Return of OUD to ODSEE data migration

Similar Questions

• Services Web site deployment error "server returned nothing (no header, no data)" and much more

  I develop a VI on a large scale with a VI of web service combined in 2010 SP1. The "auxiliary" VI is responsible for storage of data capture and analysis as well as data and communications. It's big enough and communicates with the web method VI through shared network variables [and I use the DSC module to allow the management of shared variables of events].

  I can build and deploy the web method VI very well and it runs great. However, I need to communicate between the auxiliary and web method VI, and it seems that I can't do without including the auxiliaries vi when generating RESTful web services [also, is there a way to make this web service generates?]. When I added the auxiliary vi for the construction, he built very well, but then I got during deployment:

  "Server returned nothing (no header, no data).

  The next time I tried to deploy, I got a fake NI Auth dialog by this knowledge base article. By following the instructions for case 1 ["failure of Web application server since last started"], I ran Services.msc and found that NEITHER Application Web Service was not running. I tried to restart the service, but got this error:

  "The NI Application Web Server service on Local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the service logs and alerts. »

  Knowledge base article suggests to restart at this point and I did, but I still see the same behavior. So really, I have a few questions:

  1. is it possible to deploy a variable library shared on the network through a local web service deployed and VI?

  2. What are the causes "server returned nothing (no header, no data)" in the deployment? A google search gave very little.

  3. what this means: "NI Application Web Server service on Local computer started and then stopped... '. "and what do I do to get my Web Application Server up?

  [to pile on the pile... I tried to re - activate the localhost:3580 Web application server and got an error. Localhost:3580 then offline also.]

  Thank you!

  Update.

  I noticed that the Web application server attempted to deploy the web service broken and choke her. There seemed to be no way to clear the .lvws created at the origin of the construction. I was able to remove the deployment folder to \UserServices\deployed\ $(WebServicesRoot)- , but it has been recreated from the .lvws whenever I tried to restart the service.

  So I called NOR and they told me this directory [XP]:

  C:\Documents and Settings\LocalService\My Documents\LabVIEW Data\WebServices\Standalone

  The .lvws has been in this folder. I deleted it and now I can run the ApplicationWebService. Apparently this file hidden undocumented is a "not-quite-bug" that is recognized as needing a fix in future releases.

• Remote data migration

  Hi DBA
  
  Y at - it a utility oracle to make the remote data migration or it is possible only with the help of some third-party software.

  GoldenGate Software
  Quest Shareplex
  SwisSQL

  Read on
  http://www.DBA-Oracle.com/t_migrating_to_oracle_3.htm

• The data migration to 4.1 problem

  Hi guys,.

  I've read and done almost everything in the present statutes and still did not solve my problem with the Data Migration tool.

  Everything seems to go smoothly, but once the restore is complete, I find myself in a situation where two things are are produced.

  Firstly - restored configuration is not in fact restored - vacuum.

  Second - my vCenter is proud to announce that its evaluation license has expired. Either way, it's good to know (means that at least the period of assessment and departure have been migrated).

  I am of the opinion that when I run the Backup I don't see that it backs up the license keys. I looked at the official youtube film of VMware and I can certainly see that the license information must be saved.

  Any suggestions?

  Maybe the KB article "using of the tool of migrating data upgrade to vCenter Server 4.0 to vCenter Server 4.1 fails' help.

  http://KB.VMware.com/kb/1024380

  André

• Problem with the 4.1 vsphere data migration tool.

  Hello

  I guess that's the problem with trying to be an early adopt.

  I'm trying to upgrade my environment to vSphere 4.1. My old VC was 32 bits with a local SQl 2005 express (it's a lab - I don't want the full SQL version blown).

  I re isntalled on a x 64 2008 R2. No, it's fine. But empty... no license or anything like that.

  The docs say you can use the data migration tool to move the DB and config.

  I followed the instructions and after backup.bat running I get the following error:

  DB logs: HResult 0 x 2, level 16, State 1

  Named channel provider: could not open a connection to SQL Server .

  Sqlcmd: Error: Microsoft SQL Native Client: an error has occurred while

  establishing a connection to the server. When connecting to SQL Server 2005, th

  rupture may be caused by the fact that under the default settings SQL Server

  does not allow remote connections...

  Sqlcmd: Error: Microsoft SQL Native Client: login timeout expired.

