Remote data migration

Similar Questions

• Problem with the 4.1 vsphere data migration tool.

  Hello

  I guess that's the problem with trying to be an early adopt.

  I'm trying to upgrade my environment to vSphere 4.1. My old VC was 32 bits with a local SQl 2005 express (it's a lab - I don't want the full SQL version blown).

  I re isntalled on a x 64 2008 R2. No, it's fine. But empty... no license or anything like that.

  The docs say you can use the data migration tool to move the DB and config.

  I followed the instructions and after backup.bat running I get the following error:

  DB logs: HResult 0 x 2, level 16, State 1

  Named channel provider: could not open a connection to SQL Server .

  Sqlcmd: Error: Microsoft SQL Native Client: an error has occurred while

  establishing a connection to the server. When connecting to SQL Server 2005, th

  rupture may be caused by the fact that under the default settings SQL Server

  does not allow remote connections...

  Sqlcmd: Error: Microsoft SQL Native Client: login timeout expired.

  Error: failure of vCenter Server DB backup

  Output of...

  FYI, yes connections allow, is named pipes, sql browser started. Former VC works very well. The ODBC test OK. Running local and connected system as a local administrator. Tried running SQL express under the same admin account. Still broken.

  Very well, I can connect with:

  sqlcmd - s. \SQLEXP_VIM

  and

  osql /Snp:
  .\pipe\MSSQL$SQLEXP_VIM\sql\query EI

  So he has set up the right and listen...

  Only thing I noticed is that the papers say:

  vCenter Server DB instance:

  so it's not 'list in fact an instance...

  So I'm stuck. Any ideas?

  Thanks in advance

  Found the solution in this article:'t-work-hresult-0x2-level-16-state-1/ http://digitalformula.net/technical/sqlcmdexe-on-sql-2008-doesn

• How to download the VM of remote data store after the backup of veaam task?

  Hi all.

  I created the backup job with veaam in the remote data store and now I want to download the VM fmrom backup store, but I can't find the jobs saved only 4 files veaam VMX file: VMDK, NVRAM, VMXF, VMSD but not VMX... How can I download the virtual machine with these files?

  Yes, in the wizard, select use the existing drive...

• The data migration to 4.1 problem

  Hi guys,.

  I've read and done almost everything in the present statutes and still did not solve my problem with the Data Migration tool.

  Everything seems to go smoothly, but once the restore is complete, I find myself in a situation where two things are are produced.

  Firstly - restored configuration is not in fact restored - vacuum.

  Second - my vCenter is proud to announce that its evaluation license has expired. Either way, it's good to know (means that at least the period of assessment and departure have been migrated).

  I am of the opinion that when I run the Backup I don't see that it backs up the license keys. I looked at the official youtube film of VMware and I can certainly see that the license information must be saved.

  Any suggestions?

  Maybe the KB article "using of the tool of migrating data upgrade to vCenter Server 4.0 to vCenter Server 4.1 fails' help.

  http://KB.VMware.com/kb/1024380

  André

• Data Migration tool does not exist in the new version

  Please, I need the last data migration tool or the latest version that has been on the data migration tool, because I installed the new version and want to migrate my DB to the new version, but the data migration tool not included in the new version
  
  Thank you
  Year s

  I think you mean the Microsoft Access database. OATMEAL Version 8.x is old enough. You must talk to the best Oracle path for upgrade. Version 12.x is not easy to use for the migration of access. There may be a way described in that link I sent before.

  There is always a version of available 9.3, which can have migration GUI appl
  http://www.Oracle.com/technetwork/OEM/app-test/apptesting931-1610487.html

  At the very least, it is possible if you install version 9.2. Here is the doc there to 9.2
  http://docs.Oracle.com/CD/E25294_01/doc.920/e14620/toc.htm#CHDFFHAI

• What is the experience of Migration of PMS Data and Scripts of data Migration

  Hi just what is preparation of PMS and Scripts of data Migration Data Migration experience
  Why do we use these in HRMS (EBS)

  PL provide a link to where you got these terms of.

  'PMS Data Migration experience' is not a term EBS - most likely a seller or third expression/tool/software.

  "Data migration" in HRMS (other EBS modules) generally refers to the process of transferring data from a legacy system to the EBS during the process of going live with EBS.

  HTH
  Srini

• Issues of data Migration

  Hello
  
  I'm trying to migrate my SQL Server 7 database to Oracle 10 g R2 using SQL Developer (Version 1.5.1
  During the migration of the data, the process is complete to halfway through due to network problem.
  Is it safe to repeat the migration of data from there?
  SQL Developer migration Workbench "know" when to seek where it terminus? This will create duplicates of records in the target database?
  Any recommendations on the best approach to migrate the data will be much appreciated.
  
  Thank you
  wilora

  Hi Wilora,

  Developer SQL 'know' the migration of the previous data.
  You must truncate all your tables first. You can write a quick script to do this.

