Remote ESXi hosts show that "not responding".

Similar Questions

• 5.0 ESXi hosts all say "not responding" after a while

  Hi all

  First of all, yes I know this is a repetition of something that is posed before but I tried all the resolutions that I can find - nothing has worked so far.  In the vSphere client, all hosts currently have a status of "not responding". For reference, however, here is what I have tried/checked so far:

  -vCenter and ESXi are all in evaluation mode.

  -I do not use the brand HP ESXi ISO (as referenced by http://communities.vmware.com/message/1852500 more numerous other positions of the community).  Material * is * HP hardware, though.

  -Change of the security policy of vCenter Server (as referenced by http://communities.vmware.com/thread/271809).

  -Go through all checks VMware published listed in http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003409.

  -Network connectivity verified using PING, nslookup and telnet on port 902.  All ESXi hosts respond on port 902.

  -AD DNS monitoring verifies that all say "Pass".

  -There is no firewall on the network (it has physically isolated from everything, including the internet... obviously I am writing this post on another network).

  -Direct connection to the ESXi hosts works very well - this only happens when connecting through vCenter (so running virtual machines are available and usable without any problem... There is no HA).

  -/etc/VMware/VMware.LIC has a license of '0' key (confirms the status of the evaluation, I think).

  -/etc/vmware/vmware.lic mode is the following... - rw - T.

  -All hosts are on the same version of ESXi.

  -There is only 1 Server vCenter.

  A strange thing is that some items, including VMware ones, say to run 'rpm' and 'service' in a variety of different ways.  'Rpm' or 'service' are valid commands on my ESXi servers.  This seems odd, unless ESXi 5.0 withdrew these commands to the shell.

  Can anyone suggest anything else that might be the cause?

  Thank you!

  If VC is virtual and the problem that happens on the same ESXi what they are and all on the same subnet, I am almost sure that something on your windows it blocks. Check the steps in KB http://kb.vmware.com/kb/1029919 to try to discover what is happening.

• Every time I open my webcaam is showing that not found webcam or webcam is not working properly

  Original title: webcam problem

  I have a laptop Dell Inspiron N4020 Pentium bicoeur with Uttimate 32 bit Win7. But now there is a problem. My web cam is not working. Every time I open my webcaam is showing that not found webcam or webcam is not working properly. I installed a new software of I m not successful. So now, how I have useful?

  Is - this problem is hardware or software. Every time I go to the Device Manager there is no camera or webcam device. Is there a solution?

  Thank you.

  HerohetoChakma,

  The webcam appears under devices in the Manager of imaging devices? In the contrary case and the computer is under warranty, contact the Support Technology Guide.

  You can try...

  Webcam test

  Rick

• help help... ESX host shows that only ANSWERS DO NOT

  Hello

  I have the ESX host, who said State says "NOT RESPONDING" status virtual Center, but the host's who responded and I am able to connect to the console using PuTTY... Can someone help me what could be the problem to show the status as no ANSWERS DO NOT... I do not see that error correct logs in the logs events and... The virtual machine that is hosted on the ESX host also works very well and im able to RDP to it with all the problems but in VM, it shows as disconnected...

  ASK YOU TO HELP ME QUICKLY BECAUSE IT IS IN THE PRODUCTION...

  Hey Shashi,

  If the ESX host is unresponsive defeated VC if you can connect to the host ESX via VI Client, if yes, then the service pass works very well and you need to troubleshoot the service virtual Center on the esx host agent. You many consider them raise all initially with order # service vmware-vpxa restart

  If you are unable to connect to the ESX host using VI Client, restart the service spend using service # mgmt - vmware restart and check the logs # tail f /var/log/vmware/hostd.log check for errors/progress.

  Also look at kb.vmware.com for that matter and you'll find some articles that may help you solve problems.

  All the best

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Windows Media Player shows suddenly "not responding" it does not open

  My Windows Media Player is fine and dany until a week ago and then I tried to open it and he was "unresponsive".  I rebooted a zillion times, I did a virus scan, scan for spy ware, has checked a drive, run scandisk, has done a defrag, disk clean up, use my registry cleaner and fixer, restore my computer to an earlier date, re-registration of files such as regsvr32 wmp.dll, uninstalled a plug-in Foxfire WMP and almost everything that appeared in an internet search as a remedy as possible and still it does not work.

  In the old days you can uninstall and reinstall the software non-functional, but not with Windows Media Player.  So where can I look to find the source of the problem or to find a solution so that it could respond?  If I double click on a music file on my computer that it will play in Windows Media Player, but once there I can not open the library or click on the tabs as it will then show "not responding".  Please, someone must have an answer that can help.

  I use Vista 64.

  Hello

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.
  ----------------------------------------------------------

  An InPlace upgrade might work:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• VMware ESXI host Client is not compatible with the Ipad

  Hi all

  First of all I want to say that I am very happy with the introduction of the ESXI host Client, it's a very good start for not having a vSphere client to be installed.

