Remote Desktop connection fails and no error__

Similar Questions

• Remote Desktop connection failed but successful ping

  I am trying to connect via RDC (Remote Desktop Connection) of the SOURCE to the DESTINATION.

  I welcomed the remote connections on the DESTINATION and added couple of users who are allowed to connect remotely.
  I can ping DESTINATION SOURCE successfully.

  None of the responses failed to control below SOURCE
  C:\ > ping-l 512 f - n 100

  Strange thing is that I can remote login from DESTINATION to SOURCE, but not vice versa.

  I don't remember making any additional settings to other machines that are connected to remote. Only one machine (the DESTINATION) to the question.

  Any thoughts are appreciated.

  Thank you
  Biausse.

  On the target computer, make sure that Port 3389 is not blocked by a firewall.  If you use Windows Firewall, go to the control panel Windows Firewall, check that "Don't allow Exceptions" is not checked in the "Général" tab, then click the 'Exceptions' tab and make sure there is a check mark next to "Remote Desktop".

  You can also ensure that a program is to accept incoming remote desktop connections to raise a command prompt (start-> Run-> "cmd") and entering the following command:
  netstat - year |    find "3389.
  If all goes well, you should see the following line returned:
  TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING

  HTH,
  JW

• The deleted Remote Desktop connection icon and want to know how to add it back

  Hello

  
  
  I have Windows XP Home Edition and a VPS service for Forex trading.  I 'accidentally' deleted my DESKTOP CONNECTION link remotely located in START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS and I can't understand how he put on my desk, so I can connect to my VPS.  I'll have to type MSTSC. EXE in the box to RUN whenever I want to check my VPS and Forex, results instead of having an icon on my desktop to use.

  
  

  I tried to download SP3 again, hoping he would add the DESKTOP CONNECTION remote to its previous location in the menu START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS.  Then I was hoping she was send to office option or create a shortcut?  But my computer won't let me download it SP3 again on the existing SP3 file, so I'm stuck.

  
  

  Someone has a very simple solution, how can I put back the link or shortcut DESKTOP CONNECTION remote on my desktop but it works correctly and also back to START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS to connect on my VPS service Office?  I'm totally Luddite as you can tell, so I don't know if there is a major or minor problem, but I appreciate all the support!

  
  

  Thank you, Jim Pinkerton 

   

  Open search and search for mstsc.exe, where it is found right click and choose open folder, item selected right click and choose send to desktop, create a shortcut, it will be back on your desktop.

• Remote Desktop connection fails when the firewall is enabled.

  Trying to install Windows 7 Ultimate to allow the desktop remotely from a Windows Phone 8.1.

  I have lived this guide allow remote connections to install Win 7 PC. The configuration of the connection I want is only for the local home network.  In the firewall settings 'allow through firewall programs' Remote Desktop - RemoteFX is checked for audiences and home networks.

  If I disable the firewall of home network the phone connects easily and will control the PC.

  With firewall switched network phone will not connect and gives an error code 0 x 204. There is no notification of the computer, the firewall blocks a program.

  I just that it works with the firewall of network power.

  Hello Garym,

  Welcome to Microsoft Community forum.

  I suggest that you go through the information provided in the following MSDN blog and see if it helps.

  Remote Desktop Services blog

  To get help, I suggest you to post your query on TechNet Forums that the query you posted is more complex that can be answered on the community forum. The link is provided below.

  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you.

• Remote Desktop connection and file sharing

  Hello, I have a technical question about file sharing.

  I use a remote desktop connection to connect to the server of the company.  We are currently between the two groups of IT services (last guy retired, he will be missed!) In any case, I need to backup my desktop files locally and have 4 or 5 of these local desktop file files saved as a backup on the server.   I want to just my files desktop back mount easily on the server. And I don't know how / what to ask to do this. I just need to know what to ask.

  I'm having problems:

  1. I don't know how to configure a file to save its content on and through a secure server.

  2. There are two types of files that I am trying to backup my office.  The details are below.

  2. the first type of files are simple files of customer data, PDF files, word files, files is excellent. Thus, some records are filled with the updated forms and these files constantly increasing in number and size of the file.  A simple example of this type would be a Bill.  File grows in size and file number every week because the new files are always being added.

  2B. I can't accurately describe the second type of file.  We use a program called TFP - when you open the program you load the specific customer file in a drop-down box.  Whenever you open the customer specific AMTS program saves any changes you made to this file and updates the customer file with a new date and then transfers the file from the client to a file from archive in C: drive. Basically, I want to save this file on the server of the company.

  3. can we make us safe so that data gets only shared a way?  I don't want people on the server to change my desktop files.

  Feel free to ask any questions.   Thank you in advance.

  David

  Hello

  You can request the assistance of here:

  https://social.technet.Microsoft.com/forums/en-us/home

• I have a new server and you cannot use Remote Desktop connection.

  I HAVE A NEW SERVER (HP ML110 G6) AND HAVE USED OLD HARD DISKS, BUT MY REMOTE DESKTOP CONNECTION WILL NOT ME OR OTHERS - WHAT COULD THE REASON BE?

  Hello

  I suggest you to try the steps below and check if it helps.

   The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  May also need to do this on other computers as well.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Remote Desktop connection has encountered a problem and must be nearby

  When printing a tag printing in internet explore from a server terminal server. I get the message "Remote Desktop connection has encountered a problem and needs to close". I get disconnected from the terminal server. I updated the file screwdriver as well as pilots of the printer. The printer is a HP3600.