  SELECT 'truncate table ' | table_name | ';' From user_tables; -of course be connected to your migrated user.

  Then proceed to migrating data again. Online data migration is designed only for smaller data sets, say<100 mb.="" if="" you="" have="" a="" network="" issue="" again.="" i="" would="" truncate="" the="" tables="" so="" they="" are="" ready="" to="" receive="" the="" data="" again.="" and="" use="" the="" offline="" data="" move="">

  Heres a quick Viewlet of offline data move
  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/OFDM.html

  Kind regards
  Dermot.

• Enterprise remote data deletion

  Hello everyone, I'm still new in the it field. I got a year ago, with a degree of general partners of a school local tech. I'm currently studying for my Windows 8 cert. I read an e-book and came across remote deletion of corporate data. I was talking to a colleague who is interested and wants to learn more. I'm doing some research on this subject. What I understand users can use their smartphone or laptop and connect to the network/domain to access the data. If the laptop or the phone goes missing, we can use this tool to remotely wipe the device or temporarily to make the data on the device unusable. I understand that RBDR is using Exchange ActiveSync to management along with Active Directory for authentication. Many of our customers use Office 365, so everything is done in the cloud. I have done a lot of research on Google but have not found much RBDR except that it is. Can someone help me understand this tool or point me to a good article that explains a bit more in depth about how this works.

  Any help is very appreciated. I'd like to understand what this tool and how it works.

  Thank you.

  Brandon

  Removal of remote enterprise data: Allows personal devices to connect to, access and store the business content that can be effectively removed from the device by HIM at a later date, while retaining the personal data intact.

  Selective Windows wipe for the management of data from devices

  http://TechNet.Microsoft.com/en-us/library/dn486874.aspx

  Do a wipe on a Mobile phone remotely

  http://TechNet.Microsoft.com/en-us/library/aa998614 (v = exchg.150) .aspx

  I have earlier recommended that you post on TechNet Forum.  These are specialists who are better able to answer all your questions about RBDR.  You can also try to post questions on this site Office 365.

  http://Office.Microsoft.com/en-us/Office-365-Business/Office-365-small-business-Setup-Center-HA104218051.aspx

• Replication over 1 GB for remote data center links

  I Compellent LUN in a city and you want to replicate to a Compellent storage array in another city. We only link to 1 GB and 500 GB of data to be replicated. I guess an asynchronous replication would be necessary, but you should know how it will affect the traffic production on this link when replication is drawn. These off-peak hours do?

  You can use QOS on the HDS to mitigate network contention.  When configure you QOS, you choose your connection speed, and then if you enable the throttling you can choose up to time what percentage of replication of this link can be used.  It will use as much as you give so you should have an idea how much data 'regular' traffic consumes on the link and throttle below only if you want to make sure that you will not influence the movement of the production. BUT you should know that you can actually finish the repetitions in a reasonable amount of time. If this isn't the case, then you need to increase bandwidth or watch using a bandwidth optimizer that will compress/data deduplication until he goes on the wire.

  The choice between Async/Sync is a bandwidth issue, but especially Sync requires low latency, since the acknowledgement of receipt must be made prior to the remote SAN then before local SAN it goes back to the server.

• The Tungsten T3 for Palm Pre data migration

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  When I launched DTA, I got an error. I tried several things and looked in the forums, but only to find tips for v6.2. In the end, I decided to upgrade to v6.2 in my Windows XP, but I skipped stage of synchronization with my camera (such as the T3 is not compatible). Then I run the DTA. This time, I got to the step when it asked me to connect my pre as a USB key. But after that, he tells me that Palm Desktop is installed, but contains no data to transfer. However, I can see my data in the desktop. My guess is that I could solve the problem if I could synchronize with a PDA compatible.

  Can someone give me a hint on how to transfer data to my pre of my T3? Is this possible at all?

  Thank you

  T

  Hello tekila29 and welcome to the forums of Palm.

  tekila29 wrote:

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  You will not be the Tungsten T3 or the Palm Desktop 6.22 Pre - synchronization you will use as a vehicle to move the data into your pre.  I suggest that you use the command Export of Palm Desktop 4.1.4e for export data PIM (Contacts, calendar, tasks and Memos) out as a file in comma-delimited (.csv) as a backup before installing Palm Desktop 6.22 as the data upgrade process can not be cancelled.  If you need to go back to Palm Desktop 4.x and do not have a backup, you will be out of luck.

  After you have backed up your data, I upgrade to Palm Desktop 6.22, DTA can migrate your data in the meadow and then synchronize the Pre with a Google account to access e-mail and calendar.

  To fix your data problem in the second part of your post, you can try to install free third-party utility, PalmHotSyncSetup.  This changes the Windows for Palm Desktop registry keys so that he could support the older devices like the Tungsten T3.  You can download PalmDesktopHotSyncSetup from Pimlico Software Web site.