  One thing I was hoping too is compatible with mobile devices, for example, an IPad. Unfortunately this isn't the case. Not for IOS 8 or 9

  I tried several browsers without a bit of luck.

  There are several problems;

  • The page is not scaling properly
  • The top bar is not visible, you can, for example, sign out
  • The Web page expands when you rotate the page on the iPad horizontally, not having not not able to see the Web page complete.

  I found these problems in Tech Preview, build 2015.08.25.3015331 combined with ESXI 6 with the latest patch

  Kind regards

  Marcel

  Hi Marcel,.

  Thanks for pointing out these problems. We have made a few improvements wrt. support iPad in the last version of the adventure. Could you update and let me know how it goes?

• Unidad USB connect a remote ESXi host para copy ahi una VM

  Hola Comunidad!

  Host of I have an ESXi 4.1 con several VM running pero Necesito UN liberar espacio y tengo una VM 1.5 to Quebec City are no utilizo pero no quiero eliminarla sin mas.

  Como el host are remote y the VM are huge, no puedo descargarla por internet y he pensado en un disco para copiarla pero ahi 2 TB USB conectarla no se if the host the reconocera that comandos debo emplear or el sistema archivos than debe tener said disco.

  If pudieran help me, would be very grateful.

  A cordial saludo,

  Alvaro.

  You must connect el of esta donde el en USB host ESXi VM for the con sistema archivo NTFS y luego desde vSphere Client editas VM y mallards a USB controller y luego peripheral USB.

  Editor captured.

  A greeting.

• Host shows as "Not found" in custom webview.

  I'm running a problem with the launch of the workflows of a webview custom since the vCO to vCO 5.1 4.2.1.  When start a workflow and selecting an object (host, network, data store, etc.), the selected item will change to "not found".  I am able to select with the help of another applicant (treeview or list) or by typing the name of and by selecting in the menu dropdown.

  

  For my case of test as in the photo above, I deployed a new vCO device 5.1 (vCO configured and installed vCenter plugin only) and a new default template webview.  The only change I made to the template add the following link to default.html in the tag of the vco.

  <a jwcid="@vco:WorkflowLink" workflow="newVm" isDialog="true">New VM</a>
  

  The Web mode attribute 'newVm' is of type workflow and designates the workflow of library "Create simple virtual machine."  I logged in the Web using an ID mode who is a Director of vCO.  The screenshot above is after the launch of the workflow and the selection of a host for the "Host" field on which to create... ».  The really strange thing is that this problem will not occur when you use the Web webview!  The section spans server.log attached connection time to the webview just after the problem occurs.  Any ideas as to why this is happening?

  Found this: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2048629

  That looks like you can be on the right track to solve this problem.

• Command Host shows does not exit

  Hello
  I am not able to view the output of the host of sqlplus command (I use a windows XP OS).
  
  The commands I tried:
  
  SQL > $whoami
  
  
  SQL > host whoami
  
  SQL >! whoami
  
  -Thank you
  Moulay abdelhafid Verreault

  Solomon Yakobson says:
  And keep in mind, SQL * more host command will open a command window, run the command, and close the command window

  To avoid this, you can use:

  host cmd /k %username% echo

  or

  host cmd /k %USERDOMAIN%\%USERNAME% echo

  Then SQL * more will open the command window, run the echo command and will not command windows close (because/k has been used). You have to manually issue the exit command in the command window to close.

  SY.

• Disconnected ESXi host cannot reconnect to VCenter

  ESXi 4.0.0 Releasebuild-261974

  VCenter 4.0.0 build 162856

  VSphere 4.0.0 build 162856

  I have a host on the 16 who became disconnected from VCenter recently. I spent some time online means to join new host in VCenter, but each has failed so far. I'm not avoiding perform a reboot of the host due to production VMS are residing thereon. Also, I can't access the Web page for the host, which works very well for the other guests, we have running: https://

  I am able to ping both the IP address and the name of FQDN of the host successfully.

  I did the following things in the hope of resolving, who all have failed:

  1 restart the Management Agents on ESXi host from the windows of the customization of the system.

  2. test the management successfully and rebooted network management network

  3A tried to reconnect to the host via VSphere

  4 registered and the Mode of Support Tech executed the following command: /sbin/services.sh restart when I run this command, I notice that the vmware-aam service does not start.

  Error messages:

  1. (in an attempt restore the link) cannot communicate with the specified host. The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  2 (of the newspaper of the Management Agent) panic HttpNfcSvc another process is listning IDE oucederomsurlesecondport 12001; Please ensure that another instantiation of pass run; Cannot initialize the service of httpnfc.

  3. (journal of the VirtualCenter Agent) 0x1499bb90 error 'App' could not discover the ofr is authenticating with host agent version. ; could not resolve version ofr is authenticating with host agent. ; Temporary creation connect spec: localhost:443.

  4. (of the newspaper of the VirtualCenter Agent) 0x1499bb90 error 'App' SSLStreamImp::BIORead (0x2e408bb0) has expired; SSL connection failed with error BIO

  [5 (journal of the VirtualCenter Agent) HttpUtil::ExecuteRequest] error in sending request - SSL Exception: transfer the SSL expired local: 127.0.01:63355 peer: 127.0.0.1:443

  Any suggestions would be greatly appreciated! Let me know if you need to work as well with more information.

