Remote control of air conditioning

Similar Questions

• Remote control

  I had a remote that came with the computer, but I can't seem to find how to make it work, all the batteries and everything works.  Send an email to [email protected] that the version or the hp's got is p6-065uk

  Hello

  I'm not 065uk , but I think that your machine is a 2065uk. The remote control should come with an IR receiver. You must plug the RECEIVER on #2 and both of them is the TV tuner (you may need an antenna for port #1 too). It can be used like any TV remote.

  

  1 - TV (air port)

• Apple TV signals Siri remote control as support when it is disconnected from the charger

  I just finished my Siri to load remote - it was down to about 50%, so I loaded for about 6 hours with my iPhone 6s charger.

  I now have it unplugged from the charger, but the Apple TV still shows the State remotely like loading when it obviously isn't.

  I tried to reset and re-twinning of the remote with Apple TV, but the State has not changed. Is there a way to fix this, or does take some time to update (maybe needs battery to drain a bit with use)?

  I have corrected this now.

  There seems to be two conditions for State of charge reliably updated when you have finished filling and want to disconnect-

  (1) make sure that you are on the Bluetooth - screen remote controls and devices with the battery icon on Apple TV

  (2) make sure that your charger is turned on when you unplug the connector of the remote control lightning

  I found that if the charger is turned off before I log out (which is something I usually do think its safer), the icon is not always up to date.

• Whenever I connect to a remote connection, I get an error message "unable to connect to this Terminal Server session remote control"

  Original title: unable to connect to this Terminal Server session remote control?

  Whenever I work with my friendly by connecting remotely, this information is pop ups as follows:

  Remote control cannot connect to this Terminal Server session. It is a known problem with Windows 2000 and XP and can occur under certain, rare conditions. To remady this situation, ask the local user switch to another session (connecting, on or off), or restart the computer.
  I know it's something related to windows authentication. But want to know in detail about this notification.
   

  Hi Victor,

  The question you posted would be better suited in the TechnNet Forums.

  I would recommend posting your thread in the link below:

  (Services Terminal Server) remote desktop services:

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• How to remote control Playbook

  Dear,

  My name is Yaniv I'm new on this forum, it's very nice to meet everyone.
  My basic question is on the remote control unit of the Playbook.
  When I say remote, I mean that I want to achieve a VNC type behavior. I don't mind separating the solution for the control (mouse events) and video (flow of images such as screenshots), but I need the two eventually.

  I don't mind what framework to use - Adobe Air, Java, SSH into the layer of qnx, etc..

  The thoughts and ideas (not to mention the reference to the solutions...) will be accepted with pleasure.
  Thank you

  That's right, that it is not X 11.  And QNX is not Linux, despite various ignorant writers, saying things like this in the last few months.  Even if it were, the things are currently locked enough that (it seems) things in layers of BONE would have access to the system in the way that you would need.  I suspect that this is not something that will happen without the direct support and action of RIM and QNX, even if it is a third party who does most of the work.

• I got an Apple TV, but it wasn't charger for remote control

  My Apple TV I have baught had no remote control charger what should I do?

  I have no answer.

• iPhoto und remote control

  Kann der of mit man Laufwerk eine Dia-Show taxes (loss/weiter) remote control?

  Google translation:

  Can I use the remote control Remote control slideshow (stop / continue)?

  If you still use aluminum Late 2008 MacBook 13 "the answer is Yes.  It has an IR compatibility for use with the Apple Remote.

  

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• Remote control/software Apple TV with the App Store problems

  Seems ridiculous that a Sept 2016 4th Gen apple TV purchase has the same problems of connectivity with the App store. Impossible to connect, or even choose App store, or spare parts offline, erratic, glitch and acts as a problem of distance, but seems to be a software problem or interface. Obvious corrections or ideas to stabilize or least to increase connectivity to app store with 4th Gen Apple TV/remote control?

  No problem of connectivity with a 4th getting Apple TV remote here... Sorry, you encounter this problem with it.

  See if there is something that will help that you haven't tried in this article to support > set up the Apple TV Remote - Apple supported application

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• Remote control for Apple TV

  Is - is this posible?

  Yes. Apple Watch has the Remote app, you can use to control your Apple Tv.

  Use your Apple Watch as a remote control for your Apple TV or iTunes - Apple Support

• Remote control loses connection several times

  Remote control repeatedly goes off line and then throughout the programs.  We loaded so that we can check the list of probable causes.  It has become a source of irritation when you're immersed in a movie and that appears on the screen.  Any fixes or suggestions?

  I guess you are referring to the distance of Siri to Apple TV version 4. If so, I think it turns off the Bluetooth radio when he sleeps. When you wake up it upward, probably by moving it (remember, it has a movement sensor), it reconnects and ATV reported 'remote control connected. " If this message is your problem, you could make it clearer in your title and description. Since you are immersed in the movie, I assume that you do not use the remote control to control the system. If leave him you alone, he has to sleep with happiness. If you use it to adjust the volume, maybe you can use a different remote for it.

  In addition, your profile (GIS) said Apple TV 2 iOS 9.2.1 which makes no sense. You should correct it, maybe for Apple TV 4, tvOS 9.2.1.