  Error: failure of vCenter Server DB backup

  Output of...

  FYI, yes connections allow, is named pipes, sql browser started. Former VC works very well. The ODBC test OK. Running local and connected system as a local administrator. Tried running SQL express under the same admin account. Still broken.

  Very well, I can connect with:

  sqlcmd - s. \SQLEXP_VIM

  and

  osql /Snp:
  .\pipe\MSSQL$SQLEXP_VIM\sql\query EI

  So he has set up the right and listen...

  Only thing I noticed is that the papers say:

  vCenter Server DB instance:

  so it's not 'list in fact an instance...

  So I'm stuck. Any ideas?

  Thanks in advance

  Found the solution in this article:'t-work-hresult-0x2-level-16-state-1/ http://digitalformula.net/technical/sqlcmdexe-on-sql-2008-doesn

• Data Migration tool does not exist in the new version

  Please, I need the last data migration tool or the latest version that has been on the data migration tool, because I installed the new version and want to migrate my DB to the new version, but the data migration tool not included in the new version
  
  Thank you
  Year s

  I think you mean the Microsoft Access database. OATMEAL Version 8.x is old enough. You must talk to the best Oracle path for upgrade. Version 12.x is not easy to use for the migration of access. There may be a way described in that link I sent before.

  There is always a version of available 9.3, which can have migration GUI appl
  http://www.Oracle.com/technetwork/OEM/app-test/apptesting931-1610487.html

  At the very least, it is possible if you install version 9.2. Here is the doc there to 9.2
  http://docs.Oracle.com/CD/E25294_01/doc.920/e14620/toc.htm#CHDFFHAI

• What is the experience of Migration of PMS Data and Scripts of data Migration

  Hi just what is preparation of PMS and Scripts of data Migration Data Migration experience
  Why do we use these in HRMS (EBS)

  PL provide a link to where you got these terms of.

  'PMS Data Migration experience' is not a term EBS - most likely a seller or third expression/tool/software.

  "Data migration" in HRMS (other EBS modules) generally refers to the process of transferring data from a legacy system to the EBS during the process of going live with EBS.

  HTH
  Srini

• Issues of data Migration

  Hello
  
  I'm trying to migrate my SQL Server 7 database to Oracle 10 g R2 using SQL Developer (Version 1.5.1
  During the migration of the data, the process is complete to halfway through due to network problem.
  Is it safe to repeat the migration of data from there?
  SQL Developer migration Workbench "know" when to seek where it terminus? This will create duplicates of records in the target database?
  Any recommendations on the best approach to migrate the data will be much appreciated.
  
  Thank you
  wilora

  Hi Wilora,

  Developer SQL 'know' the migration of the previous data.
  You must truncate all your tables first. You can write a quick script to do this.

  SELECT 'truncate table ' | table_name | ';' From user_tables; -of course be connected to your migrated user.

  Then proceed to migrating data again. Online data migration is designed only for smaller data sets, say<100 mb.="" if="" you="" have="" a="" network="" issue="" again.="" i="" would="" truncate="" the="" tables="" so="" they="" are="" ready="" to="" receive="" the="" data="" again.="" and="" use="" the="" offline="" data="" move="">

  Heres a quick Viewlet of offline data move
  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/OFDM.html

  Kind regards
  Dermot.

• Return TopCPU process variable rule data

  I try to customize the rule runaway_process and have some difficulty to retrieve the values of the data model. The goal is to have an email sent when this rule fires for some hostnames. The scope was pretty easy, but get the values of process variables to be included in the e-mail message is a challenge.

  The rule is defined in the TopCPU table and below that is Process_TopCPU. Can I return the latest value data there with:

  Server.get("DataService").retrieveLatestValue (Scope, "Process_TopCPU"). GetValue()

  However, this seems to return the rows in the table of 5 albums processes. I want to return the details (order, Pct_CPU) from the top of the page process only and looks like you have to go a little further below and pull data from Process_TopCPU_Entry. I do not understand how to return these individual values but... can anyone help with this?

  The difficulty here is that the Observations are so-called Observation complex (several processes CPU high of perception at any time)

  The following Scriptlet will work (assuming you reach on the host object.)

  It will search all ALBUMS of Cpu processes in the current collection that correspond to a specific filter criteria and create a string that contains name and uses CPU for each of them. I hope this will help you to build your own version for your use case.