  Thank you!

  BOE

  It is an ugly one. At least a restart if not re-install. To minimize downtime, you can close out of virtual machines to the inventory and put them on another host/cluster.

  ___________________

  A +, EASD, MCP, MCSA, MCSE, MCTS, MCITP, MCDBA, NCDA, VCP4

  If you find this or any other answer useful please consider giving points by checking the correct or helpful answer.

• ESXi host change IP back to the old Configuration in vCenter

  Hi all! I'm having a problem with a host computer in my vCenter. I had 2 guests and both were in the same network. I moved to a remote site and change its IP from 10.10.2.253 to 10.10.3.250.

  While I'm trying to connect it to the vCenter, he connects well then (in vCenter) he's trying to connect to his old address IP 10.10.2.253.

  I have reset the vCenter, database, but it still does not work. When I move first the host at the remote site, I did not disconnect. I deleted it just (may be the source of this problem).

  Can someone help me on this one? A big thank you.

  Hi Alex,

  is it possible for you to create a record of host DNS (A) for this remote ESXi host name and then add to vCenter using its FULL domain name rather than IP address?

• Director of the laboratory - cannot export to ESXi host (SMBMount unsupported)

  Hi all

  I had this problem since the liberation.  This is my environment:

  Director of the laboratory of 4.0.1

  vCenter 4.0 Update 1

  ESXi (3 guests) 4.0 Update 1

  Shared storage: EMC SAN with NAS volume on gigabit ethernet.

  I opted to use on ESX ESXi VMWare's future, as far as development.

  My problem is this: when I click to export a configuration of Lab Manager, it fails with "Error in export."  The details of the message are:

  * Error export the Configuration.

  vCenter Lab Manager cannot find that any suitable host connected to the "NFS Datastore" data store for this operation.

  Host 'ESXi1' is an ESXi host and does not support smbmount.*

  I installed ESXi being under the impression he was supposed to have all the same functionality as ESX.  Now, I have myself screwed... my users will sometimes have to export configurations to test booting the VMS of USB dongles (as there is no USB transfer directly to a virtual computer that it's time to start).  If at least 3 times a week I have to export virtual machines, one by one, to a network share, which is quite tedious and quite annoying.

  Is on the timeline of development?  I noticed that the 4.0.2 has been released, but by its requirements (http://www.vmware.com/support/labmanager40/doc/releasenotes_labmanager402.html#newfeatures) it does not support ESXi 4.x, which is strange because the requirements for Lab Manager 4.0.1 (http://www.vmware.com/support/labmanager40/doc/releasenotes_labmanager40.html) list ESXi 4.0 as a host in charge.

  Can someone please shed some light on this issue and maybe get it on the development plan for the next version of Lab Manager?

  Thank you!

  -Jesse Reinhart

  stemplar,

  We don't do generally no update notes version after a product has been released.

  In addition, it is not specific to Lab Manager, ESXi does not support required... orders so Lab Manager is just stating the restriction of resource pools provided.  As far as I remember, ESXi did not support smbmount (or mount-t smbfs) since its inception.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• ESXi host profile

  Greetings,

  I'm currently upgrading my 5.1 to 5.5 however ESXi hosts, it is not a rhythm in upgrade more as a new installation since I'm changing some resources on my servers. I create a profile of the host of one of my hosts, but my question is, can I still use the host profile Version 5.1 on version 5.5 hosts?

  Thank you!

  Yes, you can and it works perfectly.  However, if you have any questions you should carefully test this.

• Adding static routes to ESXi host

  Hello

  Is it possible using PowerCLI to add static routes to ESXi host? If not, is there another way to add roads without using the console?

  Hello, leitsu-

  Yes, it is possible with PowerCLI.  Take a look at the New-VMHostRoute cmdlet.

• 5.1 ESXi host is showing that does not

  Hi all

  We are to vCenter 5.5 with Environment 5.1 ESXi hosts. On one of our ESXi hosts, we sometimes get to see 5.1 ESXi, (build 799733) host is not responding and the virtual machines on this subject are displayed as status disconnected at the end of their names.

  When this happens, we are able to ping on the ESXi host and virtual machines are also able to ping / react to what is good, but he continues to be on different hosts at different times, all what I do when this occurs is to try to reconnect on the ESXi host and it connects fine and machines virtual hosting on she will return to the State normal and everything will be normal on this host. I want to understand why this is happening at different times and on different hosts of ESXi and ensure that this should not happen again in the future or find the before root cause is even worse.

  so, could someone please look at this and let me know where to start troubleshooting this to find the root cause.

  Thanks in advance

  Your vCenter and ESXi host is on the same subnet? In any case, I recommend you take a look at this article and apply the patch suggested: VMware KB: hosts ESXi and ESX disconnect randomly VMware vCenter Server