  Hi Marcus,

  The question you have posted is related to the server terminal server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• Remote Desktop connection has failed

  Sound you weird. Can I use Remote Desktop connection to connect to VPSes, but one day one of my VPSes suddenly did not work. I tried many solutions but has not worked. The weird part is other computer can easily connect to it but my computer cant, it keep said opening of remote connection... Can someone help me on this problem?
  Notice: I can connect to other VPSes but just that VPS is that I cant

  Hello

  
  Thank you for visiting the Microsoft Answers site.
  The question you have posted is related to remote desktop and would be better suited to the TechNet Windows community.
  Please visit the link below to find a community that will provide the support ask you: http://social.technet.microsoft.com/Forums/en-US/winserverTS/

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• How would enable remote desktop connection and asking for help?

  How would enable remote desktop connection and asking for help?

  Do you mean on this site?  Sorry, but we don't do that.  We do not have the software required to make the connection (it's too expensive to buy personally) and even if we did we would not get in this practice.  We work by display.

  If you mean for someone else to help you, here is the procedure: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remote Desktop connection between my Windows 7 and a new friends Windows 8.1

  Hello. My friend just got his first computer and is completely lost. She has absolutely no experience with a computer and a computerphobe of full tilt. We are 400 miles away and tried to help him by phone with little luck. To make things worse, I think that someone in which she rose to set his computer did not understand 8.1 either. I've been computing for a long time and have studied 8.1 and feel comfortable with it. But I never configured before remote connection and am unsure of certain things.

  First the operating environment:

  My computer: Inspiron 560 s under Windows 7 Home Premium.

  I'm on a home using Netgear network. I'm not using a wifi connection.

  His new computer: desktop HP Pavilion Slimline model 300-413 running Windows 8.1.

  I'm not sure of its network connections.

  Note: I use this to 8.1 as a guide (the link opens the guide for Windows 7...? But I use the guide for 8.1)... http://Windows.Microsoft.com/en-us/Windows/Remote-Desktop-connection-FAQ#1TC=Windows-8

  I think I can happen by steps 1.a. to 1.e. without any difficulty.

  Now the questions:

  1. in step 1.e.1. regarding 'Locations', I don't know what are the options it will present with or should I tell him to choose?

  2. to step 2.b. on the 'system', I know that she must see 'Computer name' and 'Working group', but I'm not sure what she's going to see in which area '? This does not appear on my version of Windows 7.

  3. If I can talk to him through this, she will be able to watch what I'm doing on his monitor?

  Please keep in mind that it is a perfect beginner so no instructions to its end should be as simple as possible, and I am new to 8.1 and uncertain as to what exactly she will see during the installation.

  She told me yesterday that she is so frustrated that she's almost ready to throw it all in the street and forget it. So any help and advice would be greatly appreciated. Thank you.

  Mark

  We can help you help questions.  Frankly McAafee exhale is a good thing IMHO.  I would never use it for multiple reasons

  It can remove using this program to uninstall McAfee and use Microsoft Security essentials

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  http://www.Microsoft.com/security_essentials/

• As he tried to establish a remote desktop connect between Windows 7 and Windows XP-error.

  Remote - Windows 7 for XP Pro desktop

  I am running Windows 7 Ultimate and try to use the Office XP Pro system remotely. I am the admin on both boxes and I have all of the necessary credentials. It errors I wonder if there are some parameters in 7 that I'm missing. Any suggestions?

  Hi Caslon540. Here's something that might help you troubleshoot:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-using-Remote-Desktop-connection

  Another thought, is that you will need to download a later version of connection desktop remotely (version 6.0 or later) so that XP can handle the incoming connection to Windows 7 that uses authentication NLA.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=26F11F0C-0D18-4306-ABCF-D4F18C8F5DF9&displaylang=en

  Hope that helps.

  Thanks for posting,

  Gloria Boyer
  Microsoft

• Several passwords for pop account are lost and the remote DESKTOP connections is no longer have registered credentials after logging out of the laptop to the domain and rebooted.

  Original title: passwords lost after reboot

  I have a user with multiple pop accounts and multiple rdp servers to which it connects

  When the laptop is connected to the domain he is allowed to save the credentials of rdp as usual and also its pop accounts work fine

  If the laptop is removed from the dock and hibernating come off hibernation works very well

  the problem starts when it restarts in fact the laptop when it is on the road.

  When he goes in outlook passwords for pop account are lost and all its Remote Desktop connections is no longer have recorded identification information

  his outlook passwords will save is no longer and rdp connections will save is no longer

  Once he returned to the office and connects back to the field all his pop account passwords are restored, the credentials of the rdp remain missing, but it can re - save them

  any ideas where to look for problem

  I also noticed inot laptopn with another user and will not experience the issue

  Hi, Robert Allen,.

  Thanks for posting your question in the Microsoft Community Forum.

  According to the description, you have a user facing problems with multiple pop accounts and rdp credentials when the connection / disconnection of a domain.

  Since the problem is associated with multiple pop accounts and rdp credentials when the connection / disconnection of a domain, the question you posted would be better suited for the IT Pro on TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.

• My remote desktop connection will not register

  Recently, my laptop crashed and I completely restored it to factory settings. I didn't use it much, but recently, my remote desktop connection did not work as I restored it. My school has a server where I can connect to the server, but it has not worked at all and says "the logon attempt has failed. I know it's just my phone because it works on the desktop...

  Hi Emily,.

  I would say to contact your school TO verify what settings/connection information is necessary for configuring the desktop remotely.

  As your question is more complex that what is generally answered in the Microsoft Answers forums, it suits better for Windows Server on TechNet forum. You can also ask your question in the Forums TechNet Remote Desktop Services (Terminal Server Services) for assistance.