  // Define the filter closure. you could do this inline but I like to declare this on it's own section for readabillitydef filter = { processEntry->  return processEntry.cpuUsage > 0.03}
  
  // use teh find Observation entries function which is part of the Foglight core functionallity and filter for Processes that use more then 2% CPU in my casedef entries = findObservationEntries(#topCPUProcesses from $scope.cpus#,filter)
  
  // Header def msg =  "Processes with high CPU Usage :\n"
  
  // create a single line for each process using a GString templatemsg += entries.collect{ "Name: $it.command  cpu: ${it.cpuUsage *100} %"}.join("\n")
  
  // return the message return msg  
  

  I've also attached a screenshot which describes the function used

  

• The Tungsten T3 for Palm Pre data migration

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  When I launched DTA, I got an error. I tried several things and looked in the forums, but only to find tips for v6.2. In the end, I decided to upgrade to v6.2 in my Windows XP, but I skipped stage of synchronization with my camera (such as the T3 is not compatible). Then I run the DTA. This time, I got to the step when it asked me to connect my pre as a USB key. But after that, he tells me that Palm Desktop is installed, but contains no data to transfer. However, I can see my data in the desktop. My guess is that I could solve the problem if I could synchronize with a PDA compatible.

  Can someone give me a hint on how to transfer data to my pre of my T3? Is this possible at all?

  Thank you

  T

  Hello tekila29 and welcome to the forums of Palm.

  tekila29 wrote:

  Hello

  I am the owner of a Palm Tungsten T3. I have a lot of contacts, calendar, tasks and Memo data in I want to migrate my new Palm Pre. I saw Palm information on how to move the data from Palm Desktop for the pre, using the data transfer Assistant (DTA). However, it seems to work for Palm Desktop v6.2. T3 is not compatible with v6.2, being the latest sw version v4.1.4.e.

  You will not be the Tungsten T3 or the Palm Desktop 6.22 Pre - synchronization you will use as a vehicle to move the data into your pre.  I suggest that you use the command Export of Palm Desktop 4.1.4e for export data PIM (Contacts, calendar, tasks and Memos) out as a file in comma-delimited (.csv) as a backup before installing Palm Desktop 6.22 as the data upgrade process can not be cancelled.  If you need to go back to Palm Desktop 4.x and do not have a backup, you will be out of luck.

  After you have backed up your data, I upgrade to Palm Desktop 6.22, DTA can migrate your data in the meadow and then synchronize the Pre with a Google account to access e-mail and calendar.

  To fix your data problem in the second part of your post, you can try to install free third-party utility, PalmHotSyncSetup.  This changes the Windows for Palm Desktop registry keys so that he could support the older devices like the Tungsten T3.  You can download PalmDesktopHotSyncSetup from Pimlico Software Web site.

  Hope that helps,

  Alan G

• Data migration of EBS to 12.2.4 EBS 11i

  Hi all

  EBS 12.2.4

  RHEL 6.5

  We migrate our EBS 11i to EBS 12.2.4. Can you help me please what is the correct procedure to migrate data?

  For example in the GL/tables schema in 11i, assuming that our functional did the GL R12.2.4 module setup.

  How I extracted the tables in the schema of GL 11i database and load it into the scheme of database R12.2.4 GL?

  Is it possible that the data loader itself will be to install the module GL R12.2.4 based on configuration data extracted from the 11i database?

  Is it possible to copy the configuration in 11i and fill on R12.2.4?
  

  
  

  
  

  Thanks in advance for your kind cooperation.

  
  

  JC
  

  Hello

  You can do this by using WebADI.

  Since you are going to extract only the balances so this task will be easier in extraction and loading.

  The tables of the interface of 11i and R12 are not very different.

  Almost the same method used by entering data in 11i usable in R12. The data to be loaded will be on spreadsheets prepared by users and validated by the business consultants.

  The application developer should not take the data by itself and insert it into the new system.

  You can do a quick search and find lots of resources on the topic.

  http://Oracle.ITtoolbox.com/groups/technical-functional/Oracle-Apps-l/data-loading-in-gl_interface-Oracle-R12-5011222

  http://kommaoracleapplications.blogspot.com/2012/08/complete-GL-interface.html

  Kind regards

  Bashar

• Oracle - principle of cloud data migration

  Dear Experts,

  We intend to migrate data to oracle on site to the cloud.

