remind.exe message problem?

Similar Questions

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• Picked up a virus and the system restore but now used when logged on obtaining a C:\windows\system32\rundll32.exe message trying to access some of the programs? Help!

  Part using the computer seems to have picked up a virus. Another person signed and restore the system. That seems to have stopped virus but when the person initially tries to use their sign on happens c\windows\system32\rundll32.exe message when it tries to access some programs (check mcafee, visit the center of security etc.) when you try to open some programs on the main screen, it says "choose program to open this file" mcagent.exe.   Any help would be appreciated.

  Hello

  It seems that the virus is not completely removed. I suggest that refer you the link to retrieve the computer of infection and check if it helps.

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Let us know if it helps.

• The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?

  The event GWX.exe messages must remain on the computer after you made the reservation for a copy and agree to receive their copy?  It certainly is learning to be OVERLOAD on these messages and would like to know if it is OK to remove them and what to do to STOP these messages.  I asked the program and I've been accepted/approved/reassured that will ship a copy - JUST WANT TO KNOW IF I CAN REMOVE THIS sort of THINGS NOW, OR should she REMAIN ON MY COMPUTER?  It's the only question I have that needs to be answered. Thank you

  ybliku2

  Since early may, Microsoft began providing updates prerequisite for these systems for the upgrade. Known as the get Windows 10 app (GXW) this KB update installs the mechanisms to verify your system readiness and download Windows 10 through Windows Update. Users will see a notification added to the taskbar allowing users of the availability of the operating systems and of the possibility to book the update and download automatically on July 29^th 2015.

  You can also download Windows 10 as one. ISO file and do the upgrade manually:

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

• problem cartridge carrier, get the message "problem paper jam.

  The cartridge holder snaps from one side to the other, and I get the message "problem paper jam.  The problem is new to me.  What should I do to solve the problem?

  Hi Alan,

  The information provided in your post is not sufficient to diagnose your problem. To at least tell you if it's a hardware or software problem, we need to know the name of the printer manufacturer and model number, when exactly meet the problem and what are the symptoms you see.

  Usually, a paper jam is caused by a hardware failure in a printer. So, at this point, I also suggest you go to the website of the manufacturer of the printer support and ask for help on their part. This can help you better.

  Hope that this information gets you started in the right direction. Please respond with more information about the issue so that we could help you more.

• Impossible to save anything in the Gallery of CreataCard, get the error message "problem sending command to the program".

  I'm having a problem when using CreataCard. The program was working fine, but now I can't save anything in the gallery. I get the message "problem sending command to program." I tried to restore to an earlier time, but it does not solve the problem. I deleted the program and re-installed, but it did not help. I can find and click a CreataCard file and it opens in CreataCard.

  Hi O.N. Blevins,.

  I suggest to go to the American Greetings here support site to get help with their software.

  Thank you!

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• When you open Illustrator I get the message: problem loading 'photoshopimport.aip"(connect). I can't access my fonts. I use an iMac 2012 27 "running on 10.10.2 Yosemite

  When you open Illustrator I get the message: problem loading 'photoshopimport.aip"(connect). I can't access my fonts. I use an iMac 2012 27 "running on 10.10.2 Yosemit

  Lucas,

  According to me, which should solve it:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

• REMIND. EXE MESSAGE - HP Pavilion t3729-Vista Home Prem

  Hello, I have a problem that is repeated with the message "Call back" Exe"flashes on my taskbar, whenever I have access to the internet.

  If I "allow" nothing seems to happen, if I refuse, he'll just here until the next time I access to the internet.

  1. He has the sign that I associate with folders of HP

  2. it slows down access program until I have clear it.

  3 many analyses conducted since this developed, never a problem illustrated.

  No idea how to get rid?.

  Thank you very much

  Hello again.

  Thanks again for your response. While I did not see the 'run' you speak, I reread your post and realized that I had put an entry flayed in the search; Misconfig instead of 'msconfig '. When I typed in the correct word, I accessed the file ok.

  I understand what can safely be disabled now.

  Thanks again

  Concerning

• After Kapersky, security software CEC_HOME.exe message appears at startup

  I recently installed kapersky security software on my Satellite L300-19Y.
  Accordingly, I have the message to reinstall CEC_HOME.exe each time on start up?
  Does anyone know how to do this?

  What is the result if I ignore it?

  I never heard of this error with Kaspersky.
  I use Kaspersky a few years and I never had problems with this good anti-virus program.

  I want to reinstall Kaspersky and after installing an update.

• HP 17' want i5: accelerator.exe wit problem after update of windows 10

  After you install the new version of windows 10 February 2016, I get an error message on startup accelerator.exe. When HP will fix the problem of driver?