  Hope that helps,

  Alan G

• Data migration of EBS to 12.2.4 EBS 11i

  Hi all

  EBS 12.2.4

  RHEL 6.5

  We migrate our EBS 11i to EBS 12.2.4. Can you help me please what is the correct procedure to migrate data?

  For example in the GL/tables schema in 11i, assuming that our functional did the GL R12.2.4 module setup.

  How I extracted the tables in the schema of GL 11i database and load it into the scheme of database R12.2.4 GL?

  Is it possible that the data loader itself will be to install the module GL R12.2.4 based on configuration data extracted from the 11i database?

  Is it possible to copy the configuration in 11i and fill on R12.2.4?
  

  
  

  
  

  Thanks in advance for your kind cooperation.

  
  

  JC
  

  Hello

  You can do this by using WebADI.

  Since you are going to extract only the balances so this task will be easier in extraction and loading.

  The tables of the interface of 11i and R12 are not very different.

  Almost the same method used by entering data in 11i usable in R12. The data to be loaded will be on spreadsheets prepared by users and validated by the business consultants.

  The application developer should not take the data by itself and insert it into the new system.

  You can do a quick search and find lots of resources on the topic.

  http://Oracle.ITtoolbox.com/groups/technical-functional/Oracle-Apps-l/data-loading-in-gl_interface-Oracle-R12-5011222

  http://kommaoracleapplications.blogspot.com/2012/08/complete-GL-interface.html

  Kind regards

  Bashar

• Oracle - principle of cloud data migration

  Dear Experts,

  We intend to migrate data to oracle on site to the cloud.

  Due to the nature of the data that we'd spend only snapshot of the last 1 year 6 months to cloud and archive rest all data.

  Question:

  Size of the data to be archived is 630-650 GB. We would like to migrate this data to a generic rather than the .dbf file format, so that we can port these data in any technology as and when necessary.

  I would be interested in any suggestions on the best approach to achieve the same.

  Kind regards.

  AJoshi

  Hello

  I've heard customer they unload their data in textfiles calles so.

  These files would be transferd here at amazon cloud and afterwords they load the data via sql loader in the cloud.

  I don't know if this is the best way but it works

  concerning

• Areas of data migration

  Hello
  I am looking for a solution migrate areas of data from one short server to another. We try to centralize the system and store all areas of data from several servers to a particular server. The version of the server short is 7.6.1 for all servers. Is there a way we can migrate to another server in short version even without data loss?

  Thanks in advance.

  Please see "Backing up the Index": http://docs.oracle.com/cd/E40521_01/server.761/es_admin/toc.htm#Backing%20up%20the%20index

  In this procedure, you export and import of data areas: http://docs.oracle.com/cd/E40521_01/server.761/es_admin/toc.htm#Exporting%20and%20importing%20a%20data%20domain

  The two subjects are in short 7.6 Server Administrator's Guide.

• Return of OUD to ODSEE data migration

  Hi guys,.

  I work with one of my clients on the migration of a bunch of parameters ODSEE of OUD. During deployment, we arrived at the front door running and everything was fine runnign as it should.

  For some unknown reason, however, the ODSEE suddenly began to refuse updates, and we therefore found ourselves in a scenario where the OUD had data more specific that would be rejected by the ODSEE through the gateway of the replication.

  We wanted to reset the ODSEE with the OUD data form, but that there is the ds2oud tool and the export of substances on the side of ODSEE, y at - it an option or a tool for generating a LDIF friendly ODSEE?

  Thank you very much

  Olivier. /.

  A more information: currently there is no tool to adjust entries OUD reimport them in Department and keep the replication metadata.

  An option would still be to export entries to OUD (export-ldif) and use the-e option to filter the attributes of replication metadata specific oud.

  OUD exposes the entryUUID. Which equals ODSEE nsUniqueId, but the format of the value is slightly different, so the nsUniqueId will need to be adapted with a script.

  Sylvain

  ------

  When closing a thread as answered don't forget to mark the messages correct and useful to make it easier for others to find their

• Can I use a NAS as a remote data store

  I currently have 5 cisco ucs esxi hosts to my main place. I'm looking to get rid of the old servers to each smaller branch location. I was wondering if I could put a NAS at each branch and use the NAS to connect its main location esxi hosts remotely and use it as a data store.

  -Main branch therefore has all esxi hosts

  -Remote sites (10 of them, a few miles) place a NAS that will be the data to the site store.

  -L' idea is to keep the user data at each remote site and didn't browse the EXTENDED network

  If so, of the recommendations on a NAS?

  Welcome to the community - is that you're looking to virtualize servers of your remote sites - if you were to store virtual machines in remote offices you will be magnifying the amount of data flowing through the WAN connections - I store the VMs remote offices in the same location as the ESXi server that will host virtual machines