  I was clicking on the "Save as", but still nothing is happening, I tried to restart, and it did not help.

  My "Save" pictures normally, but the "save under" does not work. It is not grayed.

  My picture is RGB 8 bits, the size is 900 x 1200 and image resolution is 300

  I use Photoshop CS6 on my Lenovo Yoga 3 Pro 1370

  Someone please help! I was very frustrated by that.

  Try to reset the Photoshop preferences:

  Hold down the CTRL - Shift - Alt from the cold Photoshop start.  If you get the keys to the low enough - quickly and you have to be VERY fast - it prompts you to confirm the removal of your established preferences, which will lead to them all being the default value.

• Photosmart premium C309a to flat glass copy does not work, please help.

  I get the error message 'Original Jam' and ' reload the document and then restart work ", when I try to copy from the glass flat.

  Please help if you know how to solve this problem as soon as POSSIBLE. Thank you.

  Hi, I just took one of these all in printers for my office on site, so I wanted something that does everything in one package.  For the price with discounts and rebates, I couldn't let this go.  While I was in the store, the printer he had the same problem as described, but I thought he was just manipulated man so I went and picked up one.  After setting up this morning and going through the features, I continued to get this message when I tried to scan, copy or fax:

  "Original Jam".

  "Reload the document, and then restarting the work.

  It seems that the printer does not know when to stop once the feeder is empty and has no more paper to deal with.  After playing with the printer to search for clues, I opened the top paper feeder and glanced at the mechanism that pulls the paper in.  On the cover there is a picture that shows how to get out of gear.  I managed to pop the mechanism as shown outside.  When I went to reinsert the gears, it does seem easy, but after some tests of attention, the seat of gears in which they must be.  You will notice that the left rear of the printer, denoting the set of gears, there is a latch-hook with equipment which still supported upward.  I have to be down, but mechanically, it is designed to be in the air in the non-operational position.

  After I reinstalled the paper training gear set, I double-checked all the features of the printer and it seemed to work fine.

  Suggest users try to remove and reinstall the mechanism to see if this corrects the problem.  Don't forget, the latch with a gear on the top left rear of all remains sustained upward, so it's normal.

  I hope this helps!  God knows that HP will not help you when you need it.

  I had the scr * ed on their PC HP Pavilion Slimline 3020n.  HP is fully aware of a motherboard design flaw that they neglect to difficulty.  They recognize the design defect and continue to deliver parts until exhaust you the warranty!

  -Glenn

• Direct3D does not work please help!

  Hello everyone I just install a game in windows 7, after installation, I could not start the game. A mistake came like this: "cannot find compatible Direct3D devices. Please make sure the correct graphics driver is installed on your system, and the Direct3D acceleration is enabled. I have come to the DirectX Diagnostic tool to check. On the System tab, I found that the version of DirectX is DirectX 11. In the view tab, all three DirectX features "DirectDraw, Direct3D, and AGP Texture acceleration" are all unavailable. And I could not find the button "Activate" to activate. This isn't like Windows XP, you can find the button "Enable" and "disable". He appeared to anything here, but aid "not available line.please!"

  Hey Kevin,

  1 are. what game you referring?

  2. What is the brand and model of your computer?

  As you are facing problems while playing games, refer to the suggestions at the following link. DirectDraw or Direct3D option is unavailable

  http://support.Microsoft.com/kb/191660

  Note: After checking the functionality of boot using method 5, follow the suggestions in "How to return a normal Windows startup mode" of the

  Hope the above information is helpful.

• My edges tool refine used to work correctly in the past, now it does not work, please help

  Hi I have been using photoshop for more than 6 months and in the past, that he used to have no particular problems with the edges tool to refine, but unfortunately now it don't work very well, every time I try to choose the RADIUS manually (inside the edges of refine it) it starts distort the pieces I tried manually to improve with the selection edge brush , I'm just trying to refine the selection of hair and its been a month since it doesn't normally. I've even reset all the settings in photoshop but its still the same, I used a lot of pictures, so is not just a specific image that it cannot be improved, it's the same thing with all the images, even with a tight white background.

  Please contact me as soon as possible...

  Thank you

  • Open the Photoshop preferences > Performance >
  • Select the large and flat
  • Restart Photooshop

  

  ~ Assani

• in all tabs, even my phone certificate error does not work please help!

  Where can I renew a certificate?

  Hi Tammy,

  Thanks for the reply.

  I suggest to follow the steps in the link given below and check if it helps you.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850/en-us

  Let us know the status of the issue.

• I always can I not download photo elements 11 Please help me, how can I download you provide a link but it does not work pleas help me

  I always can I not download photo elements 11 Please help me, how can I download you provide a link but it does not work pleas help me

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

• I try to install my cs6 online ot. It is said that my code was bought, but I took it out of one of my laptops to download on it. It still does not work. Help, please

  I try to install my cs6 online ot. It is said that my code was bought, but I took it out of one of my laptops to download on it. It still does not work. Help, please

  Quickly find your serial number

  Download the CS6 products

  Activation & deactivation help

  Mylenium

• Insert shortcut key (in) do NOT work, please help.

  Hello

  I am working on a project and did something (I don't know what), makes the Insert key (comma (,) don't work.)  In addition, the little icon on the screen of the source monitor does not work.

  Help, please.  I restarted the program, still no luck.

  OK, I figued out.

  The V1 and A1 on the area of sequence have been UNSELECTED.  I chose them and now it works.

  

• I have two versions of the same book on my iphone and ipad.  I want the same book, so I can study on each device.  I tried to remove the books and start again.  It does not work.  Help.

  I have two versions of the same book on my iphone and ipad, which are not synchronized with the other.  I want the same book on each device, so I can study on one or the other.  I tried to remove the books on my phone, ipad & itunes and start again.  It does not work.  Help.

  Hello david.hogan87,

  Thanks for posting about what is happening. If I understand you correctly, you have a book you want on your iPhone and iPad, but neither is synchronizing correctly to have both.

  Have you checked every device to confirm that the same identifier Apple is signed all three?

  iPhone and iPad: head to settings > iTunes and App Store

  iTunes: on a Mac, it's under account or installed depending on the version of iTunes store.  On a PC, it is also under account, and if you don't see the menu bar, click on the triangle in the upper left corner to view the Bar Menu or CTRL + B on the keyboard.

  If all 3 have the same signed Apple ID, post the version of iOS and iTunes for all three devices here, please.

  Best regards.

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.