  Hello:

  See if it works...

  Download and save this driver.  Do not run it immediately.

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71839.exe

  Go to Device Manager and expand the category system devices.

  Find the HP Mobile Data Protection sensor.

  Right-click on the device and select uninstall.

  Also check the uninstalling the driver box.

  Restart the PC and then install the driver that you have downloaded.

  Restart the PC again after installing the driver.

• Using XP Professional with SP3. WMIC.exe recurring problem

  Get an application error. Memory could not be written. I click Cancel, which is the option of debugging, but during the day, it appears again. Doesn't seem not related to a specific action.

  I don't have this error message in my notes (in other words, I have never seen this), but it also seems that you could not sent us the accurate and complete error message you see.

  So I don't know if this will help or not.

  However, if I wanted to rebuild the repository of Windows, I would never the way suggested - I would like to do it this way (which solves with success the other WMI problems I have in my notes):

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services applet.

  Locate the Windows Management Instrumentation Service.  If the status column indicates that the WMI Service is started (ongoing), right-click on the WMI Service and choose to stop the WMI Service.

  Answered in the affirmative, if requested to stop Security Center and Windows Firewall Services (with stopped services, your system is vulnerable to attacks from the Internet, so do not receive is not on the Internet again until you reboot your system).

  Now would be a good time to check also the properties of the WMI Service to make sure the startup type is set to automatic for the Service WMI will start automatically the next time the system is restarted.

  The Explorer, navigate to the following folder (assuming that your boot drive is C):

  C:\Windows\System32\Wbem\
   
  Locate and then rename the folder "Repository" to something, as you remember, such as:

  Repository.Old

  Restart the computer, and then make sure that the WMI service is restarted automatically and that a new repository folder has been created to replace the one that has been renamed.  It may take a while to completely rebuild the file storage (several seconds or minutes) so expect it ends.
   
  After the reboot, you will notice the wmiprvse.exe Service running in the Task Manager and it will continue to run until it completes the reconstruction of the repository (this may take a little time).

  The rebuilding process could take several minutes depending on your system, but eventually the wmiprvse.exe Service ends and disappear from the Manager tasks.

  If you then look at the Event Viewer Application log, there may be some error messages like this:

  Event type: error
  Event source: WinMgmt
  Event category: no
  Event ID: 4
  Description:
  Failed to load C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V4.0.30319\MOF\SERVICEMODEL MOF. MOF by retrieving the file from the repository.

  This is normal because when the system restarts, the wmiprvse.exe process has to rebuild parts of the repository as well. It is a mistake to sequence as shown below. You should not see these mistakes again after the system has been rebooted and catches up and finishes rebuilding the WMI repository.

  Explanations for errors encountered in the case of the Application of visualization of the newspaper the WMI repository is rebuilt:

  Explanation
  Windows Management Instrumentation could have tried to compile the file (mofcomp) a .mof marked for ASR, but compilation failed. This is probably due to a sequencing problem.
    
  User action
  To correct the problem, try to compile the .mof again. If this does not resolve the problem, contact the provider of technical support for the program in question.

  You shouldn't need to do something about these error messages and do not see again them after that XP has finished rebuilding the WMI repository.

  I can't say how long this will take to rebuild, maybe 10 to 15 minutes until it settles completely.

• Download the c;/windows/system32/systempropertiesadvanced.exe message. application not found?

  Original title: How to fix a registry problem?

  Hello world

  tried to restore the laptop to previous day, but get the message c;/windows/system32/systempropertiesadvanced.exe. application not found?

  Hello
  Thanks for the recommendation, I managed to solve the problem by establishing a new account, they allowing me access to the program of restoration, so I restored to last week which got rid of the offending virouse.

• After removing the feature new tab, I get a message "problem loading page" instead of a blank page.

  I followed the steps on the help page to remove the feature new tab I hate. So now there is "subject: white ' in the address bar as before, but now, I get this message of 'problem' and I want to just my white back page.

  Hello

  You can try to reset by clicking right on it. You can also try to enter Subject: empty as the value.

• THCI.dll and TFncky.exe message at startup

  HY!

  Whenever I have start Win XP it comes up with the message that TFncky.exe cannot be opened until thci.dll has not been detected. What can I do?

  thx for some bye matthew answers

  Post edited by: wayny

  Hello

  I put t know which laptop model you have but AFAIK THCI. DLL is required in the control of Toshiba folder. Please try to reinstall 'Toshiba' orders of Tools & Utilities CD that came with your Toshiba machine.