  Due to the nature of the data that we'd spend only snapshot of the last 1 year 6 months to cloud and archive rest all data.

  Question:

  Size of the data to be archived is 630-650 GB. We would like to migrate this data to a generic rather than the .dbf file format, so that we can port these data in any technology as and when necessary.

  I would be interested in any suggestions on the best approach to achieve the same.

  Kind regards.

  AJoshi

  Hello

  I've heard customer they unload their data in textfiles calles so.

  These files would be transferd here at amazon cloud and afterwords they load the data via sql loader in the cloud.

  I don't know if this is the best way but it works

  concerning

• Areas of data migration

  Hello
  I am looking for a solution migrate areas of data from one short server to another. We try to centralize the system and store all areas of data from several servers to a particular server. The version of the server short is 7.6.1 for all servers. Is there a way we can migrate to another server in short version even without data loss?

  Thanks in advance.

  Please see "Backing up the Index": http://docs.oracle.com/cd/E40521_01/server.761/es_admin/toc.htm#Backing%20up%20the%20index

  In this procedure, you export and import of data areas: http://docs.oracle.com/cd/E40521_01/server.761/es_admin/toc.htm#Exporting%20and%20importing%20a%20data%20domain

  The two subjects are in short 7.6 Server Administrator's Guide.

• including return transport with the XML data in the table

  I am inserting data using XML in a table in a context of InDesign.
  As part of the text, I would put a few carriage returns, so that the text has a line break where I like it rather than that InDesign can do its best estimate as to how to split the lines.

  I tried to put & #8629; and < br / > in the text, but has not been what I hoped, he might.

  Any suggestions?

  Thank you!

  Hello Urban, try this:

  Roland

• script return do not store any data info

  Hi everyone, I think I'm missing something simple but impossible to find the tail of it.

  Here is a commonly used script that I've used in the past, but since I moved to another machine its not return don't not data store news.

  My CSV is full of great info, but the column for the data store is empty.  Thanks in advance.

  $VCServerName = "myVcenter".
  $VC = to connect-VIServer $VCServerName
  $ExportFilePath = "c:\Export-VMInfo.csv".
  $Report = @)
  $VMs = get - VM
  $Datastores = get-Datastore. Select Name, Id
  $VMHosts = get-VMHost | Select Name, Parent
  {ForEach ($VM to $VMs)
  $VMView = $VM | Get-View
  $VMInfo = {} | Select VMName Powerstate, OS, file, IPAddress, ToolsStatus, host, Cluster, data store, NumCPU, MemMb, DiskGb, DiskFree, DiskUsed
  $VMInfo.VMName = $vm.name
  $VMInfo.Powerstate = $vm. PowerState
  $VMInfo.OS = $vm. Guest.OSFullName
  $VMInfo.IPAddress = $vm. Guest.IPAddress [0]
  $VMInfo.ToolsStatus = $VMView.Guest.ToolsStatus
  $VMInfo.Host = $vm.host.name
  $VMInfo.Cluster = $vm.host.Parent.Name
  $VMInfo.Datastore = ($Datastores | where {$_.}) ID-match (($vmview.)) Data store | Select - first 1) | Select the value). Value} | Select name). Name
  $VMInfo.NumCPU = $vm. NumCPU
  $VMInfo.MemMb = [math]: round (($vm.)) (MemoryMB), 2)
  $VMInfo.DiskGb = [math]: Round ((($vm.)) Hard drives | Measure-Object-CapacityKB property-sum). Summary * 1 k / 1 GB), 2)
  $VMInfo.DiskFree = [math]: Round ((($vm.)) Guest.Disks | Measure - Object - property FreeSpace-sum). Summary / 1 GB), 2)
  $VMInfo.DiskUsed = $VMInfo.DiskGb - $VMInfo.DiskFree
  $Report += $VMInfo
  }
  $Report = $Report | Sort-Object VMName
  IF ($Report - don't ' ') {}
  $report | Export-Csv $ExportFilePath - NoTypeInformation
  }
  $VC = disconnect-VIServer-confirm: $False

  Strange, I just ran your script, and I get the info from the data store in the CSV file.

  Error messages?

  I guess that Get-Datastore returns all your data warehouse?